共找到 548 条与 金属物理性能试验方法 相关的标准,共 37 页
本标准适用于位错密度0~100.000cm的N型和P型锗单晶棒或片的位错密度或其他缺陷的测量。观察面为(111)、(100)和(113)面。
Germanium monocrystal--Inspection of dislocation etch pit density
本标准适用于测量金属材料多晶粉末中的物相含量。也可供其他材料的多晶粉末试样定量相分析参照使用。
Metal materials--Quantitative phase analysis--"value K" method of x-ray diffraction
Test method for thermoelectric power of precision resistance alloys
本标准适用于测定精密电阻合金的电阻温度系数,其温度范围为-60~150℃,也适用于其他合金的电阻温度系数测量。
Test method for temperature-resistance coefficient of precision resistance alloys
本标准适用于精密电阻合金在-60~250℃范围内对铜热电动势率的测量,凡在此范围内,本标准也适用于其他金属材料对铜热电动势率测量。
Test method for thermoelectric power of precision resistance alloys
本标准适用于测量实心并具有均匀截面的精密电阻合金的体积电阻率和单位长度电阻。
Test method for resistivity of precision resistance alloys
本标准规定了烧结金属材料和硬质合金电阻率的测定方法。其中包括两种测量过程。一个测量精度在0.30%以内,适用于材料基本特性的精确测定;一个测量精度较低,适用于工业生产的质量控制。
Sintered metal materials and hardmetals--Determination of electrical resistivity
本标准规定了可渗性烧结金属材料含油率的测定方法。 本标准特别适用于烧结金属多孔轴承,以及用金属粉末通过成型和烧结而制成的机械零件。
Permeable sintered metal materials--Determination of oil content
本标准规定了可渗性烧结金属材料开孔率的测定方法。 本标准特别适用于烧结金属多孔轴承,以及用金属粉末通过成型和烧结而制成的机械零件。
Permeable sintered metal materials--Determination of open porosity
本标准规定了可渗性烧结金属材料-密度的测定方法。 本标准特别适用于烧结金属多孔轴承以及用金属粉末通过成型和烧结而制成的机械零件。
Permeable sintered metal materials--Determination of density
本标准采用伏-安法在室温(10~35℃)下测量由软磁合金(铁-镍)带材制备的环形试样的振幅磁导率μa。测量频率为60Hz至10kHz。
The measurement method of amplitude permeability of soft magnetic alloys
Extrinsic semiconductor single crystals-measurement of Hall mobility and Hall coefficient
本标准适用于在非本征半导体单晶试样中确定载流子霍尔迁移率。为获得霍尔迁移率必须测量电阻率和霍尔系数,因此本标准也分别适用于这些参数的测量。
Extrinsic semiconductor single crystals--Measurement of Hall mobility and Hall coefficient
本方法适合于测量小于1000g的整根钨钼条的密度。
Method for testing the density of tungsten and molybdenum bars
本标准适用于钨钼等粉末的平均粒度及粒度分布的测定。本标准方法最适宜的测量范围为1~40Um。
Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles
本方法适用于直径为φ20~300um的电真空器件及电光源用细钨丝、钼丝和薄带的密度测定。
Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuum tubes
本标准适用于电真空器件、电光源用钨钼及其合金的棒、丝、板、片、箔带材的电阻率的测定。
Method for the determination of the resistivity of tungsten and molybdenum used in electric light sources and vacuum tubes
本标准这一部分规定了用标准漏斗法测定金属粉末松装密度的方法。本方法仅适用于能自由流过孔径为2.5mm或5.0mm标准漏斗的粉末。本标准的其他部分规定了不能通过孔径为5.0mm标准漏斗的粉末松装密度测定方法。
Metallic powders--Determination of apparent density--Part 1:Funnel method
本标准适用于用标准漏斗法测定金属粉末的流动性。凡能自由流过孔径为2.5mm标准漏斗的粉末,均可采用本标准。
Metallic powders--Determination of flowability by means of a calibrated funnel(Hall flowmeter)
本标准规定用斯科特容量法测定镁粉的松装密度。 本标准适用于测定自由通过装有2500um筛网的漏斗的粉末。
Magnesium powders--Determination of apparent density--Scott volumetric method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号