93.030 外部污水排放系统 标准查询与下载

BS EN 16932-2:2018 建筑物外的排水和下水道系统. 泵送系统. 正压系统

Drain and sewer systems outside buildings. Pumping systems. Positive pressure systems

BS EN 16932-3:2018 建筑物外的排水和下水道系统. 泵送系统. 真空系统

Drain and sewer systems outside buildings. Pumping systems. Vacuum systems

DB61/T 1133-2018 美丽乡村涝池建设规范

本标准规定了美丽乡村涝池建设的术语和定义 基本要求涝池类型与要求建设原则 建设技术要求涝池管理等内容本标准适用于陕西省辖区（关中、渭北和延安南部 ）内美丽乡村涝池建设。其他涝池建设改建、扩建可参照执行

Specifications for the construction of waterlogged ponds in beautiful villages

EN 16932-3:2018 建筑物外的排水和下水道系统 泵送系统 第3部分：真空系统

Drain and sewer systems outside buildings - Pumping systems - Part 3: Vacuum systems

ISO 11296-4:2018 用于地下非压力排水和污水处理网络改造的塑料管道系统 - 第4部分:带固化管道的衬管

This document, in conjunction with ISO 11296-1, specifies requirements and test methods for cured-in- place pipes and fittings used for the renovation of underground non-pressure drainage and sewerage networks with service temperatures up to 50 °C. It applies to the use of various thermosetting resin systems, in combination with compatible fibrous carrier materials, reinforcement, and other process-related plastics components (see 5.3).

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes

EN 1852-1:2018 非压力地下排水和污水处理用塑料管道系统 聚丙烯（PP） 第1部分：管件 配件和系统规范

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes@ fittings and the system

DB11/T 1493-2017 城镇道路雨水口技术规范

Technical specifications for storm water outlets of urban roads

DB11/T 1492-2017 城镇排水管道结构等级评定

Structural Grade Evaluation of Urban Drainage Pipelines

ASTM F2510/F2510M-17 钢筋混凝土人孔结构与波纹双层和三层聚乙烯和聚丙烯管之间的弹性连接件的标准规范

Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes

ASTM F2561-17 下水道侧面修复及与主体连接的标准实施方法使用一件主要和侧面固化的衬里

Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

ASTM F1499-17 共挤复合排水 废水和通风管（DWV）的标准规范

Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

EN 16933-2:2017 建筑物外的排水和下水道系统 设计 第2部分：水力设计

Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design

ISO 13260:2010/Amd 1:2017 无压地下排水和排污用热塑性塑料管道系统.耐组合温度循环和外部荷载的试验方法.修改件1

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1

ISO 16611:2017 无压力排水和污水的塑料管道系统 - 基于不饱和聚酯树脂（UP）的玻璃增强热固性塑料（GRP）制成的非圆形管道和接头 - 尺寸 要求和试验

This document specifies the required properties of the piping system and its components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) intended to be used for drainage or sewerage without pressure including culverts. It is the responsibility of the purchaser or specifier to make the appropriate selections taking into account their particular requirements and any relevant national regulations and installation practices or codes. This document is applicable to non-circular GRP-UP pipes, with flexible or rigid joints, primarily intended for use in buried installations but may also be used to reline existing non-circular pipe lines. NOTE 1 GRP-UP includes pipes with vinyl ester liners or made entirely from vinyl ester. NOTE 2 Piping systems conforming to this document can be used also for non-buried applications provided the influence of the environment, e.g. from UV-radiation, and the supports are considered in the design of the pipes, fittings and joints. This document is applicable to pipes, fittings and their joints of nominal sizes from DN 150 to DN 4000, which are intended to be used for the conveyance of surface water or sewage at temperatures up to 50 °C.

Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Di

ASTM F3220-17 用透射式声学检验对污水管清洗操作进行优先排序的标准实施规程

1.1 This practice covers procedures for assessing the blockage within gravity-fed sewer pipes using transmissive acoustics for the purpose of prioritizing sewer pipe cleaning operations.2 The assessment is based on an acoustic receiver measuring the acoustic plane wave transmitted through the pipe segment under test in order to evaluate the blockage condition of an entire segment and to provide an onsite assessment of the blockage within the pipe segment. (1, 2, 3, 4, 5)3 1.2 The scope of this practice covers the use of the transmissive acoustic inspection as a screening tool. The blockage assessment provided by the acoustic inspection should be used to identify and prioritize pipe segments requiring further maintenance action such as cleaning or visual inspection, or both. Thereby, also identifying the pipe segments which are sufficiently clean and do not require additional maintenance action. 1.3 This standard practice does not address structural issues with the pipe wall. 1.4 The inspection process requires access to the manhole (MH) from ground level. It does not require physical access to the sewer line by either the equipment or the operator. 1.5 This standard practice applies to all types of pipe material. 1.6 The inspection process requires access to sewers and operations along roadways or other locations that are safety hazards. This standard does not describe the hazards likely to be encountered or the safety procedures that must be carried out when operating in these hazardous environments. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Prioritizing Sewer Pipe Cleaning Operations by Using Transmissive Acoustic Inspection

ASTM A964/A964M-17 波纹钢箱盖标准规格

1.1 This specification covers material, geometric, and wall section properties of steel box culverts manufactured from corrugated plate or sheet, with or without attached stiffeners, for field assembly. Appropriate fasteners and optional materials such as steel invert plates and headwalls are also described. Applications for steel box culverts include conduits for gravity flow drainage of surface water such as culverts and storm drains, as well as for small bridges and grade separation structures such as pedestrian or vehicular underpasses, and utility tunnels. 1.2 This specification does not include requirements for foundations, backfill, or the relationship between earth cover or live loads and strength requirements. These important design considerations are described in the AASHTO LRFD Bridge Design Specifications, Customary U.S. Units (LRFD Bridge Design Specifications, SI Units). 1.3 This specification does not include requirements for the hydraulic design of these structures. Hydraulic design, placement of footings or inverts, and end treatments to resist scour are described in FHWA HDS No. 5. 1.4 Appendix X1 lists nominal dimensions of box culvert sizes commonly available for Type I, II, and IV box culverts. Also listed are cross-sectional area and hydraulic design parameters for these sizes. Geometries for Type III and V box culverts are available from manufacturers. 1.5 Appendix X2 lists manufacturers’ suggested design properties for the box culvert types described in this specification, and for the spacing classes and material thicknesses typically available. 1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Standard Specification for Corrugated Steel Box Culverts

BS EN 13598-2:2016 无压力地下排水和排污用塑料管道系统.非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE).第2部分:检修孔和检查室用规范

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for manholes and inspection chambers

DB37/T 5089-2017 地下管线信息管理系统建设标准

本标准适用于地下管线分类、数据分层与要素编码、数据库建设、数据提交与检查、信息管理系统建设、系统验收与成果提交、数据库动态更新与信息管理系统维护等工作。

Underground pipeline information management system construction standard

DB37/T 5088-2017 地下管线探测技术规程

本规程适用于以获得地下管线基础信息为目的的地下管线探测工作。

Technical Regulations for Underground Pipeline Detection

ASTM C1628-17e1 使用橡胶垫圈的混凝土自流污水管接头的标准规范

Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets