G35 合成橡胶 标准查询与下载

JIS K 6220-1:2015 橡胶配合剂.有机化学品.试验方法.第1部分:总则

Rubber compounding ingredients -- Organic chemicals -- Test methods -- Part 1: General

ISO 19050:2015 硫化生橡胶. 采用感应耦合等离子体发射光谱法测定金属含量

Rubber, raw, vulcanised - Determination of metal content by ICP-OES

ISO 8312:2015 橡胶配合剂.硬脂酸.定义和试验方法

This International Standard defines stearic acid (including blends of stearic and palmitic acid) for use as a compounding ingredient in the rubber industry and specifies the test methods for describing its properties. Classification of stearic acid and stearic acid/palmitic acid blends according to iodine value and typical chemical and physical properties for such materials for use in the rubber industry are given in Annex L. Annex L is given for information only. In this International Standard, the atomic absorption spectrometric method is the preferred method.

Rubber compounding ingredients - Stearic acid - Definition and test methods

ISO 1658:2015 天然橡胶(NR).评估规程

Natural rubber (NR) - Evaluation procedure

SH/T 1718-2015 充油橡胶中油含量的测定

本标准规定了测定充油橡胶中油含量的方法。 本标准适用于充油苯乙烯-丁二烯橡胶(SBR)、充油丁二烯橡胶(BR)、充油苯乙烯-丁二烯嵌段共聚物(SBS)和充油乙烯-丙烯-二烯烃共聚物(EPDM)。

Oil-extended synthetic rubber.Determination of oil content

SH/T 1157.2-2015 生橡胶 丙烯腈-丁二烯橡胶(NBR)中结合丙烯腈含量的测定 第2部分:凯氏定氮法

SH/T 1157的本部分规定了采用凯氏定氮法测定丙烯腈-丁二烯橡胶(NBR)中结合丙烯腈含量的两种方法：方法A和方法B。 本部分适用于测定NBR生橡胶，其他NBR也可参照使用。 这两种方法可能会得到不同的测定结果，在有争议的情况下，宜使用方法A。

Rubber, raw.Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR).Part 2:Kjeldahl method

SH/T 1780-2015 异戊二烯橡胶(IR)

本标准规定了异戊二烯橡胶（简称“异戊橡胶”）的产品分类、技术要求、试验方法、检验规则及包装、标志、贮存、运输。 本标准适用于在稀土催化体系下经溶液聚合制得的异戊橡胶。

Isoprene rubber (IR)

ISO 2028:2015 合成胶乳.干聚合物的制备

This International Standard specifies four methods for the isolation of dry polymer from synthetic polymer latices containing anionic surfactants, for the purpose of subsequent testing. Tests to be performed include the determination of the Mooney viscosity, the bound-styrene or acrylonitrile content in the polymer chain or the mill shrinkage. Because of the wide variety of surfactants and stabilizers used in the manufacture of synthetic rubber latices, there is not one method suitable for all latices. The methods given in this International Standard are suitable for a wide variety of latices, but their applicability is to be confirmed for individual types. Latices containing non-ionic stabilizers, in particular, may be resistant to coagulation. These methods are not necessarily suitable, without modification, for latices containing polymers having high tack. The dry polymer as isolated may contain residual organic acids or their aluminium salts which may affect the properties of the polymer and which are to be taken into account when performing analytical tests.

Synthetic rubber latex - Preparation of dry polymer

PNST 68-2015 多功能的含氟组合物. 规格

Multifunction fluorinated composition. Specifications

HG/T 4787-2014 中分子量聚异丁烯

本标准规定了中分子量聚异丁烯的要求，试验方法，检验规则以及标志、包装、运输和贮存。 本标准适用于采用路易斯(Lewis)酸催化聚合工艺生产的黏均分子量为20 000～100 000的中分子量聚异丁烯，黏均分子量以下简称“分子量”。该产品主要用于制造各种密封胶、热熔胶等工业黏合剂，还可用作绝缘材料、防水材料及油品添加剂等。

Middle molecular polyisobutylene

HG/T 3317-2014 氯丁二烯胶乳CRL 50LK

本标准规定了氯丁二烯胶乳CRL 50LK的要求，试验方法，检验规则以及标志、包装、运输和贮存。 本标准适用于以氯丁二烯为单体、阳性皂为乳化剂，经乳液聚合制得的阳离子氯丁二烯胶乳。该胶乳为高度凝胶型聚合物，中等结晶，具有氯丁二烯橡胶通性。

Chloroprene rubber latex CRL 50LK

HG/T 3316-2014 氯丁二烯橡胶CR 244

本标准规定了氯丁二烯橡胶CR 244的要求，试验方法，检验规则以及标志、包装、运输和贮存。 本标准适用于以氯丁二烯为单体、松香皂为乳化剂，经低温乳液聚合制得的非硫调、非污染的氯丁二烯橡胶。

Chloroprene rubber CR 244

BS ISO 4097:2014 乙烯-丙烯-二烯橡胶(EPDM).评定规程

Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure

NF T43-006*NF ISO 2393:2014 橡胶试验混合料.制备、混合和硫化.设备和规程

La présente Norme internationale spécifie l'appareillage et les modes opératoires pour la préparation, le mélangeage, et la vulcanisation des mélanges d'essais à base de caoutchouc spécifiés dans les différentes Normes internationales relatives à l'évaluation de ces mélanges d'essais.

Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures

NF T42-003*NF ISO 124:2014 乳胶橡胶.总固体含量的测定

La présente Norme internationale spécifie des méthodes pour la détermination des matières solides totales dans le latex de plantation, le latex de concentré de caoutchouc naturel et le latex de caoutchouc synthétique. Ces méthodes ne conviennent pas nécessairement au latex d'origine naturelle autre que celui de l'Hevea brasiliensis, au latex vulcanisé, aux mélanges de latex, ou aux dispersions artificielles de caoutchouc.

Latex, rubber - Determination of total solids content

ISO 3302-1:2014 橡胶 产品公差 第1部分:尺寸公差

This partofISO 3302 specifies classes ofdimensional tolerances andtheir values for moulded, extruded， and calendared solid rubber products. The relevant test methods necessary for the establishment of compliance with this part of ISO 3302 are also Specified. The tolerances are primarily intended for use with vulcanized rupber but can also be Suitable for products made ofthermoplastic rubbers. This part of ISO 3302 does not apply to precision toroidal sealing rings or to calendared composite products such as rubber-coated fabrics or products where arubber coating is applied by the process of topping or skim coating.

Rubber - Tolerances for products - Part 1: Dimensional tolerances

ISO 3385:2014 软质泡沫聚合材料 用恒定载荷冲击法测定疲劳性能

This International Standard specifies a method for the determination of loss in thickness and loss in hardness of flexible cellular materials intended for use in load-bearing applications such as upholstery. It provides a means of assessing the service performance of flexible cellular materials based on rubber latex or polyurethane used in load-bearing upholstery. The method is applicable both to standard size test pieces cut from slabstock material and to shaped components. The measured loss in thickness and loss in hardness are related to, but are not necessarily the same as, the losses likely to occur in service. This international Standard is not intended to function as a detailed engineering design specification for fatigue apparatus.

Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding

ISO 13179-1:2014 外科植入物. 金属外科植入物的等离子喷涂非合金钛涂层. 第1部分: 一般要求

Implants for surgery - Plasma-sprayed unalloyed titanium coatings on metallic surgical implants - Part 1: General requirements

SAE AMS3338G-2014 耐超低温的硅酮橡胶.75-85

This specification covers a silicone (PVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. Primarily for parts required to operate or seal from -85 to +230 degrees C (-121 to +446 degrees F), compounded especially for operation at extreme low temperatures. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with low-aniline-point petroleum-base fluids, including fuels, due to excessive swelling.

Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 75 - 85

SAE AMS3356F-2014 电气级耐润滑油和耐压缩永久变形的硅酮橡胶.55-65

This specification covers a silicone (VMQ) rubber in the form of sheet, strip, tubing, extrusions and molded shapes. Primarily for parts required to operate or seal from -55 to +230 degrees C (-67 to +446 degrees F), compounded especially for aircraft piston engine oil resistance, low compression set, and controlled dielectric strength. Silicone elastomer is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. The elastomer is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of

Silicone (VMQ) Rubber, Lubricating Oil and Compression Set Resistant, Electrical Grade, 55-65