共找到 1518 条与 铝和铝合金 相关的标准,共 102 页
Methods for chemical analysis of aluminium and aluminium alloys—Part 28:Determination of cobalt content—Flame atomic absorption spectrometry
Methods for chemical analysis of aluminium and aluminium alloys—Part 11:Determination of lead content
Chemical analysis methods for sacrificial anodes of Al-Zn-In system alloy
GB/T 20975的本部分规定了铝及铝合金中砷含量的测定方法。 本部分适用于铝及铝合金中砷含量的测定,铝及铝合金中所有共存元素均不干扰砷的测定。方法一测定范围为:>0.000 5%~0.020%;方法二测定范围为:0.000 002%~0.000 5%。
Methods for chemical analysis of aluminium and aluminium alloys.Part 2:Determination of arsenic content
GB/T 20975的本部分规定了铝及铝合金中汞含量的测定方法。 本部分适用于铝及铝合金中汞含量的测定,铝及铝合金中所有共存元素均不干扰汞的测定。方法一测定范围为:>0.000 1%~0.010%;方法二测定范围为:0.000 001%~0.000 1%。
Methods for chemical analysis of aluminium and aluminium alloys.Part 1:Determination of mercury content
GB/T 20975的本部分规定了铝及铝合金中铈、镧、钪含量的测定方法。 本部分适用于铝及铝合金中铈、镧、钪含量的测定,铝及铝合金中铝对铈、镧、钪的测定有干扰,采取在工作曲线中加入等量的铝消除干扰,铈、镧、钪三种元素相互不干扰,其他共存元素均不干扰测定。测定范围:铈:0.005%~0.90%,镧:0.005%~0.50%,钪:0.000 2%~0.50%。
Methods for chemical analysis of aluminium and aluminium alloys.Part 27:Determination of cerium, lanthanum, scandium.Inductively coupled plasma atomic emission spectrometry method
Technical specification of 500kA aluminum electrolytic cell
Deformed aluminum alloy precision forgings—General specifications
Classification and recycling and utilization of wrought aluminium and aluminium alloy scraps—Part 2:Recycling of scraps
Classification and recycling and utilization of wrought aluminium and aluminium alloy scraps—Part 1:Classification of scraps
Classification and recycling and utilization of wrought aluminium and aluminium alloy scraps—Part 3:Utilization of scraps
High purity alumina for sapphire substrate
Unalloyed aluminium ingots for remelting
GB/T 14849的本部分规定了工业硅中钛含量的测定方法。 本部分适用于工业硅中钛含量的测定,测定范围(质量分数):0.001 0%~0.30%。
Methods for chemical analysis of silicon metal.Part 9:Determination of titanium content.Diantipyryl methane spectrophotometry
GB/T 14849的本部分规定了工业硅中磷含量的测定方法。 本部分适用于工业硅中磷含量的测定,测定范围(质量分数):0.001 0%~0.30%。
Methods for chemical analysis of silicon metal.Part 7:Detemination of phosphorus content.Phosphorus molybdenum blue spectrophotometry
GB/T 14849的本部分规定了工业硅中铜含量的测定方法。 本部分适用于工业硅中铜含量的测定,测定范围(质量分数):0.001 0%~0.50%。
Methods for chemical analysis of silicon metal.Part 8:Determination of copper content.Atomic absorption spectrometric method
GB/T 14849的本部分规定了工业硅中铁、铝、钙、锰、镍、钛、铜、磷、镁、铬、钒、钴含量的测定方法。本部分适用于工业硅中铁、铝、钙、锰、镍、钛、铜、磷、镁、铬、钒、钴含量的测定,测定范围见表1。
Methods for chemical analysis of silicon metal.Part 5:Determination of impurity contents.X-ray fluorescence method
GB/T 14849的本部分规定了工业硅中铁、铝、钙、锰、钛、镍、铜、铬、钒、镁、钴、磷、钾、钠、铅、锌、硼含量的测定方法。本部分适用于工业硅中铁、铝、钙、锰、钛、镍、铜、铬、钒、镁、钴、磷、钾、钠、铅、锌、硼量的测定。各元素测定范围见表1。
Methods for chemical analysis of silicon metal.Part 4:Determination of impurity contents.Inductively coupled plasma atomic emission spectrometric method
GB/T 14849的本部分规定了工业硅中碳含量的测定方法。本部分适用于工业硅中碳含量的测定,测定范围:0.010%~0.50%。
Methods for chemical analysis of silicon metal.Part 6:Determination of carbon.Infrared absorption method
本标准规定了乘用车铝合金车轮铸件(简称“铸件”)的技术要求、试验方法和检验规则,以及标志、包装、贮存和运输。本标准适用于采用金属型铸造的乘用车铝合金车轮铸件。
Aluminum alloy wheel castings for passenger car
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号