共找到 1685 条与 基础标准与通用方法 相关的标准,共 113 页
Design code for wast gas collection and treatment in rubber factory
Technical Specifications for Remediation of Chemically Contaminated Soil by Microbial Methods
Determination of Nitrogen and Phosphorus in Plants by Continuous Flow Analysis
Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
This International Standard describes the quantitative liquid chromatographic determination of specific sugars (galactose, glucose, fructose, sucrose, lactose, and maltose) in various milk and milk products, applying arabinose or fucose as internal standards. The method is applic
Milk and milk products - Determination of the sugar contents - High performance anion exchange chromatography with pulsed amperometric detection method (HPAEC-PAD) (ISO 22184:2021); German version EN ISO 22184:2021
This document specifies the minimum amount of information spectroscopy to be reported with the analytical results to describe the methods of charge control and charge correction in measurements of core-level binding energies for insulating specimens by X-ray photoelectron. It also provides methods for charge control and for charge correction in the measurement of binding energies.
Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
This document specifies a method of determining relative sensitivity factors (RSFs) for secondary-ion mass spectrometry (SIMS) from ion-implanted reference materials. The method is applicable to specimens in which the matrix is of uniform chemical composition, and in which the peak concentration of the implanted species does not exceed one atomic percent.
Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
Determination of the amount of chlorine dioxide gas generated by sanitization products -- Small chamber method
The marking for presence of the specific chemical substances for electrical and electronic equipment
This document provides guidelines that are applicable to bulk and depth profiling GD-OES analyses. The guidelines discussed herein are limited to the analysis of rigid solids, and do not cover the analysis of powders, gases or solutions. Combined with specific standard methods which are available now and, in the future, these guidelines are intended to enable the regulation of instruments and the control of measuring conditions. Although several types of glow discharge optical emission sources have been developed over the years, the Grimm type with a hollow anode accounts for a very large majority of glow discharge optical emission devices currently in use both for dc and rf sources. However, the cathode contact is often located at the back of the sample, in e.g. the Marcus type source, rather than at the front as in the original Grimm design. The guidelines contained herein are equally applicable to both and other source designs and the Grimm type source is used only as an example.
Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
This part of ISO/TS 80004 lists terms and definitions related to carbon nano-objects in the field of nanotechnologies. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.
Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2020); German version CEN ISO/TS 80004-3:2020
Le présent amendement modifie l'Annexe E et l'Annexe G, de la norme homologuée NF EN ISO 6142-1, de novembre 2015.
Gas analysis - Preparation of calibration gas mixtures - Part 1 : gravimetric method for Class I mixtures - AMENDMENT 1 : Corrections to formulae in Annex E and Annex G
This document specifies the routine method for the determination of the moisture content of butter. This includes to heat a known mass of butter under controlled conditions in an open beaker to evaporate the volatile constituents. The loss of mass is determined.
Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 1: Determination of moisture content (ISO 8851-1:2004)
Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
This document provides a rapid set of tests for assessing several key parameters of an X-ray photoelectron spectrometer. The document is intended for use with a monochromated Al KAlpha source or with an unmonochromated Al or Mg KAlpha X-ray source.
Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
1.总则2.术语3.现场安全管理的组织4.现场安全管理策划5.现场安全综合管理6.施工过程安全管理7.试车安全管理8.现场安全应急管理9.事故/事件管理10.现场安全管理绩效评价
The Standard of Safety Management at Construction Site for Petrochemical Project
Safety test methods for import and export of hazardous chemicals Part 3: Daphnia magna reproduction test
Determination of the content of nitrocellulose wetting agent for import and export of hazardous chemicals
Classification method of hazardous properties of dibenzoyl peroxide for import and export of hazardous chemicals
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号