G34 合成橡胶基础标准与通用方法 标准查询与下载
共找到 1828 条与 合成橡胶基础标准与通用方法 相关的标准，共 122 页
This document specifies a method for determining the plasticity retention index (PRI) of raw natural rubber. The PRI is a measure of the resistance of raw natural rubber to thermal oxidation. A high resistance to thermal oxidation is shown as a high value of the index. PRI is not an absolute value and cannot give an absolute classification of plasticity number of different natural rubber after oxidation.
Rubber, raw natural - Determination of plasticity retention index (PRI)
- ICS
- 83.040.10
- CCS
- G34
- 发布
- 2017-08-00
- 实施
Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
- ICS
- 83.040.10
- CCS
- G34
- 发布
- 2017-07-28
- 实施
- 2017-07-31
Rubber compounding ingredients. Abbreviated terms
- ICS
- 01.040.83;83.040.20
- CCS
- G34
- 发布
- 2017-07-27
- 实施
- 2017-07-31
Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining the ozone concentration in laboratory test chambers
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-07-20
- 实施
- 2017-07-31
Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-07-07
- 实施
- 2017-07-07
Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
- ICS
- 59.080.40;83.060
- CCS
- G34
- 发布
- 2017-07-07
- 实施
- 2017-07-07
Determination of vanadium in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymer (EPDM) spectrophotometrically
- ICS
- 83.040.10
- CCS
- G34
- 发布
- 2017-07-07
- 实施
- 2018-01-01
Rubber. Determination of adhesion to rigid materials using conical shaped parts
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-06-28
- 实施
- 2017-06-28
Rubber, vulcanized or thermoplastic. Determination of rebound resilience
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-06-22
- 实施
- 2017-06-22
This document specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber. The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy coatings or chemical treatments of rigid parts and either a single cement or both primer and cover cements. The bonding system for preparing the test pieces should be adequately specified by the user, but provision is made in this document for the evaluation of different types of failure related to a complex bonding system. The method is designed primarily for test pieces prepared in the laboratory under standard conditions in order to provide data for development and control of bonding systems and their components, such as cements or special rubber compounds, and of methods of manufacture. While intended to be applied where the rubber is bonded to rigid supporting pieces, it might not cover such cases where the support, although of high-modulus material, has a low rigidity due to small transverse dimensions, as in the case of rubber bonded to metal wires, cords or thin sheets.
Rubber - Determination of adhesion to rigid materials using conical shaped parts
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-06
- 实施
This document specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 × 108 Ω and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material. NOTE Highly conductive mixes cannot be made in this way. This document specifies the electrode configuration for basic geometries, but it is intended that reference be made to relevant product specifications for requirements for specific products. It does not apply to: a) products the relevant surfaces of which are composed of mixtures of insulating and conductive areas; b) products with a substantial surface area of insulating material, except for footwear (which does not normally have a conductive or antistatic upper).
Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-06
- 实施
This document specifies a method for the sampling of raw rubber in bales, blocks or packages and further procedures carried out on the samples to prepare test samples for chemical and physical tests.
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
- ICS
- 83.040.10
- CCS
- G34
- 发布
- 2017-06
- 实施
This document establishes unambiguous abbreviated terms for commonly used rubber compounding ingredients of known, specific chemical composition.
Rubber compounding ingredients - Abbreviated terms
- ICS
- 01.040.83;83.040.20
- CCS
- G34
- 发布
- 2017-06
- 实施
Rubber, vulcanized or thermoplastic - Determination of rebound resilience
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-06
- 实施
Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
- ICS
- 59.080.40;83.060
- CCS
- G34
- 发布
- 2017-05
- 实施
Rubber. Determination of magnesium content of field natural rubber latex by titration
- ICS
- 83.040.10
- CCS
- G34
- 发布
- 2017-04-30
- 实施
- 2017-04-30
Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 1: 1H-NMR and IR with cast-film method
- ICS
- 83.040.20;83.060
- CCS
- G34
- 发布
- 2017-04-20
- 实施
Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method
- ICS
- 83.040.20;83.060
- CCS
- G34
- 发布
- 2017-04-20
- 实施
Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- ICS
- 83.060
- CCS
- G34
- 发布
- 2017-04-20
- 实施
