59.080.40 涂覆织物 标准查询与下载

LST EN ISO 22751:2020 橡胶或塑料涂层织物 物理和机械试验 弯曲力的测定（ISO 22751:2020）

Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)

OENORM EN ISO 3303-2:2020 橡胶或塑料涂层织物 破裂强度的测定 第2部分：液压法（ISO 3303-2:2020）

Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020)

HG/T 3050.2-2020 橡胶或塑料涂覆织物 整卷特性的测定 第2部分：测定单位面积的总质量、单位面积的涂覆质量和单位面积的底布质量的方法

Determination of properties of whole rolls of rubber or plastic coated fabrics Part 2: Methods for determination of total mass per unit area, coating mass per unit area and mass of base fabric per unit area

HG/T 3050.1-2020 橡胶或塑料涂覆织物 整卷特性的测定 第1部分：测定长度、宽度和净质量的方法

Determination of properties of whole rolls of rubber or plastic coated fabrics Part 1: Methods for determination of length, width and net mass

HG/T 3050.3-2020 橡胶或塑料涂覆织物 整卷特性的测定 第3部分：测定厚度的方法

Determination of properties of whole rolls of rubber or plastic coated fabrics Part 3: Method for determination of thickness

DIN EN ISO 22751:2020 橡胶或塑料涂层织物. 物理和机械试验. 弯曲力的测定(ISO 22751-2020); 德文版 EN ISO 22751-2020

This document establishes a test method for determining the bending strength of textiles coated with rubber or plastic.

Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020); German version EN ISO 22751:2020

DIN EN ISO 3303-2:2020 橡胶或塑料涂层织物. 爆破强度的测定. 第2部分: 液压法(ISO 3303-2-2020); 德文版 EN ISO 3303-2-2020

This document specifies a method for the determination of the bursting strength of rubber - or plastics -coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both operated by hydraulic pressure. The type A test machine is applicable to mat

Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020); German version EN ISO 3303-2:2020

DIN EN ISO 3303-1:2020 橡胶或塑料涂层织物. 顶破强力的测定. 第1部分: 钢球法(ISO 3303-1-2020); 德文版本EN ISO 3303-1-2020

This document specifies a method for the determination of the bursting strength of rubber or plastics coated fabrics, using a mechanically operated steel ball.

Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020); German version EN ISO 3303-1:2020

BS EN ISO 22751:2020 橡胶或塑料涂层织物 物理和机械测试 弯曲力的测定

What is ISO 22751 about ?    ISO 22751 discusses rubber or plastic-coated fabrics. ISO 22751 specifies a test method for the determination of the bending force of rubber or plastics-coated fabrics.   Who is ISO 22751 for ?   ISO 22751 on a determination of bending force of rubber or plastic-coated fabrics is useful for:   Plastic-coated...

Rubber or plastic coated fabrics. Physical and mechanical test. Determination of bending force

LST EN ISO 3303-2:2020 橡胶或塑料涂层织物 破裂强度的测定 第2部分：液压法（ISO 3303-2:2020）

Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method (ISO 3303-2:2020)

BS EN ISO 3303-1:2020 橡胶或塑料涂层织物 耐破强度的测定钢球法

What is ISO 3303-1 about?    ISO 3303 discusses rubber or plastics-coated fabrics. ISO 3303-1 provides a test method to determine the strength of rubber or plastic-coated fabrics. The bursting strength of the fabric is determined by using a mechanically operated steel ball.     Rubber and plastic - coated fabrics can be used for luggage, protective clothing, medical substrates, airbags, geotextiles, sports, and many other diverse end-product uses. Quantifying the bursting strength of the fabric helps you to determine what application the material is best suited for.   Who is ISO 3303-1 for?   ISO 3303-1 on the bursting strength of coated fabrics is useful for:  

Rubber- or plastics-coated fabrics. Determination of bursting strength - Steel-ball method

T/ZZB 1965-2020 家具用水性聚氨酯合成革

本文件规定了家具用水性聚氨酯合成革的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于以水性聚氨酯树脂为主要原料，经干法、湿法聚氨酯加工工艺以及后整理工艺而制成的家具用水性聚氨酯合成革。

Waterborne polyurethane synthetic leather for furniture

ABNT NBR 16912-2020 织物 - 粘合抗拉强度的测定

Texture - Determination of adhesion tensile strength

T/ZZB 1817-2020 箱包手袋用无溶剂聚氨酯革

本文件规定了箱包手袋用无溶剂聚氨酯革的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于以非织造布、纬编针织布为布基，以多元醇混合物、异氰酸酯预聚体等为主要原料生产的用于箱包手袋的无溶剂聚氨酯革。

Solvent-free polyurethane leather for luggage and handbag

UNI EN ISO 22751:2020 橡胶或塑料涂层织物 物理和机械试验 弯曲力的测定

Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force

UNI EN ISO 3303-2:2020 橡胶或塑料涂层织物 破裂强度的测定 第2部分：液压法

Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method

UNI EN ISO 3303-1:2020 橡胶或塑料涂层织物 破裂强度的测定 第1部分：钢球法

Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method

BS EN ISO 3303-2:2020 橡胶或塑料涂层织物 耐破强度的测定-水力法

What is ISO 3303-2 about?    ISO 3303 discusses rubber or plastics-coated fabrics. ISO 3303-2 provides a test method to determine the strength of rubber or plastic-coated fabrics. ISO 3303-2 describes the hydraulic method to determine the bursting strength of rubber or plastic-coated fabrics.   The hydraulic method involves using one of two types of diaphragm bursting testers, designated type A and B, both operated by hydraulic pressure.    NOTE 1- The type A test machine applies to materials having bursting strengths ranging from 350 kPa to 5 500 kPa and the type B test machine applies to materials of bursting strengths ranging from 70 kPa to 1 400 kPa. 

Rubber- or plastics-coated fabrics. Determination of bursting strength - Hydraulic method

EN ISO 3303-1:2020 橡胶或塑料涂覆织物.撕裂强度的测定.第1部分:钢球法

This document specifies a method for the determination of the bursting strength of rubber or plastics coated fabrics, using a mechanically operated steel ball.

Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel-ball method (ISO 3303-1:2020)

EN ISO 22751:2020 橡胶或塑料涂层织物物理和机械试验弯曲力的测定

This document specifies a test method for the determination of the bending force of rubber or plastics-coated fabrics.

Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)