H60 有色金属及其合金产品综合 标准查询与下载

KS D 3530-2007 普通结构用轻量型材

이 규격은 건축 기타의 구조물에 사용하는 냉간 성형 경량 형강(이하, 경량 형강이라 한다.

Light gauge steels for general structure

KS D 3531-2007 抗腐蚀耐高温合金热轧棒材

이 규격은 내식 내열 초합금 봉(원형봉, 각봉, 6각봉 및 평재를 총칭하여 이하 봉이라 한

Corrosion-resisting and heat-resisting superalloy bars

KS D 2120-2007 模塑料散沙

이 규격은 점토분 2 % 이상의 주형용 산사(이하 산사라고 한다.)와 점토분 2 % 미만의

Molding natural sand and silica sand

JIS B 7914-2:2007 测量和边界标记.第2部分:金属标志

この規格は，測量基準点及び各種の境界標識用として使われる金属を素材とする標識くい(以下，“金属びょう”という。)について規定する。ただし，特殊な条件下の測量作業に使用される金属びょうには適用しない。

Marks for survey and boundary -- Part 2: Metal markers

ASME BPVC Section 2 Part B-2007 ASME锅炉和压力容器规范.第2节:材料.第B部分:有色材料规范

ASME Boiler & Pressure Vessel Code - Section 2: Materials - Part B: Nonferrous Material Specifications

ASME Boiler & Pressure Vessel Code - Section 2: Materials - Part B: Nonferrous Material Specifications

ASTM B536-07 镍-铁-铬-硅合金(UNS N08330和N08332)厚板材、薄板材和带材的标准规范

1.1 This specification covers nickel-iron-chromium silicon alloys (UNS N08330 and UNS N08332)* plate, sheet, and strip intended for heat resisting applications and general corrosive service.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

ASTM B534-07 铜-钴-铍合金及铜-镍-铍合金厚板材、薄板材、带材和轧制棒材的标准规范

1.1 This specification establishes the requirements for plate, sheet, strip, and rolled bar. The following alloys are included: PreviouslyNominal Composition, %Copper AlloyUsedUNS No.DesignationBerylliumCobaltNickelC17500Alloy 100.62.5?/TD>C17510Alloy 3 or 140.4?/TD>1.81.2 The intent is to provide a system of interchangeable alloys.1.3 Units8212;Values stated in inch-pound units are to be regarded standard. The values given in brackets are mathematical conversions to SI units, which are provided for information only. 1.4 The following safety hazard caveat pertains only to the test methods described in this specification:1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B240-07 铸造和压模铸件用铸锭结构中锌和锌铝(ZA)合金的标准规范

1.1 This specification covers commercial zinc and zinc-aluminum (ZA) alloys in ingot form for remelting for the manufacture of pressure die castings, foundry castings and continuous cast bar stock as designated and specified in . Seven alloy compositions are specified, designated as follows:1.2 Zinc alloys Z33521, Z33522, Z35530, and Z35540 are used primarily for remelting in the manufacture of pressure die castings. Zinc-aluminum alloys Z35635, Z35630, and Z35840 are used for remelting in the manufacture of both foundry and pressure die castings. Castings made from these ingots are specified in Specification B 86, Standard Specification for Zinc and Zinc-Aluminum Alloys for Foundry and Die Castings.1.3 The values stated in inch-pound units are to be regarded as standard.1.4 Systems of nomenclature used to designate zinc and zinc-aluminum (ZA) alloys used for casting are described in Appendix X1.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

ASTM E539-07 6铝4钒钛合金的X射线荧光光谱测定分析用标准试验方法

This method is suitable for providing data on the chemical composition of 6Al-4V titanium alloys for the scope elements. It is intended to be used for routine production control and for determination of chemical composition for the purpose of certifying material specification compliance. Additionally, the analytical performance data included with this method may be used as a benchmark to determine if similar X-ray spectrometers provide equivalent precision and accuracy.1.1 This test method covers the X-ray fluorescence analysis of 6Al-4V titanium alloy for the following elements in the ranges indicated: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 10.

Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy

GJB 5913-2006 镍钛铌形状记忆合金棒材规范

本规范规定了镍钛铌形状记忆合金棒材的要求、质量保证规定和交货准备等。 本规范适用于宽热滞形状记忆合金管接头或连接件用NiTiNb（代号 TN479）镍钛铌形状记忆合金圆棒。

Specification for NiTiNb shape memory alloy bars

YS/T 594-2006 硝酸铑

本标准规定了硝酸铹的要求、试验方法、检验规则以及标志、包装、运输、贮存及合同内容。 本标准适用于汽车尾气催化转化器负载铹涂层用硝酸铹溶液。

Rhodium(III)nitrate

YS/T 591-2006 变形铝及铝合金热处理

本标准规定了变形铝及铝合金热处理的要求和质量保证措施。 本标准适用于一般工业用变形铝及铝合金产品的热处理。 变形铝及铝合金材料零部件的热处理可参照执行本标准。

Heat treatment of wrought aluminium and aluminium alloys

ASTM B899-06 有色金属和合金的相关标准术语

1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02.1.2 To standardize the terminology used in these documents.1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.

Standard Terminology Relating to Non-ferrous Metals and Alloys

ASTM B722-06 镍-铬-钼-钴-钨-铁硅合金(UNS N06333)无缝管道和管标准规范

1.1 This specification covers alloy N06333 in the form of hot-finished and cold-finished seamless pipe and tube intended for heat-resisting applications and general corrosive service. The general requirements for pipe and tube are covered in Specification B 829.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

ASTM B462-06 腐蚀性锻制或轧制的UNS N06030、N06022、N06035、N06200、N06059、N06686、N08020、N08024、N08026、N08367、N10276、N10665、N10675、N10629、N08031、N06045、N06025、和R20033合金管法兰、锻制配件、阀门及零件标准规范

1.1 This specification covers forged or rolled UNS N06030, UNS N06035, UNS N06022, UNS N06200, UNS N06059, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045, UNS N06025, and UNS R20033* pipe flanges, forged fittings, and valves and parts intended for corrosive high-temperature service.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, R20033 Alloy Pipe Flanges, Forged Fitting, Values Parts for Corrosive

KS D 9201-2005 联轴

이 규격은 노허브 배수용 주철관의 파이프와 파이프 또는 부속을 연결하는 커플링에 대하여 규

Coupling

ASME BPVC Section 2 Part B Addenda-2005 ASME锅炉和压力容器规范.第2部分:材料.B部分:非铁材料规范.补充件2005

ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part B: Nonferrous Material Specifications; 2005 Addenda July 1, 2005

ASTM B898-05e1 活性和难溶金属包覆板的标准规范

1.1 This specification covers plate consisting of a base metal to which is bonded, integrally and continuously, on one or both sides a layer of one of the following: titanium, zirconium, tantalum, niobium, and their alloys. The material generally is intended for pressure vessel use.1.2 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses and in metric tables are provided for information only.

Standard Specification for Reactive and Refractory Metal Clad Plate

ASTM B898-05 活性和难溶金属包覆板的标准规范

1.1 This specification covers plate consisting of a base metal to which is bonded, integrally and continuously, on one or both sides a layer of one of the following: titanium, zirconium, tantalum, niobium, and their alloys. The material generally is intended for pressure vessel use.1.2 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses and in metric tables are provided for information only.

Standard Specification for Reactive and Refractory Metal Clad Plate

ASTM B275-05 铸造和锻造某些有色金属和合金的标准实施规程汇编

1.1 This practice covers a system originally adopted for designating light metals and alloys, cast and wrought, and later extended to certain heavier, base-metal die-casting alloys. Those designations, which are currently being used in specifications under the jurisdiction of Committees B02 on Nonferrous Metals and Alloys and B07 on Light Metals and Alloys, are listed in Table X2.1.1.1.1 The alloy designations now being used in Committee B07 specifications for aluminum and aluminum-alloy wrought and cast products conform to ANSI H35.1. Alloys formerly codified by this practice and the corresponding ANSI designations are shown in Tables X3.1 and X3.2.1.2 This practice also provides a system for designating magnesium alloys that have been used commercially since 1952, and thus is intended to be the registration source for new magnesium alloys. A record of designations along with the established compositions is given in Table X4.1. 1.3 The equivalent Unified Numbering System (UNS) alloy designations shown in the appendixes are in accordance with Practice E 527.

Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought