91.100.50 粘合料、密封材料 标准查询与下载

GB/T 14682-1993 建筑密封材料术语

本标准规定了建筑密封材料的通用术语及其定义。 本标准适用于制订、修订建筑密封材料标准及编写、翻译有关技术文件、书刊和资料。

Building sealing material vocabulary

GB/T 12954-1991 建筑胶粘剂通用试验方法

本标准规定了建筑胶粘剂的密度、pH值、粘度、固体含量、贮存稳定性、适用期、涂胶量和粘结强度的通用试验方法。 本标准适用于建筑装饰用胶粘剂。

General testing methods for construction adhesives

GB/T 12002-1989 塑料门窗用密封条

本标准规定了塑料门窗用密封条系列公差及质量。 本标准适用于塑料门窗安装玻璃和框扇间用的改性聚氯乙烯（PVC）或橡胶弹性密封条，也适用于钢、铝合金门窗用的弹性密封条。

Sealing strips for plastic doors and windows

ASTM D8154-24 KEE-PVC 屋顶织物中酮乙烯酯和聚氯乙烯含量的 1H-NMR 测定的标准试验方法

1.1  This test method pertains to the determination of the relative contents of ketone-ethylene-ester (KEE) and polyvinyl chloride (PVC) after their extraction from reinforced roofing membranes or fabrics. Based on proton nuclear magnetic resonance spectroscopy (1H-NMR), the method allows for the quantification of PVC with respect to an internal standard. The KEE content is then obtained by difference. The test method is not applicable to membranes or blends that contain high molecular weight polymers other than PVC and KEE. 1.2  Units— The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics

ASTM C908-15(2024) 预制胶带密封剂屈服强度的标准测试方法

1.1  This test method covers a laboratory procedure for determining the yield strength of preformed tape sealants. 1.2  The values stated in acceptable metric units are to be regarded as the standard. The values given in parentheses are for information only. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 1:  There are no ISO standards similar or equivalent to this ASTM standard. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Yield Strength of Preformed Tape Sealants

ASTM C1266-17(2024) 预制胶带密封剂流动特性的标准测试方法

1.1  This test method describes a laboratory procedure for determining the flow characteristics of preformed tape sealants after a specified time, temperature, and load. 1.2  The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information purposes only. 1.3  The committee with jurisdiction of this specification is not aware of any similar specification within ISO or any other organization. 1.4  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Flow Characteristics of Preformed Tape Sealants

ASTM C961-15(2024) 密封剂搭接剪切强度的标准试验方法

1.1  This test method covers a laboratory procedure for determining the lap shear strength of sealants. It also provides information on the adhesive bond of the sealants to the tested substrates. 1.2  The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  The subcommittee with jurisdiction of this standard is not aware of any similar or equivalent ISO standard. 1.5  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Lap Shear Strength of Sealants

T/CIET 365-2024 全钒液流电池电解液行业绿色工厂评价要求

本文件规定了全钒液流电池电解液行业绿色工厂评价的评价原则、评价要求、评价方法和评价程序、评价报告。 本文件适用于全钒液流电池电解液行业绿色工厂的评价，可用于企业自我评价，第二方（相关方）或第三方组织评价。

Specification for green factory evaluation of adhesive manufacturing industry

T/CIET 368-2024 胶粘剂制造行业绿色工厂评价规范

本文件规定了胶粘剂行业绿色工厂评价的总则、评价要求、评价方法和评价程序、评价报告。 本文件适用于胶粘剂行业绿色工厂的评价，可用于企业自我评价，第二方（相关方）或第三方组织评价。

Specification for green factory evaluation of adhesive manufacturing industry

ASTM D6381/D6381M-24 测量沥青油毡机械抗拔性的标准试验方法

Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

ASTM D7693/D7693M-15(2024)e1 新混凝土桥面用热焊接改性沥青防水膜系统应用的标准指南

Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks

ASTM D7492/D7492M-16a(2024) 排水系统介质与防水系统的使用标准指南

Standard Guide for Use of Drainage System Media with Waterproofing Systems

ASTM D6390-23 测定未压实沥青混合料排水特性的标准试验方法

Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

ASTM D517-23 沥青木板标准规范

Standard Specification for Asphalt Plank

ASTM D139-23 沥青材料浮球试验的标准试验方法

Standard Test Method for Float Test for Asphalt Materials

ASTM D545-23 混凝土结构用预制膨胀缝填料的标准试验方法（非挤压型和弹性型）

Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

ASTM D140/D140M-16(2023) 沥青材料取样的标准实施规程

Standard Practice for Sampling Asphalt Materials

T/QGCML 2280-2023 EPDM窗体密封件

本文件规定了EPDM窗体密封件的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于EPDM窗体密封件的生产及检验。

EPDM window seals

T/YSX 001-2023 天然石材用环保型背网胶

1适用范围的确定 传统型背网胶（又叫云石胶）现有的国家标准是JC/T 989—2006《非结构承载用石材胶粘剂》。石材用环保型背网胶与传统的云石胶、溶剂型背网胶相比，无论是化学组成、工作原理、性能指标、检测方法、施工方法、功能作用上都差异较大，无法套用现行的标准来评价产品的质量。因此，我们对本标准的使用范围进行了限制，仅适用于饰面石材与增强背网之间的环保型背网胶产品，溶剂型背网胶、云石胶等不适用于本标准。 2检测项目的确定 本标准参照了陶瓷粘胶剂、石材防护剂、防水背胶等产品标准的检测方法，又结合环保型石材背网胶的特点：是集增强、防护、防水等功能于一体的水性背网胶，于是在检验项目方面，我们选择了外观、拉伸粘结强度、浸水后的拉伸粘结强度、热老化后的拉伸粘结强度、冻融循环后的拉伸粘结强度、晾晒时间≥20min，拉伸胶粘强度、剪切粘结强度、抗渗性、水泥粘结强度下降率、挥发性有机化合物等具有代表性的几个项目，这些项目既能满足水性石材背网胶产品性能要求，又能促进水性石材背网胶由新兴产品向成熟产品过渡。

Environmentally friendly backing glue for natural stone

T/SHHJ 000051-2023 粘结材料

本文件规定了粘结材料的术语和定义、要求、检验规则、标志、运输和贮

bonding material