C71 工业物理因素危害控制 标准查询与下载

BS PD CEN/TS 1948-5:2015 固定源排放. PCDDs/PCDFs和二氧芑类PCBs质量浓度的测定. PCDDs/PCDFs和PCBs的长期取样

Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Long-term sampling of PCDDs/PCDFs and PCBs

DIN EN 118:2014 木材防腐剂. 对散白蚁属物种(欧洲白蚁)采取预防措施的测定(实验室法); 德文版本EN 118-2013

Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method); German version EN 118:2013

DIN EN 117:2013 木材防腐剂. 散白蚁属物种(欧洲白蚁)毒性值的测定(实验室法); 德文版本EN 117-2012

This European Standard specifies a method for the determination of the toxic values of a wood preservative against the Reticulitermes species of European termites.

Wood preservatives.Determination of toxic values against Reticulitermes species (European termites) (Laboratory method); German version EN 117:2012

DIN 45645-2:2012 从测量数据中算出额定声级. 第2部分:在给定听力损伤风险等级范围内工作场所中职业活动噪音等级水平的测定

Determination of rating levels from measurement data - Part 2: Determination of the noise rating level for occupational activities at the work place for the level range underneath the given risk of hearing damage

DIN EN 50527-2-1:2012 工作轴承有源植入性医疗器械的电磁场辐射暴露评定规程.第2-1部分:与心脏起搏器一起工作的人员用具体评定.德文版本EN 50527-2-1-2011

Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-1: Specific assessment for workers with cardiac pacemakers; German version EN 50527-2-1:2011

DIN EN 12254:2012 激光工作场所用屏蔽物. 安全性要求和试验

Screens for laser working places - Safety requirements and testing; German version EN 12254:2010 + AC:2011

DIN EN 50527-1:2011 工作轴承有源植入性医疗器械的电磁场辐射暴露的评定规程.第1部分:总则;德文版本EN 50527-1-2010

Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 1: General; German version EN 50527-1:2010

DIN EN 50519:2010 工人暴露在工业感应加热设备所产生的电磁场中的评定.德文版本EN 50519-2010

Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment; German version EN 50519:2010

BS EN 12254:2010 激光工作场所用屏蔽物.试验和安全性要求

This European Standard specifies functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation. This standard includes test methods for testing functional performance and the specification of the user documentation to be supplied with the product. The screens are designed to protect the user from: ? unintentional exposure to direct and/or diffuse laser radiation; ? a time limited exposure to laser radiation, based on the functional requirements determined by risk assessment. This European Standard applies to supervised screens for installations in working places at which laser radiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectral range between 180 nm (0,18 μm) and 106 nm (1 000 μm). This European Standard applies to the protection against laser radiation only. This standard does not apply to other hazards including hazards from secondary radiation that can arise during, for example, material processing. This European Standard gives guidance on how to select such screens. Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to a laser system to form a laser product (according to EN 60825-1) are not considered to be within the scope of the standard.

Screens for laser working places - Safety requirements and testing

BS EN 50519:2010 暴露于工业感应加热设备的电场和磁场的工人评估

This European Standard specifies procedures for assessment of electric, magnetic and electromagnetic fields produced by industrial and professional induction heating equipment. Typical induction heating applications are for example: - melting; - zone-melting; - heating before hot forming; - heating by tunnel-inductor; - hardening / coaxial transformer handheld devices; - tube welding; - tube annealing; - hardening; - soldering; - hard-soldering /brazing; - bonding; - annealing; - metal-strip and wire heating; - tempering; - sintering; - shrinking. This product standard covers the frequency range up to 30 MHz taking into account the specific characteristics of industrial and professional induction heating equipment and its usage. This European Standard may also be used for assessment regarding the requirements of Directive 2004/40/EC [1] on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields), provided that no other relevant field sources are present in close proximity. If other field sources are present, additional assessment according to EN 50499:2008 is necessary. This European Standard does not cover protective measures for people with active implants.

Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment

IEEE Std C95.1a-2010 处于射频电磁场3 kHz至300 GHz的人体安全等级.修改件1:感应和触点电流指定上限,局部暴露和空间峰值功率密度间的明显差异

Ceiling values for induced and contact current requirements are specified, and distinctions between localized exposure and spatial peak power density are clarified in this amendment.

Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHZ to 300 GHz - Amendment 1: Specifies ceiling limits for induced and contact current, clarifies distinctions between localized exposure and spatial peak power dens

ANSI/ASTM E2073:2010 荧光(磷光)标记适应光亮度的试验方法

Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

ANSI/ASTM E2072:2010 荧光(磷光)安全标志用规范

Specification for Photoluminescent (Phosphorescent) Safety Markings

ASTM E1226-10 尘雾爆炸性的标准试验方法

This test method provides a procedure for performing laboratory tests to evaluate deflagration parameters of dusts. The data developed by this test method may be used for the purpose of sizing deflagration vents in conjunction with the nomographs published in NFPA 68, ISO 6184/1, or VDI 3673. The values obtained by this testing technique are specific to the sample tested and the method used and are not to be considered intrinsic material constants. For hard-to-ignite dusts with low KSt-values, a very strong ignitor may overdrive a 20-L chamber, as discussed in E1515 and Ref 2. If a dust has measurable (nonzero) Pmax- and KSt-values with a 5000 or 10 000-J ignitor but not with a 2500-J ignitor in a 20-L chamber, this may be an overdriven system. In this case, it is recommended that the dust be tested with a 10 000-J ignitor in a larger chamber such as a 1-m3 chamber to determine if it is actually explosible. 1.1 Purpose. The purpose of this test method is to provide standard test methods for characterizing the “explosibility” of dust clouds in two ways, first by determining if a dust is “explosible,” meaning a cloud of dust dispersed in air is capable of propagating a deflagration; or, if explosible, determining the degree of “explosibility,” meaning the potential explosion hazard of a dust cloud as characterized by the dust explosibility parameters, maximum explosion pressure, Pmax ; maximum rate of pressure rise, (dP/dt)max; and explosibility index, KSt. 1.2 Limitations. Results obtained by the application of the methods of this standard pertain only to certain combustion characteristics of dispersed dust clouds. No inference should be drawn from such results relating to the combustion characteristics of dusts in other forms or conditions (e.g., ignition temperature or spark ignition energy of dust clouds, ignition properties of dust layers on hot surfaces, ignition of bulk dust in heated environments, etc.) 1.3 Use. It is intended that results obtained by application of this test be used as elements of an explosion risk assessment that takes into account other pertinent risk factors; and in the specification of explosion prevention systems (see, for example NFPA 68, NFPA 69, and NFPA 654) when used in conjunction with approved or recognized design methods by those skilled in the art. Note 18212;Historically, the evaluation of the deflagration parameters of maximum pressure and maximum rate of pressure rise has been done using a 1.2-L Hartmann Apparatus. Test Method E789, which describes this method, has been withdrawn. The use of data obtained from the test method in the design of explosion protection systems is not recommended. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Explosibility of Dust Clouds

ANSI/IEEE C95.3.1:2010 人处于0-100 kHz电磁场时电场,磁场和电磁场的测量和计算的推荐实施规程

This recommended practice describes 1) methods for measuring external electric and magnetic fields and contact currents to which persons may be exposed, 2) instrument characteristics and the methods for calibrating such instruments, and 3) methods for computation and the measurement of the resulting fields and currents that are induced in bodies of humans exposed to these fields. This recommended practice is applicable over the frequency range of 0 to100 kHz.

Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 - 100 kHz

SANS 984:2009 弧闪光危害计算的IEEE标准实施导则

Provides techniques for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment.

IEEE guide for performing arc-flash hazard calculations

IEEE Std C95.1/INT 1-2009 IEEE Std C95.1 ™-2005用IEEE标准解释文件

Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz

DIN EN 50496 Berichtigung 1:2009 工作人员暴露于电磁场的测定和在广播现场的风险的评估测定,德文版本EN 50496:2008,DIN EN 50496(VDE 0848-496):2009-09的勘误表

Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site; German version EN 50496:2008, Corrigendum to DIN EN 50496 (VDE 0848-496):2009-09

DIN EN 50499:2009 对工作人员暴露于电磁场的评定程序,德文版本EN 50499:2008

Procedure for the assessment of the exposure of workers to electromagnetic fields; German version EN 50499:2008

EN 13544-1:2007+A1:2009 呼吸治疗设备.第1部分:雾化系统及其部件

The scope given in Clause 1 of EN 60601-1:1990 applies except that 1.1 is replaced by the following: 1.1 This European Standard specifies requirements for nebulizing systems used for the delivery of drugs in an aerosol form to humans through the respiratory system. This European Standard includes gas-powered nebulizers which may be derived from e. g. compressors, pipeline systems, cylinders etc., or electrically-powered nebulizers (e. g. ultrasonic and membrane devices) or manually-powered nebulizers. NOTE Requirements for nebulizers having also a humidification function are specified in EN ISO 8185:1997 + AC:2002 "Humidifiers" (see 56.102). This European Standard does not apply to nebulizers precharged with a specific medicinal product (e. g. MDI, DPI).

Respiratory therapy equipment - Part 1: Nebulizing systems and their components