77.140.99 其他钢铁产品 标准查询与下载

T/CISA 167-2021 DD419 单晶高温合金母合金

本文件规定了DD419单晶高温合金母合金的订货内容、尺寸、重量、技术要求、试验方法、检验规则、包装、标志、质量证明书、运输与贮存。 本文件适用于采用真空感应冶炼方法的DD419单晶高温合金母合金棒

Master alloy of DD419 single crystal superalloy

EN 13411-4:2021 钢丝绳接线端.安全性.第4部分:金属和树脂套接

This document specifies the minimum requirements for the molten metal and resin socketing of steel wire ropes within the scopes of EN 12385-4:2002+A1:2008; EN 12385-5:2021; EN 12385-6:2004; EN 12385-7:2002; EN 12385-8:2002; EN 12385-9:2002 and EN 12385-10:2003+A1:2008. The document is applicable only to those requirements that ensure that the socketing is strong enough to withstand a force of at least 100 % of the minimum breaking force of the rope (i.e. socket termination efficiency factor KT = 1,0). NOTE Rope terminations made by socketing in accordance with this document can be used for determining the breaking force of wire ropes in accordance with EN 12385-1:2002+A1:2008, Annex A. Socketing by the methods and materials described in this standard are for use within the temperature limits given in normative Annex E. This document deals with all significant hazards, hazardous situations and events relevant to metal and resin socket terminations, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).

Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing

DB13/T 5471-2021 高温合金和耐蚀合金切削料表面清洁度的检测

Detection of Surface Cleanliness of Superalloy and Corrosion Resistant Alloy Cutting Materials

ASTM F2589-16(2021) 使用钢管桩的装饰栅栏的标准规范

1.1 This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from black (that is, not galvanized) steel components. 1.2 The requirements of this specification do not apply to vertical bar fence systems utilizing solid bar or wrought iron materials. 1.3 The values stated with inch-pound units are to be regarded as standard. The SI values in parentheses are provided for information. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

T/GDC 118-2021 高伸拉篮

外观、装配质量、承重性能、耐腐蚀性、材料要求、测试件和检测要求

high stretch basket

T/GDC 115-2021 顶天立地挂架

外观、装配质量、承重性能、耐腐蚀性、材料要求、测试件和检测要求

Indomitable hanger

T/GDC 116-2021 立体拉篮

外观、装配、产品外形尺寸极限偏差、承重要求、焊接要求、镀层耐腐蚀性能、材料要求、测试件和检测要求

Three-dimensional pull basket

T/GDC 114-2021 转角连动拉篮

外观、装配、承重要求、焊接要求、镀层耐腐蚀性能、材料要求、测试件和检测要求

Corner linkage pull basket

T/GDC 117-2021 碗碟架

外观、装配质量、平稳性、跌落性能、产品外形尺寸极限偏差、承重要求、焊接要求、镀层耐腐蚀性能、材料要求、测试件和检测要求

dish rack

T/CISA 120-2021 城市道路用钢渣

本文件规定了城镇道路用钢渣的术语和定义、分类和命名、技术要求、试验方法、检验规则及贮存、运输和质量证明书。 本文件适用于陈镇道路用钢渣。其他用途可参照执行。

Steel slag for urban roads

T/CISA 116-2021 橡胶填料用钢渣粉

本文件规定了橡胶填料用钢渣粉的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于转炉渣、电炉渣经磁选、粉磨、改性后具有一定补强性能的丁苯橡胶输送带覆盖胶。

Steel slag powder for rubber fille

T/CISA 114-2021 烧结用钢渣磁选料

本文件规定了烧结用钢渣磁选料的术语和定义、技术要求、试验方法、检验规则、贮存、运输和质量证明书。 本文件适用于烧结用钢渣。

Steel slag magnetic separation material for sintering

T/HEBQIA 039-2021 铸造舱门把手

尺寸偏差小 外观优良 耐腐蚀 性能良好

Cast hatch handle

FprEN 13411-4-2021 钢丝绳的端接 安全 第4部分：金属和树脂套接

Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing

T/SSEA 0126-2021 钢铁企业烧结-高炉流程协同处置危险废物技术规范

本文件规定了烧结-高炉流程协同处置危险废物的术语和定义、工艺方法、技术要求、试验方法、健康、安全与环境管理。 本文件适用于利用烧结-高炉流程协同处置钢铁企业危险废物。

Technical specifications for the co-processing of hazardous waste in the sintering-blast furnace process of iron and steel enterprises

YB/T 4726.12-2021 含铁尘泥 氧化锰含量的测定 高碘酸钾(钠)分光光度法

Determination of manganese oxide content in iron-containing dust sludge Potassium (sodium periodate) spectrophotometry

YB/T 4957-2021 耐磨混凝土用钢渣砂

Steel slag sand for wear-resistant concrete

YB/T 4958-2021 机制砂用含钛高炉渣

Titanium-containing blast furnace slag for machine-made sand

YB/T 4959-2021 冶金矿山尾矿胶结充填技术规范

Technical specifications for cemented filling of tailings in metallurgical mines

YB/T 4726.11-2021 含铁尘泥 氧化亚铁含量测定 重铬酸钾滴定法

Determination of ferrous oxide content in iron-containing dust sludge by potassium dichromate titration method