E20 石油、天然气综合 标准查询与下载

EN ISO/TS 27469:2011 石油,石化和天然气工业.测试防火阀之方法

Petroleum, petrochemical and natural gas industries - Method of test for fire dampers

EN ISO/TS 29001:2011 石油,石化和天然气工业.特定行业质量管理体系.对产品和服务供应组织的要求

Petroleum@ petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations

EN ISO/TR 13881:2011 石油和天然气工业;产品,工艺和服务的分类和合格评定

Petroleum and natural gas industries - Classification and conformity assessment of products@ processes and services

EN ISO/TS 24817:2011 石油,石化和天然气工业复合材料修理管道的资格,设计,安装,测试和检验

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection

EN ISO/TR 10400:2011 石油和天然气工业.公式和计算使用套管和油管套管,油管,钻杆和管线管的特性

Petroleum and natural gas industries - Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing

ASTM D4006-11(2012) 蒸馏法测定原油中水的标准试验方法

1.1 This test method covers the determination of water in crude oil by distillation. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1 and A1.1.

Standard Test Method for Water in Crude Oil by Distillation

ASTM D4006-11(2012)e1 蒸馏法测定原油中水的标准试验方法

4.1 A knowledge of the water content of crude oil is important in the refining, purchase, sale, or transfer of crude oils. 4.2 This test method may not be suitable for crude oils that contain alcohols that are soluble in water. In cases where the impact on the results may be significant, the user is advised to consider using another test method, such as Test Method D4928 (API MPMS Chapter 10.9). 1.1 This test method covers the determination of water in crude oil by distillation. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1 and A1.1.

Standard Test Method for Water in Crude Oil by Distillation

ASTM D4007-11 离心法测定原油中水和沉积物的标准试验方法

The water and sediment content of crude oil is significant because it can cause corrosion of equipment and problems in processing. A determination of water and sediment content is required to measure accurately net volumes of actual oil in sales, taxation, exchanges, and custody transfers. It is not anticipated that this test method, which is written with a dedicated laboratory facility in mind, is likely to be used in field test rooms or sample rooms due to safety concerns for proper ventilation nbsp;nbsp;nbsp;and handling. This test method may not be suitable for crude oils that contain alcohols that are soluble in water. In cases where the impact on the results may be significant, the user is advised to consider using another test method, such as Test Method D4928 (API MPMS Chapter 10.9).1.1 This test method describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure. This centrifuge method for determining water and sediment in crude oils is not entirely satisfactory. The amount of water detected is almost always lower than the actual water content. When a highly accurate value is required, the revised procedures for water by distillation, Test Method D4006 (API MPMS Chapter 10.2) (Note 1), and sediment by extraction, Test Method D473 (API MPMS Chapter 10.1), shall be used. Note 18212;Test Method D4006 (API MPMS Chapter 10.2) has been determined to be the preferred and most accurate method for the determination of water. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements appear in 6.1, 8.3, and A1.5.4.

Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

EN ISO 13628-4:2010 石油和天然气工业.设计和海底生产系统的操作.第4部分:井口和采油树设备（ISO13628-4:2010）

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (Incorporating corrigendum June 2011)

DIN EN ISO 20815:2010 石油、石化和天然气工业.生产保证和可靠性管理(ISO 20815-2008,修订版本2009-06-15).英文版本EN ISO 20815-2010

Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15); English version EN ISO 20815:2010

NF M87-281:2010 石油,石化和天然气工业.生产保证和可靠性管理

Petroleum, petrochemical and natural gas industries - Production assurance and reliability management.

EN ISO 15136-1:2009 石油和天然气工业.螺杆泵系统人工举升.第1部分:泵（ISO15136-1:2009）

Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)

KS B ISO 15547:2009 石油和天然气工业.板式热交换器

이 표준은 석유 및 천연 가스 산업에 사용되는 판형 열교환기(판틀형 열교환기)의 기계적 설

Petroleum and natural gas industries-Plate heat exchangers

JIS K 2258-2:2009 原油和石油产品.蒸汽压的测定.第2部分:三倍膨胀方法

This Standard specifies the measuring method of absolute vapoure PRESSURE OF 7 KPa to 150 kPa at 37.8℃ of volatile and non-viscous petroleum products in accordance with the triple expansion method.

Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 2: Triple expansion method

JIS K 2270-2:2009 原油和石油产品.碳渣的测定.第2部分:显微法

This Standard specifies a method for determining the amount of carbon residue, in the reange of 0.01% to 30.0% mass fraction, the after evaporation and pyrolysis of crude petroleum and petroleum products, according to the micro method .

Crude petroleum and petroleum products -- Determination of carbon residue -- Part 2: Micro method

JIS K 2270-1:2009 原油和石油产品.碳渣的测定 第1部分:康拉德逊法

This Standard specifies a method for determining the amount of carbon residue, in the range of 0.01% to 30.0% mass fraction, left afer evaporation and pyrolysis of crude petroleum and petroleum products, according to Conradson method.

Crude petroleum and petroleum products -- Determination of carbon residue -- Part 1: Conradson method

JIS K 2258-1:2009 原油和石油产品.蒸汽压的测定.第1部分:里德法

This Standard specifies the measuring method of absolute vapoure at 37.8℃ of volatile and non-viscous petroleum products in accordance with the Reid method.

Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 1: Reid method

SN/T 2270-2009 汽轮机燃料中钙、铅、钠、钒的测定.原子吸收光谱法

本标准规定了汽轮机燃料中钙、铅、钠和钒原子吸收光谱法测定的方法。 本标准适用于汽轮机燃料中钙、铅、钠和钒的原子吸收光谱测定法。测定范围为0.1mg/L～2.0mg/L。 本标准适用于油溶性金属及油水混合物中非水源性污染物中钙、铅、钠和钒原子吸收光谱法的测定。

Determination of calcium、lead、sodium、vanadium in gas turbine fuels.Atomic absorption spectrometry

KS M ISO 4256:2008 液化石油气.蒸汽压力的测定.液化石油气法

이 표준은 약 35~70 ℃의 범위에서 액화 석유 가스(3. 참조)의 게이지 증기압을 측정

Liquefied petroleum gases－Determination of gauge vapour pressure－LPG method

DIN EN ISO 20815:2008 石油、石化和天然气工业.生产保证和可靠性管理

This International Standard introduces the concept of production assurance within the systems and operations associated with exploration drilling，exploitation，processing and transport of petroleum，petrochemical and natural gas resources．This International Standard covers upstream(including subsea)，midstream and downstream facilities and activities．It focuses on production assurance of oil and gas production，processing and associated activities and covers the analysis of reliability and maintenance of the components It provides processes and activities，requirements and guidelines for systematic management，effective planning，execution and use of production assurance and reliability technology．This is to achieve cost— effective solutions over the life cycle of an asset—development project structured around the following main elements： ——production—assurance management for optimum economy of the facility through all of its life‘cycle phases， while also considering constraints arising from health，safety，environment，quality and human factors； ——planning，execution and implementation of reliability technology； 。．．．——application of reliability and maintenance data； ，．．——reliability-based design and operation improvement． For standards on equipment reliability and maintenance performance in general，see the IEC 60300—3 series． This International Standard designates 1 2 processes，of which seven are defined as core production。 assurance processes and addressed in this International Standard．The remaining five processes are denoted as interacting processes and are outside the scope of this International Standard．The interaction of the core productiOn．assurance processes with these interacting processes，however， is within the scope of this International Standard as the information flow to and from these latter processes is required to ensure that production．assurance requirements can be fulfilled． This International Standard recommends that the listed processes and activities be initiated only if they can be considered to add value． The 0nIv requirements mandated by this International Standard are the establishment and execution of the production—assurance programme(PAP)．

Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008); English version EN ISO 20815:2008