83.040.30 塑料的辅料和添加剂 标准查询与下载

DIN 55625-10:2021 塑料增量剂 第10部分：层状天然滑石和亚氯酸盐，含碳酸盐 规范和测试方法

This document specifies requirements and corresponding methods of test for mixtures of natural talc and chlorite in lamellar form containing carbonate for the use as extender in plastics.

Extenders for plastics - Part 10: Natural talc and chlorite in lamellar form, containing carbonates - Specifications and methods of test

QB/T 1126-2021 聚烯烃填充母料

Polyolefin filler masterbatch

KS M 6555-2021 橡胶用碳酸钙

Calcium carbonate for rubber

KS M 6554-2021 橡胶用碳酸镁

Magnesium carbonate for rubber

ASTM D4889-21 聚氨酯原料的标准试验方法:粗品或改性异氰酸酯的粘度测定

1.1?These test methods (A and B) determine the viscosity of crude or modified isocyanates. They are applicable to products derived from toluene diisocyanate, methylene di(phenylisocyanate), and polymeric (methylene phenylisocyanate) (see Note 1). Note 1:?Test method A includes a

Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

ASTM C1545-02(2020) 用高强度混合器将颜料和其他材料分散到水基悬浮液中的标准实施规程

1.1 In preparing ceramic glazes and slurries for use, it is often necessary to add pigments to develop a desired fired color, to incorporate viscosity control agents for developing, or providing to develop the desired thickness of the glaze on the ware, to add materials which stabilize the suspension, control bacterial growth, and develop the desired hardness of the glaze on the ware to allow moving and handling before firing. While it is convenient to add these materials to the glaze or slurry in the dry form, it is often possible to use slurries where these materials are dispersed in a slurry and the slurry then added to the liquid glaze. Regardless of the state of the additions (dry or slurry), the dispersion can be done efficiently and effectively by the use of a high intensity mixer (sometimes referred to as a dissolver) and the procedure used is described here. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Dispersing Pigments and Other Materials Into Water-Based Suspensions With High Intensity Mixer

ASTM D4662-20 聚氨酯原料的标准试验方法:多元醇酸和碱度数的测定

1.1 These test methods measure the acidic and basic constituents in polyols and other materials of high acidity or alkalinity that are soluble in mixtures of toluene and ethyl alcohol. These test methods do not apply to polyethers. (See Note 1.) 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

ASTM D6280-98(2020) 磷酸锌颜料的标准规格

1.1 This specification covers three types of pigments commercially known as zinc phosphate each of which may or may not be available in specific grades delineated by particle size or oil absorption. 1.1.1 Type I—Zinc Phosphate, dihydrate predominant. 1.1.2 Type II—Zinc Phosphate, dihydrate tetrahydrate mixture. 1.1.3 Type III—Zinc Phosphate, tetrahydrate predominant. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Zinc Phosphate Pigments

T/ZZB 1565-2020 纺织纤维用聚对苯二甲酸乙二醇酯（PET）银系抗菌色母粒

本标准规定了纺织纤维用聚对苯二甲酸乙二醇酯（PET）银系抗菌色母粒的术语和定义、颜色类别和产品代号、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。 本标准适用于以聚对苯二甲酸乙二醇酯（PET）树脂为主要载体，添加颜料、聚对苯二甲酸丁二醇酯（PBT）树脂、纳米银抗菌剂、分散剂等助剂，经共混、研磨、挤出、拉条、切粒等工序制备的用于纤维色纺的抗菌型PET色母粒。

PET Silver antibacterial color master batch used for textile fibre

ASTM D7823-20 用热解吸法测定聚氯乙烯塑料中低含量邻苯二甲酸酯的标准试验方法&x2014；气相色谱/质谱法

1.1 This test method provides a procedure to identify and quantify phthalates by thermal desorption (TD) gas chromatography (GC) mass spectrometry (MS). Six phthalates are used to demonstrate the use of the procedure: BBP, DBP, DEHP, DNOP, DINP and DIDP. 1.2 Within the context of this method, “low level” is defined as 1000 ppm. 1.3 The values in SI units are to be regarded as standard. 1.4 This test method includes references, notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in the tables and figures) shall not be considered as requirements of this method. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—The method can be extended to include other ortho-phthalates in a number of polymeric substrates. NOTE 2—There is no known ISO equivalent to this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry

T/ZZB 1354-2019 二烷基二硫代磷酸锌类预分散母胶粒

本标准规定了二烷基二硫代磷酸锌类预分散母胶粒的分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于二烷基二硫代磷酸锌类预分散母胶粒。

Predispersed rubber chemicals zinc dialkyl dithiophosphate

DB35/T 1868-2019 塑料制品中全氟辛酸含量的测定 气相色谱法

本标准规定了塑料制品中全氟辛酸含量的气相色谱测定方法。 本标准适用于塑料制品中全氟辛酸含量的测定，方法检出限为0.005 mg/kg。

Determination of perfluorooctanoic acid content in plastic products by gas chromatography

ASTM D2383-19 潮湿条件下聚氯乙烯化合物中增塑剂相容性试验方法

1.1 This test method defines the conditions for the exposure and qualitative evaluation of plasticized poly(vinyl chloride) (PVC) compounds for plasticizer compatibility under humid conditions. Change in appearance is used for judging compatibility. 1.2 The text of this test method references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this test method. 1.3 The values stated in SI units are to be regarded as standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this test method. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

ASTM D4659-19 聚氨酯原料的标准试验方法:异氰酸酯比重的测定

1.1 These test methods determine the specific gravity of toluenediisocyanate, polymeric (methylene phenylisocyanate), and liquid methylene di(phenylisocyanate). These test methods also are applicable to many other liquids. (See Note 1.) 1.1.1 Test Method A—Specific gravity by pycnometer, for high-accuracy determination. 1.1.2 Test Method B—Specific gravity by hydrometer, for a less accurate, but rapid, determination. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

ASTM D1045-19 用于塑料的采样和测试增塑剂的标准测试方法

1.1 These test methods cover sampling and testing of liquid plasticizers used in compounding of plastics. Acid number, ester content, specific gravity, color, refractive index, and water content are determined. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards information is given in Section 5. NOTE 1—There is no known ISO equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

DB35/T 1821-2019 塑料制品中短链氯化石蜡含量的测定 气相色谱法

本标准规定了塑料制品中短链氯化石蜡含量的气相色谱测定方法。 本标准适用于塑料制品中C10～C13短链氯化石蜡含量的测定，定量限为10 mg/kg。

Determination of short-chain chlorinated paraffins in plastic products by gas chromatography

ASTM D6556-19a 炭黑的标准试验方法&8212；氮吸附的总表面积和外表面积

1.1 This test method covers the determination of the total surface area by the Brunauer, Emmett, and Teller (B.E.T. NSA) theory of multilayer gas adsorption behavior using multipoint determinations and the external surface area based on the statistical thickness surface area method. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (The minimum safety equipment should include protective gloves, sturdy eye and face protection). 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption

KS M 6551-2018 氧化锌 橡胶化合物

Zinc oxide for rubber compounds

KS M 6551-2018(2023) 橡胶化合物用氧化锌

Zinc oxide for rubber compounds

ASTM D7823-18 用热解吸法测定聚氯乙烯塑料中低含量邻苯二甲酸酯的标准试验方法&x2014；气相色谱/质谱法

Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry