H32 焦炭 标准查询与下载
共找到 152 条与 焦炭 相关的标准，共 11 页
Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of grain stability using a laboratory vibration mill
- ICS
- 71.100.10;71.120.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of unbaked test pieces and determination of apparent density after compaction
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of residual-hydrogen content
- ICS
- 71.060.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
本标准规定了铁合金用焦炭的术语和定义、分类与牌号、技术要求、试验方法、检验规则、包装、标志、运输、贮存和质量证明书等。 本标准适用于煤高温、中低温干馏所得的铁合金用焦炭，金属硅、电石等其他行业用焦炭可参照使用。
Coke for ferroalloy
- ICS
- 75.160.10
- CCS
- H32
- 发布
- 2015-07-14
- 实施
- 2016-01-01
本标准规定了测定焦炭反应性及反应后强度试样的机械制备用仪器和设备、试样制备方法、设备安装与维护等要求。 本标准适用于测定焦炭反应性及反应后强度试样的制备。
Technical specification of mechanical sample preparation for measuring coke reactivity index and coke strength after reaction
- ICS
- 75.160.10
- CCS
- H32
- 发布
- 2015-07-14
- 实施
- 2016-01-01
Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Part 2. Determination of flexural strength by the four - point method
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2015
- 实施
- 2016-07-01
Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of oil content. Method by solvent extraction
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2015
- 实施
- 2016-07-01
Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2015
- 实施
- 2016-07-01
Carbonaceous materials used in the production of aluminium. Cokes for electrodes. Sampling
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2015
- 实施
- 2016-07-01
Carbonaceous materials for the production of aluminium. Cathode block materials. Part 1. Determination of the expansion due to sodium penetration with application of pressure
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2015
- 实施
- 2016-07-01
Coke. Determination of total moisture
- ICS
- 75.160.10
- CCS
- H32
- 发布
- 2013-05-31
- 实施
- 2013-05-31
This International Standard specifies a method for determining the total moisture of coke. It can be used for the determination of moisture of blast-furnace coke, foundry coke and other high-temperature carbonization products.
Coke.Determination of total moisture
- ICS
- 75.160.10
- CCS
- H32
- 发布
- 2013-05-01
- 实施
本标准规定了散装焦炭仓库取样的相关术语和定义、人工取样工具、取样方法，工业分析试样和物理性能检验试样的采取方法。 本标准适用于仓库中散装焦炭的工业分析和物理性能检验试样的采取。
Methods of sampling coke in bulk in the warehouse
- ICS
- CCS
- H32
- 发布
- 2012-12-12
- 实施
- 2013-07-01
Cleamer production standard-semicoke
- ICS
- 75.160.10
- CCS
- H32
- 发布
- 2011-01-18
- 实施
- 2011-02-20
This practice may be used to provide a representative sample of the coke from which it is collected. Because of the variability of coke and the wide variety of sampling equipment, caution must be exercised in all stages of sampling, from system specifications and equipment procurement to equipment acceptance testing and actually taking the final sample. This practice also provides an analysis sample of coke from the gross or divided sample. The analysis samples can be used to determine the value of the coke represented, its ability to meet specifications, as well as for other purposes.1.1 This practice covers procedures for the collection and reduction of samples of coke to be used for physical tests, chemical analyses, and the determination of total moisture. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Values in SI units [or inch-pound units] shall be obtained my measurement in SI units [or inch-pound units] or by appropriate conversion, using the Rules for Conversion and Rounding given in , of measurements made in other units [or SI units]. Values are state ins SI units when inch-pound units are not used in practice. 1.3 This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
- ICS
- 75.160.10 (Solid fuels)
- CCS
- H32
- 发布
- 2011
- 实施
