49.025.99 其他材料 标准查询与下载

GOST R 56467-2015 空间系统. 粉末金属和金属复合材料. 分类. 指标命名

Space systems. Powder metal and metal composite materials. Classification. Nomenclature of indices

SAE AMS5766E-2014 合金 耐腐蚀和耐热 棒材和锻件 21Cr 32.5Ni 0.38Ti 0.38Al 45Fe 固溶热处理（UNS N08800）

This specification covers a corrosion and heat-resistant iron-nickel-chromium alloy in the form of bars and forgings 4.0 inches (102 mm) and under, and forging stock of any size.

Alloy@ Corrosion and Heat-Resistant@ Bars and Forgings 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated (UNS N08800)

SAE AMS5873F-2014 镍合金 耐腐蚀和耐热 板材 带材 和板材 65Ni 15.8Cr 15.2Mo 0.30AI 0.05La 自耗电极重熔 固溶热处理（UNS N06635）

This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate.

Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La Consumable Electrode Remelted@ Solution Heat Treated (UNS N06635)

SAE AMS1448B-2014 机场的沙,雪,冰控制

This specification covers natural sand in granular form.

Sand, Airport Snow and Ice Control

SAE AMS5950C-2014 52.5Ni-19Cr-3.0Mo-5.0Cb-0.90Ti-0.50Al-18Fe可沉淀硬化、溶解热处理、真空感应和自耗电极熔炼的镍合金耐腐蚀和耐热薄板材和带材

This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet and strip 0.080 inch (2.03 mm) and under in nominal thickness.

Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable

SAE AMS2372G-2014 质量保证取样和测试,碳钢和低合金钢钢锻件

This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable specification requirements of carbon and low-alloy steel forgings.

Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings

SAE AMS5669B-2014 可耗电极或真空感应熔化的耐腐蚀和耐热镍基合金棒材15.5Cr-0.95(Cb+Ta)-2.5Ti-0.70Al-7.0Fe

Primarily for machined parts requiring high strength at temperatures in the range of 800 - 1100 F (427 - 593 C), particularly where welding is involved.

Alloy Bars, Corrosion and Heat Resistant, Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe, Consumable Electrode or Vacuum Induction Melted

HB 8421-2014 航空用铠装热电偶电缆规范

本规范规定了航空产品或装置用铠装热电偶电缆的要求、质量保证规定及交货准备等。 本规范适用于航空用产品或装置用铠装热电偶电缆(以下简称航空铠缆)。

Specification for sheathed thermocouple cable for aviation

ASTM D6790/D6790M-14 确定蜂窝芯的泊松比的标准测试方法

5.1 Certain sandwich panel analyses require the Poisson''s ratio of the honeycomb core. It is not possible to measure the honeycomb''s Poisson''s ratio by standard methods. 5.2 This test method provides a standard method of determining the Poisson’s ratio of honeycomb core materials for design properties, material specifications, research and development applications, and quality assurance. 5.3 Factors that influence the Poisson’s ratio of honeycomb core materials and shall therefore be reported, include the following: core material, methods of material fabrication, core geometry, core thickness, core thickness uniformity, cell wall thickness, specimen geometry, specimen preparation and specimen conditioning. 1.1 This test method covers the determination of the sandwich honeycomb core Poisson''s ratio from the anticlastic curvature radii, see Fig. 1. FIG. 1 Anticlastic Curvature 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Within the text, the inch-pound units are shown in brackets. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores

SAE AMS5390G-2014 47.5Ni-22Cr-1.5Co-9Mo-0.6W-18.5Fe(N-12MV)耐热和耐腐蚀的镍合金熔模毛胚铸件

This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings.

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.6W - 18.5Fe (N-12MV) As-Cast

SAE AMS5391H-2014 真空铸造的耐热和耐腐蚀镍合金熔模毛胚铸件73Ni-13Cr-4.5Mo-2.3Cb-0.75Ti-6.0Al-0.010B-0.10Zr

This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings.

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 73Ni - 13Cr - 4.5Mo - 2.3Cb - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast

SAE AMS5396F-2014 耐热和耐腐蚀镍合金熔模铸件65Ni-28Mo-5.5Fe-0.4V(N-12MV)

This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings.

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.4V (N-12MV), As-Cast

SAE AMS5388K-2014 53.3Ni-16.5Cr-17Mo-4.5W-5.8Fe-0.40V (CW-12MW)耐腐蚀和耐热镍合金熔模毛胚铸件

This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings.

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), As-Cast

SAE AMS5755G-2014 固溶热处理的含64Ni-5.0Cr-24.5Mo-5.5Fe耐腐蚀和耐热的镍合金棒材,锻件和环件

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 64Ni - 5.0Cr - 24.5Mo - 5.5Fe, Solution Heat Treated

SAE AMS4985E-2014 可选型热均衡加压退火或指定的6Al-4V 130 UTS, 120 YS, 6% EL钛合金熔模铸造件

This specification covers a titanium alloy in the form of investiment castings.

Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified

SAE AMS5845J-2014 20Cr-35Ni-35Co-10Mo真空感应和自耗电极真空再熔炼溶解热处理、加工增强和老化的耐腐蚀合金圆形棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars.

Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged

SAE AMS5844H-2014 20Cr-35Ni-35Co-10Mo真空感应和真空自耗电极真空再熔炼溶解热处理和加工增强的耐腐蚀合金圆形棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars.

Alloy, Corrosion-Resistant, Round Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated and Work Strengthened

SAE AMS5758J-2014 20Cr-35Ni-35Co-10Mo加工增强的真空感应和自耗电极真空再熔炼溶解热处理的耐腐蚀合金棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars.

Alloy, Corrosion-Resistant, Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated for Work Strengthening

SAE AMS3002H-2014 变性乙基乙醇

This specification covers a denatured ethyl alcohol in the form of a liquid.

Alcohol, Denatured Ethyl

SAE AMS3004H-2014 甲醇

This specification covers methyl alcohol in the form of a liquid.

Alcohol, Methyl