77.140.25 弹簧钢 标准查询与下载

GSO ISO 8458-2:2014 机械弹簧用钢丝 第2部分：专利冷拔非合金钢丝

This part of ISO 8458 specifies requirements for cold-drawn non-alloy steel wire for the manufacture of mechanical springs for static duty and dynamic duty applications, complying with the general requirements of ISO 8458-1.

Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire

GSO ISO 6931-1:2014 弹簧用不锈钢 第1部分：线材

1.1 This part of ISO 6931 applies to the grades of wrought stainless steels listed in table 1, which are used in the work-hardened condition in the form of wire up to about 10 mm in diameter, for the production of springs and spring parts that are exposed to corrosive effects and sometimes slightly increased temperatures (see A.1 in annex A). 1.2 In addition to the steels listed in table 1, certain of the steel grades covered by ISO 683-13 are also used for springs, although to a much lesser extent. In these cases, the physical properties (tensile strength etc.) shall be agreed between user and supplier. 1.3 In addition to this part of ISO 6931, the general technical delivery requirements of ISO 404 are applicable.

Stainless steels for springs -- Part 1: Wire

GSO ISO 6931-2:2014 弹簧用不锈钢 第2部分：薄带

This part of ISO 6931 applies to cold-rolled narrow strip of thicknesses up to and including 3 mm, in rolled widths less than 600 mm, made from the stainless steel grades listed in Table 1. The steels are used in the conditions given in Tables 4, 5 and 6 for the production of springs and spring parts that are exposed to corrosive effects and, sometimes, slightly elevated temperatures. Steel grades other than those listed in Table 1, but covered by ISO/TS 15510, can be supplied in the above conditions after agreement between the manufacturer and purchaser (see also Annex A). The general technical delivery conditions specified in ISO 404 apply, in addition to the specifications of this part of ISO 6931, unless otherwise specified in this part of ISO 6931.

Stainless steels for springs -- Part 2: Narrow strip

YB/T 4372-2014 弹簧钢热轧钢带

本标准规定了弹簧钢热轧钢带的分类与代号、订货内容、尺寸、外形重量及其允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。本标准适用于厚度不大于12mm、宽度不大于600mm的弹簧钢热轧钢带(以下简称“钢带”)。

Hot-rolled spring steel strips

KS D ISO 9442-2013 钢 弹簧片用热轧带肋和沟槽扁钢 公差和尺寸

Steel－Hot-rolled ribbed and grooved flats for spring leaves－Tolerances and dimensions

KS D ISO 9442:2013 钢 制弹簧片用热轧筋及带槽的扁钢 公差及尺寸

Steel－Hot-rolled ribbed and grooved flats for spring leaves－Tolerances and dimensions

NB/T 20008.14-2013 压水堆核电厂用其他材料.第14部分:镍 -铬-铁合金弹簧丝

本标准规定了压水堆核电厂用镍-铬-铁合金弹簧丝的制造、化学成分、力学性能和工艺性能、金相组织、表面质量和尺寸、外形、质量及允许偏差等技术要求。本标准适用于压水堆核电厂控制棒组件、堆内构件和驱动机构用直径小于等于8 mm的镍-铬-铁合金弹簧丝。

Additional materials for Pressurized water reactor nuclear power plants.part 14: Nickel-chromium-iron alloy wires of springs

GSO ASTM A689:2012 弹簧用碳钢和合金钢棒材的标准规范

1.1 This specification covers hot-wrought steel bars to be used for the manufacture of general-purpose springs such as coil, torsion, and leaf. 1.2 The values stated in inch-pound units are to be regarded as the standard

Standard Specification for Carbon and Alloy Steel Bars for Springs

NF A37-611-1:2012 机械弹簧用钢丝.第1部分:铅淬火冷拉拔非合金弹簧钢丝

Steel wire for mechanical springs - Part 1 : patented cold drawn unalloyed spring steel wire.

NF A37-611-2*NF EN 10270-2:2012 机械弹簧用钢丝.第2部分:油淬火和回火弹簧钢丝

Steel wire for mechanical springs - Part 2 : oil hardened and tempered spring steel wire.

LST EN 10270-1-2012 机械弹簧用钢丝 第1部分：获得专利的冷拔非合金弹簧钢丝

Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire

LST EN 10270-2-2012 机械弹簧用钢丝 第2部分：油淬火回火弹簧钢丝

Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire

DS/EN 10270-2:2012 机械弹簧用钢丝 第2部分：油淬火回火弹簧钢丝

1.1 This European Standard applies to oil hardened and tempered spring steel wire made from unalloyed or alloyed steels. They are primarily subject to torsional stresses such as in coil springs for compression and extension and in special cases also for applications where the spring wire is subject to bending stresses such as lever springs.As a rule unalloyed steels are used for applications at room temperature whereas alloyed steels are generally used at a temperature above room temperature. Alloyed steels may also be chosen for above average tensile strengths.1.2 In addition to this European Standard, the general technical delivery requirements of EN 1002

Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire

DS/EN 10270-3:2012 机械弹簧用钢丝 第3部分：不锈钢弹簧钢丝

1.1 This European Standard applies to the grades of stainless steels listed in Table 1, which are usually used in the cold drawn condition in the form of wire of circular cross-section up to 10,00 mm in diameter, for the production of springs and spring parts that are exposed to corrosive effects and sometimes to slightly increased temperatures (see A.1).1.2 In addition to the steels listed in Table 1 certain of the steel grades covered by EN 10088-3 e.g. 1.4571, 1.4539, 1.4028 are also used for springs, although to much lesser extent. In these cases the mechanical properties (tensile strength, etc.) should be agreed between purchaser and supplier. Similarl

Steel wire for mechanical springs - Part 3: Stainless spring steel wire

DS/EN 10270-1:2012 机械弹簧用钢丝 第1部分：获得专利的冷拔非合金弹簧钢丝

1.1 This European Standard applies to patented cold drawn unalloyed steel wire of circular cross-section for the manufacture of mechanical springs for static duty and dynamic duty applications.1.2 In addition to this European Standard, the general technical delivery requirements of EN 10021 are applicable.

Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire

DIN EN 10270-3:2012 机械弹簧用钢丝.第3部分:不锈钢弹簧钢丝.德文版 EN 10270-3-2011

Steel wire for mechanical springs - Part 3: Stainless spring steel wire; German version EN 10270-3:2011

DIN EN 10270-1:2012 机械弹簧钢丝.第1部分:专利非合金冷拔弹簧钢丝.德文版 EN 10270-1-2011

Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire; German version EN 10270-1:2011

DIN EN 10270-2:2012 机械弹簧钢丝.第2部分:油淬火和回火弹簧钢丝.德文版 EN 10270-2-2011

Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire; German version EN 10270-2:2011

BS EN 10270-1:2011 金属弹簧用钢丝.获得专利的冷拉伸非合金弹簧钢丝

Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire

BS EN 10270-2:2011 机械弹簧钢丝.油硬化和回火的弹簧钢丝

Steel wire for mechanical springs. Oil hardened and tempered spring steel wire