49.025.99 其他材料 标准查询与下载

SAE AMS3680D-2015 绝缘、导热硅胶纤维

This specification covers a silica fiber insulation in the form of felted pads, flat or in rolls, as ordered.

Insulation, Thermal Silica Fiber

SAE AMS3808B-2015 胶带、粘合剂、压敏遮蔽

This specification covers three types of masking materials in the form of pressure-sensitive adhesive tape.

Tape, Adhesive, Pressure-Sensitive Masking

SAE AMS7848D-2015 钽合金 棒材 90Ta 10W（UNS R05255）

This specification covers a tantalum alloy in the form of bars and rods up through 3.5 inches (88.9 mm), inclusive.

Tantalum Alloy@ Bars and Rods 90Ta - 10W (UNS R05255)

SAE AMS7910D-2015 铍近净预制件标准级冷等静压 烧结

This specification covers beryllium in the form of bar, rod, tubing, and shapes fabricated from beryllium powder consolidated by cold isostatic pressing (CIP) and sintering.

Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed@ Sintered

SAE AMS7904E-2015 铍棒 棒材 管材 和型材高延展性等级

This specification covers beryllium in the form of bars, rods, tubing, and machined shapes fabricated from vacuum hot pressed powder.

Beryllium Bars@ Rods@ Tubing@ and Shapes High Ductility Grade

SAE AMS7906D-2015 铍棒 棒材 管材 和形状标准等级

This specification covers beryllium in the form of bars, rods, tubing, and machined shapes from vacuum hot pressed powder.

Beryllium Bars@ Rods@ Tubing@ and Shapes Standard Grade

SAE AMS7847D-2015 钽合金片材 带材 和板材 90Ta 10W（UNS R05255）

This specification covers a tantalum alloy in the form of sheet, strip, and plate from 0.010 through 0.250 inch (0.25 through 6.35 mm), inclusive.

Tantalum Alloy Sheet@ Strip@ and Plate 90Ta - 10W (UNS R05255)

SAE AMS5660L-2015 镍铁合金 耐腐蚀和耐热 棒材和锻件 12.5Cr 42.5Ni 6.0Mo 2.7Ti 0.015B 34Fe 自耗电极重熔或真空感应熔化溶液 稳定 和沉淀热处理（UNS N09901）

This specification covers a corrosion and heat-resistant nickel-iron alloy in the form of bars and forgings 5 inches (127 mm) and under, and forging stock of any size. (See 8.5)

Nickel-Iron Alloy@ Corrosion and Heat-Resistant@ Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution@ Stabilization@ and Precipitation Heat Treated (UNS N09901)

SAE AMS5711E-2015 镍合金 耐腐蚀和耐热 棒材 锻件 和环 65Ni 15.8Cr 15.2Mo 0.30Al 0.05La 固溶热处理（UNS N06635）

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading.

Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Solution Heat Treated (UNS N06635)

SAE AMS7849E-2015 钽片 条带 和板材退火（UNS R05210）

This specification covers tantalum in the form of sheet, strip, plate, and foil up through 0.1875 inch (4.75 mm), inclusive.

Tantalum Sheet@ Strip@ and Plate Annealed (UNS R05210)

SAE AMS7908D-2015 铍近净预制件标准级热等静压

This specification covers beryllium in the form of bar, rod, tubing, and shapes fabricated from beryllium powder consolidated by hot isostatic pressing (HIP).

Beryllium Near-Net Preforms Standard Grade Hot Isostatic Pressed

SAE AMS4555K-2015 含铅黄铜 无缝管 66.5Cu 32.5Zn 0.48Pb 轻度退火（050）（UNS C33000）

This specification covers a copper alloy (leaded brass) in the form of seamless tubing.

Leaded Brass@ Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050) (UNS C33000)

SAE AMS7907D-2015 铍棒 棒材 管材 和形状仪器级

This specification covers beryllium in the form of bars, rods, tubing, and machined shapes fabricated from vacuum hot pressed powder.

Beryllium Bars@ Rods@ Tubing@ and Shapes Instrument Grade

SAE AMS4520L-2015 含铅磷青铜带 88.5Cu 4.0Sn 4.0Pb 3.0Zn 0.26P 冷轧 半硬（HO2）（UNS C54400）

This specification covers a copper alloy in the form of strip. This strip has been used typically for rolled, split bushings, but usage is not limited to such applications.

Leaded Phosphor Bronze Strip 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P Cold Rolled@ Half Hard (HO2) (UNS C54400)

SAE AMS4535D-2015 铜铍合金 机械管 98Cu 1.9Be 固溶和沉淀热处理（TF00 以前称为 AT）（UNS C17200）

This specification covers a copper beryllium alloy in the form of mechanical tubing. This tubing has been used typically for parts requiring a combination of high strength, wear resistance, and corrosion resistance and where thermal conductivity, electrical conductivity, and low magnetic susceptibility may be important, but usage is not limited to such applications. While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.

Copper-Beryllium Alloy@ Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ formerly AT) (UNS C17200)

SAE AMS5878D-2015 镍合金 耐腐蚀和耐热 片材 带材 和板材 59Ni 22Cr 2Mo 14W 0.35AI 0.03La 固溶热处理（UNS N06230）

This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate 0.015 to 1.5 inch (0.38 to 38 mm) in nominal thickness. these products have been used typically for parts requiring oxidation resistance up to 2100 °F (1149 °C) and relatively high strength up to 1800 °F (982 °C), but usage is not limited to such applications.

Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 59Ni - 22Cr - 2Mo - 14W - 0.35AI - 0.03La Solution Heat Treated (UNS N06230)

SAE AMS5706M-2015 镍合金 耐腐蚀和耐热 棒材 锻件 和环材 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr 自耗电极或真空感应熔炼 1825 至 1900 ○ 解决方案热处理（UNS N07001）

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings.

Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 ��Solution Heat Treated (UNS N07001)

GOST R 56465-2015 空间系统. 基于用作火箭发动机推力室部件 (定位和校正脉冲) 的陶瓷基复合材料和炭炭复合材料的非金属材料. 分类. 指标命名

Space systems. Nonmetallic materials based on ceramic-matrix and carbon-carbon composites used as rocket engine thrusters parts (orientation and correction pulse). Classification. Nomenclature of indices

GOST R 56466-2015 空间系统. 材料试验方法. 高温条件下线性热膨胀系数复合材料的测定方法

Space systems. Materials test methods. Method of determining the linear thermal expansion coefficient composites at high temperatures

GOST R 56467-2015 空间系统. 粉末金属和金属复合材料. 分类. 指标命名

Space systems. Powder metal and metal composite materials. Classification. Nomenclature of indices