共找到 1300 条与 相关的标准,共 87 页
本标准规定了装用液体燃料的汽车燃油箱的安全性能要求和试验方法。 本标准还规定了汽车燃油箱在车辆上安装的安全要求。 本标准适用于M\N和O类汽车的金属燃油箱和塑料燃油箱。
Safety property requirements and test methods for automobile fuel tank and its installation
Diesel engines—Fuel filters—Method for evaluating fuel/water separation efficiency
Fuel filter—Initial single-pass efficiency test method
Filling receptacle of CNG vehicle
Filling receptacle of LPG vehicle
本标准规定了柴油机具有垂直安装面的燃油滤清器滤座的安装和连接尺寸、本标准适用于螺栓固定的滤清器和装有GB/T 28953-2012规定的外径不大于88 mm的旋装式燃油滤清器滤座、
Automotive diesel.Heads for fuel filters with vertical flange.Mounting and connecting dimensions
本标准规定了汽车柴油机用旋装式燃油滤清器互换性的基本尺寸和标记方法。 本标准适用于汽车柴油机用旋装式燃油滤清器。 旋裝式燃油濾清器的優選結構是不帶內部密封圈的,它們在第2 章中作出規定。 如果需要內部密封圈,可選用附錄A的濾清器結構。 相应滤清器接头参见ISO7310 ISO7311(见参考文献)。 2 尺寸和公差
Automotive diesel.Spin-on fuel filters for diesel engines.Mounting and connecting dimensions
本标准规定了柴油机旋装式燃油滤清器滤座的安装和连接尺寸、本标准适用于装有GB/T 28953-2012规定的外径不大于88 mm的旋装式燃油滤清器、
Automotive diesel.Heads for fuel filters with horizontal flange.Mounting and connecting dimensions
本标准规定了汽车柴油机用双级燃油滤清器的安装和连接尺寸a 本标准适用于汽车柴油机用双级燃油滤清器。 2 尺寸和公差
Automotive diesel.Two-stage fuel filters for compression-ignition engines.Mounting and connecting dimensions
本标准规定了汽车柴油机燃油滤清器〈简称滤清器)的性能试验方法y从而使滤清器的试验室性能试验结果具有可比性”本标准适用于额定体积流量(或标称体积流量)在200 L/h 以下的汽丰柴油机燃油濾清器‥对额定体积流量大于200 L/h 的滤清器可参照使用。
Test methods of fuel filter for automotive compression ignition engines
本标准规定了全地形车燃油箱的安全性能要求和试验方法。 本标准适用于全地形车用的各种金属燃油箱和非金属燃油箱。
Safety property requirements and test method for fuel tanks of all-terrain vehicles
本标准规定了全地形车燃油箱的安全性能要求和试验方法。 本标准适用于全地形车用的各种金属燃油箱和非金属燃油箱。
Safety property requirements and test method for fuel tanks of all-terrain vehicles
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles―Specification
本部分规定了液化石油气汽车加气口(快插件)的定义、型式、要求、试验方法、检验规则、标志、包装、出厂文件、运输及贮存。 本部分适用于使用符合GB 19159要求的汽车用液化石油气为工作介质,公称工作压力为2.2MPa(本标准所述压力值均为表压),工作环境温度为-40℃~60℃的液化石油气汽车加气口。
Filling receptacle of LPG vehicle-Part 2:Insert
本标准规定了在用汽车改装为汽油/液化石油气两用燃料汽车的改装技术要求。 本标准适用于液化石油气额定工作压力为2.2MPa的汽油/液化石油气两用燃料汽车的改装。
The technical criterion of refitting for vehicle by using gas--Liquefied petroleum gas vehicle(LPGV)
本标准规定了在用汽车改装为汽油/压缩天然气两用燃料汽车的改装技术要求。 本标准适用于天然气额定工作压力不大于20MPa的汽油/压缩天然气两用燃料汽车的改装。
The technical criterion of refitting for vehicle by using gas--Compressed natural gas for vehicle(CNGV)
本标准规定了汽车用液化石油气加气口的型式、技术要求、试验方法、检验规则、标志、包装、出厂文件、运输及贮存(定义见GB/T 17895)。 本标准适用于使用符合SY 7548要求的汽车用液化石油气为工作介质,公称工作压力为2.2MPa(本标准所述压力值均为表压),工作环境温度为-40~60℃的液化石油气汽车加气口。
Filling receptacle of LPG vehicle (spiral)
本标准规定了汽车用压缩天然气加气口的型式、技术要求、试验方法、检验规则、标志、包装、出厂文件、运输及贮存(定义见GB/T 17895)。 本标准适用于使用符合SY 7546要求的汽车用压缩天然气为工作介质,公称工作压力为20 M Pa(本标准所述压力值均为表压)的汽车用压缩天然气加气口。
Filling receptacle of CNG vehicle
本标准规定了以汽油、柴油为燃料的汽车燃油箱的安全性能要求和试验方法。 本标准适用于M类和N类汽车的金属燃油箱和塑料燃油箱。
Safety property requirements and test methods for automobile fuel tank
本标准规定了汽油车供油系抗气阻能力的道路试验方法。 本标准适用于装用汽油发动机的汽车。
Motor vehicles--Vapor lock for fuel system--Test method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号