77.140.01 钢铁产品综合 标准查询与下载

ASTM A1008/A1008M-23 具有改进成形性、所需硬度、固溶硬化和烘烤硬化性能的结构高强度低合金、高强度低合金钢冷轧薄钢板标准规范

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Har

ASTM E2142-08(2023) 用扫描电子显微镜评定和分类钢中夹杂物的标准试验方法

Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope

ASTM A1008/A1008M-23e1 具有改进成形性、所需硬度、固溶硬化和烘烤硬化性能的结构高强度低合金、高强度低合金钢、冷轧薄钢板的标准规范

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Har

T/CIET 141-2023 钢铁行业绿色除尘技术规范

本文件规定了钢铁行业绿色除尘技术的术语和定义、一般要求、规划设计、系统配置、系统安装、以及运行管理。 本文件适用于钢铁行业的绿色除尘系统的设计、安装及运行管理。

Technical specifications for green dust removal in the steel industry

T/CIET 100-2023 钢铁行业零碳工厂评价规范

本文件规定了钢铁行业零碳工厂评价的术语和定义、零碳工厂实施、评价要求、评价结果信息应用及公开等内容。 本文件适用于以焦化、烧结、球团、炼铁、炼钢、轧钢等为主要工序的钢铁联合企业建立和实现零碳工厂及第三方评价机构针对零碳工厂的评价活动。

Evaluation specification for zero-carbon factories in the iron and steel industry

T/CIET 042-2023 绿色设计产品评价技术规范 钢质汽车锻件

本文件规定了钢质汽车锻件绿色设计产品的术语和定义、评价原则和方法、评价要求、产品生命周期评价报告编制方法。 本文件适用于钢质汽车锻件绿色设计产品的评价。

Green Design Product Evaluation Technical Specification for Steel Automobile Forgings

T/CIET 065-2023 钢铁行业绿色企业评价规范

本文件规定了钢铁行业绿色企业评价的目的和范围、评价原则及要求、评价指标体系及要求、评价程序、评价报告。 本文件适用于钢铁行业绿色企业管理的评价和改进，可用于企业自我评价，第二方（相关方）或第三方组织评价。

Evaluation Standards for Green Enterprises in Iron and Steel Industry

T/CSTA 0032-2023 钢铁企业环境、社会和治理（ESG） 第2部分 评价要求

本文件规定了钢铁企业环境、社会和治理（ESG）的评价原则、评价指标体系和评价方法、评价分类、评价程序和评价报告。 本文件适用于开展ESG评价活动的钢铁企业。

Steel Enterprise Environmental, Social and Governance (ESG) Part 2 Evaluation Requirements

T/CIECCPA 006-2023 钢铁厂含铁尘泥均质化处理技术要求

本文件规定了钢铁企业含铁尘泥均质化处理的术语和定义、原理和工艺、技术要求等内容。 本文件适用于钢铁企业在原料准备、烧结、球团、炼铁、炼钢、轧钢等生产过程中产生的含铁尘泥均质化处理。

Technical requirement for homogenized mixing on iron-bearing dust and sludge from steelworks

T/CIECCPA 005-2023 烧结球团工艺脱硫副产物改质产品

本文件规定了烧结球团工艺脱硫副产物改质产品的术语和定义、分类与标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于烧结球团工艺半干法脱硫灰（CaSO3·1/2H2O）和湿式脱硫石膏（CaSO4·2H2O）改质后的产品。

Modified product of desulphurization by-product from sintering and pelletizing process

ISO 404:2013/Amd 1:2022 钢和钢制品.一般交货技术要求.修改件1

Steel and steel products — General technical delivery requirements — Amendment 1

GSO ISO 630-1:2022 结构钢 第1部分：热轧产品一般交货技术条件

This document specifies the general technical delivery conditions for steel flat and long products (plates/ sections/wide flats and bars) used principally for general-purpose structural steels. The steels specified in this document are intended for use in welded or bolted structures. The specific requirements for structural steels are given in the individual parts of ISO 630. This document does not include the following structural steels, some of which are covered by other International Standards: —    sheet and strip: refer to ISO TC 17/SC 12 “Continuous mill flat rolled products”; —    tubular products: refer to ISO TC 5/SC 1 “Steel tubes”. NOTE 1    Lists of standards covered by ISO/TC 17/SC 12 and ISO/TC 5/SC 1 are available on the ISO website. NOTE 2    In all parts of ISO 630, the term of "thickness" is considered as "nominal thickness", unless otherwise stated.

Structural steels — Part 1: General technical delivery conditions for hot-rolled products

ASTM A1040-17(2022) 说明锻制碳素, 低合金和合金钢用协调标准等级组合的标准指南

1.1 This guide covers ASTM Subcommittees A01.02, A01.03, A01.06, A01.09, A01.11, A01.15, A01.19, A01.22, and A01.28 for specifying chemical composition limits of wrought carbon, low-alloy, and alloy steels. It is intended that these recommended grade composition limits be suitable for adoption by other standardization bodies that prepare standards for carbon, low-alloy, and alloy steel products, including discontinued steels. 1.2 Included in this guide are the recommendations for determining the number of significant figures for specifying chemical composition. 1.3 The carbon and alloy steel grades in all standards overseen by the aforementioned ASTM subcommittees have been included, except those grades applicable to restricted special end uses. 1.4 Not addressed are minor composition modifications that a specific ASTM subcommittee may find necessary to accommodate effects of normal processing or to enhance fabricability by the producer or user, or both. 1.5 Also not generally addressed (except where established by ASTM subcommittees) is a complete rationalization of all limits, especially where such would conflict with long-standing practices and is not justified by special technical effect. 1.6 This guide does not address discontinued or formerly standard steel grades. A listing of such steel grades can be found in SAE J1249. Also excluded from this guide are cast materials and welding filler metals. 1.7 In 1995, the AISI made the decision to transfer the responsibility of maintaining its numbering system to the Society of Automotive Engineers (SAE) for carbon and alloy steels (SAE J403 and SAE J404) and to ASTM International for stainless steels (Guide A959 and others). To inform users of this important event, historical information is included in the appendix of this standard. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels

T/CMES 34005-2022 高炉煤气余压透平机承缸（激光熔覆）再制造技术规范

本文件规定了高炉煤气余压透平机承缸（激光熔覆）再制造技术规范的拆解、表面处理、检查评定、分类、再制造加工、检验、标识、记录、存档、包装、贮存。 本文件适用于高炉煤气余压透平机承缸（激光熔覆）再制造技术规范（以下简称承缸）。

Technical specification for remanufacturing of blast furnace gas residual pressure turbine bearing cylinder (laser cladding)

T/SSEA 0186-2022 模具钢产品质量分级和评价方法

本文件规定了模具钢产品质量分级和评价的评价指标体系、评价方法以及等级标识。 本文件适用于模具钢产品的质量分级和评价。

Die steel product quality classification and evaluation method

T/CSTA 0010-2022 模具钢产品质量分级和评价方法

本文件规定了模具钢产品质量分级和评价的评价指标体系、评价方法以及等级标识。 本文件适用于模具钢产品的质量分级和评价。

Die steel product quality classification and evaluation method

T/CISA 193-2021 输电铁塔用耐候钢螺栓与螺母

本文件规定了输电铁塔用耐候钢螺栓与螺母的术语和定义、型式、尺寸及公差、技术要求、检验项目及验收检查、试验方法、标志、包装及质量证明书。 本文件适用于大气腐蚀性等级为C1～C3、螺纹规格为M10～M39的耐候钢六角头螺栓（以下简称“螺栓”）、耐候钢脚钉（以下简称脚钉）、耐候钢六角螺母（以下简称“螺母”）、耐候钢六角薄螺母（以下简称“薄螺母”）及耐候钢平垫圈（简称以下“平垫圈”）。电力金具及其他耐候钢结构用耐候钢紧固件可参照执行。

Weathering steel bolts and nuts for transmission towers

T/CISA 192-2021 耐候钢锈层稳定性检测方法

本文件规定了耐候钢锈层试样处理要求、检测方法、数值修约、检测报告。 本文件适用于建筑、铁路车辆、集装箱、塔架、桥梁等领域用耐候钢锈层稳定性的检测。

Method for testing the stability of weathering steel rust layer

T/CI 017-2021 稀土耐候钢高速公路护栏

3.1  稀土耐候钢Ⅰ类  rare earth weathering steel Ⅰ 在GB/T 700中的Q235普碳钢或GB/T 1591中的Q355低合金高强度钢的基础上，通过添加少量的稀土元素（rare earth elements），在金属基体表面形成致密稳定的氧化保护层，使钢的耐大气腐蚀性能大幅度提高的钢。 3.2  稀土耐候钢Ⅱ类  rare earth weathering steel Ⅱ 在传统耐候钢基础上，通过添加少量的稀土元素（rare earth elements），可适当减少合金元素Cu、Cr、Ni等的含量，在金属基体表面形成致密稳定的氧化保护层，钢的耐大气腐蚀性能仍满足要求的钢。 3.3  稀土耐候钢高速公路护栏  highway guardrail made of rare earth weathering steel 一种利用稀土耐候钢Ⅰ类（3.1）和/或稀土耐候钢Ⅱ类（3.2）加工成型的高速公路用波形梁钢护栏。 4　分类和代号 5　产品规格 6　加工工艺 7　技术要求 8　测试方法 9　设计、施工及质量验收 10　检验规则 11　标志、包装、运输和贮存

Highway guardrail made of rare earth weathering steel

ASTM A1008/A1008M-21a 冷轧碳素结构钢薄板高强度低合金高强度低合金具有改进的成形性所需硬度固溶硬化和烘烤硬化的高强度低合金的标准规范

1.1 This specification covers cold-rolled, carbon, structural, high-strength low-alloy, high-strength low-alloy with improved formability, required hardness, full hard, solution hardened, and bake hardenable steel sheet, in coils and cut lengths. 1.2 Cold rolled steel sheet is available in the designations as listed in 4.1. 1.3 This specification does not apply to steel strip as described in Specification A109/A109M. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Har