C81 火警监视、报警与消防调度系统 标准查询与下载
共找到 472 条与 火警监视、报警与消防调度系统 相关的标准，共 32 页
This European Standard specifies requirements, test methods and performance criteria for point-type multi-sensor fire detectors for use in fire detection systems installed in buildings (see EN 54-1:2011), incorporating in one mechanical enclosure at least one optical or ionization smoke sensor and at least one heat sensor. The overall fire detection performance is determined utilizing the combination of the detected phenomena. This European Standard provides for the assessment and verification of constancy of performance (AVCP) of point detectors using a combination of smoke and heat sensors to this European Standard. Point detectors using a combination of smoke and heat sensors having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this European Standard (e. g. additional features or enhanced functionality for which this European Standard does not define a test or assessment method). NOTE Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not specified in this European Standard.
Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2015-04
- 实施
This European Standard specifies requirements, test methods and performance criteria for point-type multi-sensor fire detectors for use in fire detection systems installed in and around buildings (see EN 54-1:2011), incorporating in one mechanical enclosure at least one carbon monoxide sensor and at least one heat sensor and where the overall fire detection performance is determined utilizing the combination of the detected phenomena. This European Standard provides for the assessment and verification of consistency of performance (AVCP) of multi-sensor fire detectors using a combination of carbon monoxide and heat sensors to this EN. Multi-sensor fire detectors using carbon monoxide and heat sensors having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this standard (e. g. additional features or enhanced functionality for which this European Standard does not define a test or assessment method).
Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2015-04
- 实施
This European Standard specifies requirements, test methods and performance criteria for point detectors using carbon monoxide sensing for use in fire detection and fire alarm systems in and around buildings (see EN 54-1:2011). This European Standard provides for the assessment and verification of consistency of performance (AVCP) of carbon monoxide point detectors to this EN. This European Standard does not apply to fire detectors incorporating at least one CO sensing element in combination with other elements sensing different fire phenomena. CO detectors having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this European Standard (e. g. additional features or enhanced functionality for which this standard does not define a test or assessment method).
Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2015-04
- 实施
Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique
- ICS
- 13.220.01
- CCS
- C81
- 发布
- 2015-03-31
- 实施
- 2015-03-31
This European Standard specifies requirements, test methods and performance criteria for fire detectors which detect smoke in air ducts in buildings as a part of a fire detection and fire alarm system or as an actuator for a fire protection system. Duct smoke detectors with special characteristics and developed for specific risks are not covered by this document. NOTE Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from one member state to another and are not specified in this standard.
Fire detection and fire alarms systems - Part 27: Duct smoke detectors
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2015-03
- 实施
This part of BS 5446 specifies requirements and test methods for components and their means of interconnection (e.g. by electrical wiring or by radio links) intended to be assembled to create fire and/or carbon monoxide alarm systems for deaf and hard of hearing people,for the purpose of life safety in dwellings. NOTE 1 Although this part of BS 5446 provides the specification for alarm systems for dwellings,it is recognized that these systems,or components thereof,might be used in other situations,where similar requirements could be anticipated. NOTE 2 Equipment conforming to this part of BS 5446 might not be suitable for use in boats,due to the corrosive atmosphere. It might however be suitable for use in other leisure accommodation vehicles (LAVs). NOTE 3 The systems specified in this part of BS 5446 are specifically intended to give warning in the event of fire,or carbon monoxide emissions. However,it is recognized that systems might also incorporate devices to alert deaf and hard of hearing people to other events,such as door bell,telephone,alarm clock,baby alarm, etc.,that are outside the scope of this part of BS 5446. This part of BS 5446 does not cover medical vibrating devices as defined in BS EN ISO 9999; these are covered by BS EN 12182.
Detection and alarm devices for dwellings. Specification for fire alarm and carbon monoxide alarm systems for deaf and hard of hearing people
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2015-02-28
- 实施
- 2015-02-28
UL Standard for Control Units and Accessories for Fire Alarm Systems - Section / Paragraph Reference: See Individual Decisions Subject: Revision to Permit Electronic Media for Installation Wiring Diagram (Edition 9: September 30@ 2003)
- ICS
- CCS
- C81
- 发布
- 2015-02-17
- 实施
Fire detection and alarm systems. Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2015-01-31
- 实施
- 2015-01-31
Fire detection and fire alarm system. Multi-sensor fire detectors. Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2014-12-31
- 实施
- 2014-12-31
UL Standard for Safety Control Units and Accessories for Fire Alarm Systems (Tenth Edition)
- ICS
- CCS
- C81
- 发布
- 2014-12-01
- 实施
This European Standard specifies requirements, test methods and performance criteria for point-type multisensor fire detectors for use in fire detection and fire alarm systems installed in and around buildings (see EN 54-1:2011), incorporating in one mechanical enclosure at least one optical or ionization smoke sensor and at least one carbon monoxide (CO) sensor and optionally one or more heat sensors, utilizing the combination of the detected phenomena. This European Standard covers only modes of operation, where at least the signals of both smoke and carbon monoxide sensors are continuously evaluated. This European Standard provides for the assessment and verification of constancy of performance (AVCP) of point detectors using a combination of smoke, carbon monoxide and optionally heat sensors to this EN. Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors, which are having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this standard (e. g. additional features or enhanced functionality for which this European Standard does not define a test or assessment method).
Fire detection and fire alarm system - Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2014-12
- 实施
Fire detection and fire alarm systems - Design and operation; Supplement 1: Application Note
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2014-12
- 实施
Fire detection and alarm systems - Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2014-12
- 实施
Fire detection and fire alarm systems. Fire alarm devices. Sounders
- ICS
- 13.220.20;13.320
- CCS
- C81
- 发布
- 2014-10-31
- 实施
- 2014-10-31
Alarm systems for fire, intrusion and hold-up - Part 1: General requirements
- ICS
- 13.220.20;13.320
- CCS
- C81
- 发布
- 2014-10-01
- 实施
Firefighting equipment - Standardized CAN interface for components in emergency vehicles - Part 9: Winch handle
- ICS
- 13.220.10;43.040.15
- CCS
- C81
- 发布
- 2014-10
- 实施
Firefighting equipment - Standardized CAN interface for components in emergency vehicles - Part 6: Portable pump
- ICS
- 13.220.10;43.040.15
- CCS
- C81
- 发布
- 2014-10
- 实施
Firefighting equipment - Standardized CAN interface for components in emergency vehicles - Part 8: Frequency converter
- ICS
- 13.220.10;43.040.15
- CCS
- C81
- 发布
- 2014-10
- 实施
Firefighting equipment - Standardized CAN interface for components in emergency vehicles - Part 7: Generator
- ICS
- 13.220.10;43.040.15
- CCS
- C81
- 发布
- 2014-10
- 实施
Fire detection and alarm systems. Fire protection control equipment
- ICS
- 13.220.20
- CCS
- C81
- 发布
- 2014-09-30
- 实施
- 2014-09-30
