43.060.40 标准查询与下载
共找到 1300 条与 相关的标准，共 87 页
What is ISO 20766 ‑ 13 – LPG multivalve fuel systems for vehicles about? The multivalve is one of the most important mechanical components of the LPG system. ISO 20766 is an International Standard series on road vehicle LPG fuel systems. ISO 20766 ‑ 13 specifies general information regarding the multivalve component of LPG fuel, intended for use on motor vehicles. ISO 20766 ‑ 13 is the 13 th part of the ISO 20766 multi-series, and specifies general requirements for the multivalve component of LPG fuel, intended for use on the types of motor vehicles as defined in ISO 3833 . ISO 20766 ‑ 13 is applicable to vehicles (mono-fuel, bi-fuel, or dual-fuel applications) using gaseous fuels in accordance with ISO 9162 . All references to pressure in ISO 20766 ‑
Road vehicles. Liquefied petroleum gas (LPG) fuel system components - Multivalve
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-31
- 实施
- 2022-01-31
What is ISO 20766 ‑ 16 - Injectors and fuel rail for LPG vehicles about? The fuel rail supplies the injectors with fuel with minimal pressure fluctuations between individual injections. ISO 20766 is an International Standard series on road vehicle LPG fuel systems. ISO 20766 ‑ 16 specifies general information regarding injectors and gas mixing device/fuel rail component of LPG fuel, intended for use on motor vehicles. ISO 20766 ‑ 16 is the 16 th part of the multi-series, and specifies general requirements for the injectors and ...
Road vehicles. Liquefied petroleum gas (LPG) fuel system components - Injectors and gas mixing device/fuel rail
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-31
- 实施
- 2022-01-31
Diesel engines -- NOx reduction agent AUS 32 -- Part 5: Refilling interface for passenger cars
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-20
- 实施
Direct injection gasoline engines -- Installation of the high pressure fuel pump to the engine
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-20
- 实施
This document specifies water quality used for water injection in internal combustion engines. This document defines quality requirements for injection water including instructions for storage, container materials and production. Testing procedures are also defined.
Road vehicles — Injection water — Part 1: Quality requirements
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-17
- 实施
This document specifies general requirements for the injectors and gas mixing device/fuel rail, components of liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 16: Injectors and gas mixing device/fuel rail
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-04
- 实施
This document specifies general requirements and definitions of the gas connection component of liquefied petroleum gas fuel, it is intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 25: Gas connections
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-04
- 实施
This document specifies general requirements for the vaporizer/pressure regulator, a component of liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 14: Vaporizer/pressure regulator
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-04
- 实施
This document specifies general requirements and definitions for the gas tube component of liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 24: Gas tubes
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-04
- 实施
This document specifies general requirements for the multivalve component of liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 13: Multivalve
- ICS
- 43.060.40
- CCS
- 发布
- 2022-01-04
- 实施
1 Scope This document specifies tests and requirements for the flexible fuel line, a compressed natural gas (CNG) fuel system component in accordance with SAE J517 (100R8 hose) or JIS B 8362 intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using natural gas in accordance with ISO 15403‑1. It is not applicable to the following: a) liquefied natural gas (LNG) fuel system components located upstream of, and including, the vaporizer; b) fuel containers; c) stationary gas engines; d) container-mounting hardware; e) electronic fuel management; f) refuelling receptacles.
Road vehicles. Compressed natural gas (CNG) fuel system components. Flexible fuel line
- ICS
- 43.060.40
- CCS
- 发布
- 2021-12-31
- 实施
- 2021-12-31
This document specifies tests and requirements for the flexible fuel line, a compressed natural gas (CNG) fuel system component in accordance with SAE J517 (100R8 hose) or JIS B 8362 intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using natural gas in accordance with ISO 15403-1. It is not applicable to the following: a) liquefied natural gas (LNG) fuel system components located upstream of, and including, the vaporizer; b) fuel containers; c) stationary gas engines; d) container-mounting hardware; e) electronic fuel management; f) refuelling receptacles.
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible fuel line
- ICS
- 43.060.40
- CCS
- 发布
- 2021-12-01
- 实施
1 Scope This document applies only to Dimethyl Ether refuelling connectors hereinafter referred to as devices, constructed entirely of new, unused parts and materials. Dimethyl Ether refuelling connectors consist of the following components, as applicable: a) Nozzle (mounted on dispenser side). b) Receptacle (mounted on vehicle). This document applies to devices which use Dimethyl Ether as fuel, hereinafter referred to in this document as D15 [see 9.1 c)]. This document applies to devices with standardised mating components. This document applies to connectors which prevent Dimethyl Ether vehicles from being fuelled by fuel station dispensers for other gaseous fuels. This document is applicable to: Dimethyl Ether in accordance with ISO 16861. NOTE All references to pressures (kPa) throughout this document are considered gauge pressures unless otherwise specified.
Road vehicles. Dimethyl Ether (DME) refuelling connector
- ICS
- 43.060.40
- CCS
- 发布
- 2021-11-30
- 实施
- 2021-11-30
This document specifies the minimum design, construction, test requirements and the critical dimensions for filling nozzles for the dispensing of automotive Liquefied Petroleum Gas (LPG) to vehicles of categories M and N, as defined in Regulation (EU) 2018/858 [2], that are fitted with the Euro filling unit (light duty or heavy duty).
LPG equipment and accessories - Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
- ICS
- 43.060.40
- CCS
- 发布
- 2021-11-24
- 实施
- 2022-02-28
BS ISO 20766-7. Road vehicles. Liquefied petroleum gas (LPG) fuel system components - Part 7. Remotely controlled service valve with excess flow valve
- ICS
- 43.060.40
- CCS
- 发布
- 2021-11-03
- 实施
- 2021-11-03
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles — Amendment 1
- ICS
- 43.060.40
- CCS
- 发布
- 2021-10-26
- 实施
Diesel engines. Cleanliness assessment of fuel injection equipment
- ICS
- 43.060.40
- CCS
- 发布
- 2021-10-20
- 实施
- 2021-10-20
Road vehicles – Dimethyl Ether (DME) refuelling connector (ISO 21058:2019)
- ICS
- 43.060.40
- CCS
- 发布
- 2021-10-14
- 实施
- 2021-10-14
Road vehicles. Liquefied natural gas (LNG) fuel system components. Gas-tight housing and ventilation hose
- ICS
- 43.060.40
- CCS
- 发布
- 2021-10-13
- 实施
- 2021-10-13
Road vehicles. Liquefied natural gas (LNG) fuel system components. Automatic valve
- ICS
- 43.060.40
- CCS
- 发布
- 2021-10-12
- 实施
- 2021-10-12
