59.080.40 涂覆织物 标准查询与下载
共找到 885 条与 涂覆织物 相关的标准，共 59 页
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2 : martindale abrader
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2021-09-08
- 实施
- 2021-11-13
本文件规定了汽车用超细纤维聚氨酯贴面革的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。 本文件适用于以海岛型双组分或多组分纤维针刺加工成基布,经水性聚氨酯湿法浸渍、开纤、染色、干法涂层等后整理工艺制成的车用超细纤维聚氨酯贴面革。
Micro-fiber polyurethane veneer leather for automotive
- ICS
- 59.080.40
- CCS
- C292
- 发布
- 2021-09-06
- 实施
- 2021-09-27
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test
- ICS
- 59.080.40
- CCS
- 发布
- 2021-09-01
- 实施
- 2021-09-01
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2021)
- ICS
- 59.080.40
- CCS
- 发布
- 2021-09-00
- 实施
Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method
- ICS
- 59.080.40
- CCS
- 发布
- 2021-09-00
- 实施
This document specifies two methods of evaluating the resistance of rubber- or plastics-coated fabrics to the action of liquids by measurement of selected properties of the materials before and after immersion in selected liquids. The two methods are as follows: — Method A: total immersion with liquid; — Method B: one surface side immersion with liquid.
Rubber- or plastics-coated fabrics - Determination of resistance to liquids
- ICS
- 59.080.40
- CCS
- W59
- 发布
- 2021-09-00
- 实施
This document describes methods for the determination of compensation values for orthotropic coated fabrics (different properties along ideally perpendicular directions, such as the weft and warp yarns for woven based coated fabrics, or along the courses and wales of knitted base
Rubber- or plastics-coated fabrics - Mechanical test methods under biaxial stress states - Part 2: Determination of the pattern compensation values; German version EN 17117-2:2021
- ICS
- 59.080.40
- CCS
- 发布
- 2021-09-00
- 实施
本文件规定了汽车用热塑性聚烯烃弹性体（TPO）复合片材（以下简称“复合片材”）绿色设计产品的评价要求，描述了生命周期评价报告编制方法、评价方法。 本文件适用于汽车用热塑性聚烯烃弹性体（TPO）复合片材的绿色设计产品评价。
Green Design Product Evaluation Technical Specifications for Thermoplastic Polyolefin Elastomer (TPO) Composite Sheets for Automobiles
- ICS
- 59.080.40
- CCS
- C292
- 发布
- 2021-08-26
- 实施
- 2022-06-02
本文件规定了汽车方向盘用聚氨酯束状超细纤维合成革的分类、要求、检验规则及标志、包装、运输、贮存，描述了相应的试验方法。 本文件适用于以海岛复合纤维制成的非织造布为底基、经聚氨酯树脂浸渍、湿法凝固、减量处理、后整理及干法贴面等一系列工艺制成的汽车方向盘用聚氨酯束状超细纤维合成革的生产、检验和销售。
Polyurethane fascicular microfiber synthetic leather for Automobile steering wheel
- ICS
- 59.080.40
- CCS
- C292
- 发布
- 2021-08-26
- 实施
- 2022-06-28
本文件规定了汽车用人造革与合成革针织基布的产品分类、要求、检验规则以及标志、包装、运输和贮存，描述了相应的试验方法。 本文件适用于以化学纤维或者天然纤维为主要原料，采用针织织机进行织造，通过后整理设备加工而成的汽车用人造革与合成革针织基布的生产、检验和销售。
Knitted backing fabric of artificial leather and synthetic leather for automobile
- ICS
- 59.080.40
- CCS
- C292
- 发布
- 2021-08-26
- 实施
- 2022-06-28
This document specifies two separate methods for determining the resistance of a material to wet and dry abrasion. It is applicable to the coated surface or surfaces of coated fabrics. It does not apply to determining the abrasion behaviour of an uncoated surface of a coated fabric, for which the methods for uncoated textiles described in the ISO 12947 series apply.
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
- ICS
- 59.080.40
- CCS
- 发布
- 2021-08-23
- 实施
- 0000-00-00
Rubber- or plastics-coated fabrics. Mechanical test methods under biaxial stress states. Determination of the pattern compensation values
- ICS
- 59.080.40
- CCS
- 发布
- 2021-08-05
- 实施
- 2021-08-05
Rubber- or plastics-coated fabrics – Mechanical test methods under biaxial stress states – Part 2: Determination of the pattern compensation values
- ICS
- 59.080.40
- CCS
- 发布
- 2021-08-03
- 实施
- 2021-08-03
Rubber- or plastics-coated fabrics. Determination of resistance to ozone cracking under static conditions
- ICS
- 59.080.40
- CCS
- 发布
- 2021-07-29
- 实施
- 2021-07-29
This specification establishes the minimum requirements for the hydrostatic resistance or "waterproofness" of fabrics coated with rubber or plastics. This document does not cover water repellency or water resistance of the same materials. The test specimens should be cut to specifications and at random from a roll of coated fabric. The hydrostatic tester should be able to apply the required amount of pressure and sustain it for a specified time. The apparatus should be equipped with two concentric ring clamps with rounded inside edges to avoid cutting the specimen. The lower clamp should be fitted with a seal to prevent leakage during testing.
Standard Specification for Coated Fabrics—Waterproofness
- ICS
- 59.080.40
- CCS
- 发布
- 2021-07-01
- 实施
1.1 This specification covers the requirements for vinylcoated glass yarn insect screening and louver cloth. 1.2 This specification is intended to assist ultimate users by designating the sizes and types of these products that are generally available in the industry. 1.3 This specification shows the terminology and requirements for: 1.3.1 Commercial standard vinyl-coated glass yarn insect screening designed and woven primarily for installation in or on any dwelling, patio, screening enclosure, building, or structure for the purpose of keeping out flies, mosquitoes, and most insects. 1.3.2 Vinyl-coated glass yarn louver cloth used extensively in soffit and louver vents to keep out most large insects, birds, and airborne litter, while at the same time providing for adequate ventilation and air circulation. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 The following precautionary caveat pertains only to the test methods portions, Sections 8 – 19, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Insect Screening and Louver Cloth Woven from
- ICS
- 59.080.40
- CCS
- 发布
- 2021-07-01
- 实施
Rubber- or plastics-coated fabrics - Mechanical test methods under biaxial stress states - Part 2: Determination of the pattern compensation values
- ICS
- 59.080.40
- CCS
- 发布
- 2021-07-00
- 实施
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test
- ICS
- 59.080.40
- CCS
- 发布
- 2021-07-00
- 实施
This document specifies a method for the determination of the resistance of fabrics coated with rubber or plastics to ozone cracking under static conditions. The test is designed to determine the relative resistance to cracking of fabric coated with rubber or plastics when exposed under static strain to air containing ozone in the absence of direct sunlight. Like all ageing tests, it should be considered as a means of comparing articles of the same composition and destined for the same application, but not as an absolute criterion. It is preferable to limit the significance of the test by considering it only as a means of control when a fabric attains a resistance superior to a threshold given in comparison with a certain type of degradation. Taking these remarks into account, the results obtained at the time of test cannot be taken as a prediction of the length of life of the product.
Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
- ICS
- 59.080.40
- CCS
- G30
- 发布
- 2021-07-00
- 实施
本文件规定了阻燃型仿麂皮沙发面料的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于以海岛型超细纤维针织麂皮绒为基材，采用离型转印、复合、压花、背涂阻燃胶等工艺加工而成的阻燃型仿麂皮沙发面料。
Flame retardant suede sofa fabric
- ICS
- 59.080.40
- CCS
- C177
- 发布
- 2021-06-28
- 实施
- 2021-08-04
