49.080 航空航天用流体系统和零部件 标准查询与下载

23/30429699 DC BS ISO 7661 航空航天流体系统 用于轴向对准的管线的夹具块 设计标准和鉴定测试（公制系列）

BS ISO 7661 Aerospace Fluid systems. Clamp blocks for tube lines having axial alignment. Design standard and qualification testing (Metric series)

ASTM F312-08(2023) 薄膜过滤器上航空航天流体微粒的微观尺寸测定和计数的标准试验方法

Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

ISO/DIS 7661:2023 航空航天流体系统 - 用于具有轴向对准的管线的夹具块 - 设计标准和鉴定测试（公制系列）

Aerospace Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing (Metric series)

ISO/DIS 5859:2023 航空航天系列液压和气动系统及元件示意图的图形符号

Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components

BS ISO 3323:2023 飞机 液压元件 标记以表明组件已批准用于的流体

1   Scope This document establishes a scheme for the marking of components (other than pipelines, hoses and fittings) used in aircraft hydraulic systems, so that the correct type of fluid is readily apparent during any assembly or testing operations in workshops. The marking is not intended to serve any purpose when a component is installed in an aircraft.

Aircraft. Hydraulic components. Marking to indicate the fluid for which a component is approved

ISO 3323:2023 飞机 液压部件 标记以表明部件已批准使用的流体

This document establishes a scheme for the marking of components (other than pipelines, hoses and fittings) used in aircraft hydraulic systems, so that the correct type of fluid is readily apparent during any assembly or testing operations in workshops. The marking is not intended to serve any purpose when a component is installed in an aircraft.

Aircraft — Hydraulic components — Marking to indicate the fluid for which a component is approved

ISO/CD 7661:2023 航空航天 流体系统 具有轴向对准的管路夹块 设计标准和鉴定测试 公制系列

Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series

ISO/DIS 8575:2023 航空航天系列 流体系统 液压系统油管

Aerospace series — Fluid systems — Hydraulic system tubing

23/30466266 DC BS ISO 18170 航空航天系列 交流感应电动机驱动、变量输送、液压泵 一般要求

BS ISO 18170. Aerospace series. AC induction electric motor driven, variable delivery, hydraulic pumps. General requirements

23/30461164 DC BS ISO 14085-3 航空航天系列 液压滤芯试验方法第3部分：过滤效率和截留能力

BS ISO 14085-3. Aerospace series. Test methods for hydraulic filter elements - Part 3. Filtration efficiency and retention capacity

KS W ISO 12334-2022 航空航天 液压、压力补偿、变量输送泵 35 000 kPa 系统的一般要求

Aerospace－Hydraulic, pressure compensated, variable delivery pumps－ General requirements for 35 000 kPa systems

ASTM F862-11(2022) 航空航天液压液pH值和氯离子浓度的标准实施规程

1.1 This practice covers the measurement of the pH and chloride ion of water extraction of aerospace hydraulic fluids. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids

BS ISO 8177:2021 航天 用于流体系统的 Omega 夹具（鞍形夹具） 方面

1   Scope This document specifies maximum and minimum dimensions for omega clamps (saddle clamps) installed by means of two bolts with nominal diameters of 5 mm. The specified dimensions define a dimensional envelope. This document is not an interchangeability standard. The tolerances for each type of clamp are defined in the drawings in the standards for parts.

Aerospace. Omega clamps (saddle clamps) for fluid systems. Dimensions

ISO 8177:2021 航空航天.流体系统用欧米茄夹（鞍形夹）.尺寸

This document specifies maximum and minimum dimensions for omega clamps (saddle clamps) installed by means of two bolts with nominal diameters of 5 mm. The specified dimensions define a dimensional envelope. This document is not an interchangeability standard. The tolerances for each type of clamp are defined in the drawings in the standards for parts.

Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions

BS ISO 7320:2021 航天 用于流体系统的螺纹密封联轴器 方面

Aerospace. Couplings, threaded and sealed, for fluid systems. Dimensions

FprEN 3077-2021 航空航天系列夹具蜗杆传动技术规范

Aerospace series - Clamps worm drive - Technical specification

KS W 1614-2021 航空航天 平（毛刺）垫圈

Aerospace－Flat(burr) washer

PN-EN 3572-2021-08 E 航空航天系列 公称压力6800kPa及8°30'钛制管件的带波纹内管的PTFE软管总成 产品标准

Aerospace series -- PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6 800 kPa and 8°30' fitting in titanium -- Product standard

DIN EN 3572:2021 航空航天系列 标称压力高达 6 800 kPa 和 8°30' 钛管接头的带回旋内管的 PTFE 挠性软管组件 产品标准

This document specifies the dimensions of a hose assembly which is in accordance with ISO 7313. The hose assembly couples to the fittings specified in EN 3274, which are made out of titanium. The hose is protected either by means of an anti-abrasive, anti-shock and anti-projectio

Aerospace series - PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6 800 kPa and 8°30' fitting in titanium - Product standard; German and English version EN 3572:2021

OENORM EN 3572-2021 航空航天系列 标称压力高达 6800 kPa 的带回旋内管和 8°30' 钛接头的 PTFE 挠性软管组件 产品标准

Aerospace series - PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6800 kPa and 8°30' fitting in titanium - Product standard