J05 结构要素 标准查询与下载

ANSI/ASME B1.10M-2004 统一微型螺纹

Specifies the thread form, series, tolerance, and designation for the Unified Miniature Screw Threads. The series covers a diameter range of 0.30 mm to 1.40 mm, extending the metric M-Profile and unified thread series that begin at 1.6 mm.

Unified Miniature Screw Threads

AIA/NAS NASM51956-2003 FSC 5340型一孔导管带 修订1

Strap, Retaining, One Hole for Thin Wall Conduit (EMT) Rev. 1: FSC 5340

Strap, Retaining, One Hole for Thin Wall Conduit (EMT) Rev 1

AIA/NAS NAS 75-2003 Rev. 7钢或防锈钢压配合普通套管

THIS STANDARD IS ESTABLISHED AS A MEANS TO EFFECT THE STANOARDIZATION OF THE IOENTIFICATION OF WIRE TERMINATIONS AS USED ON ELECTRICAL ANO ELECTRONIC COMPONENTS.

Bushing-Plain Press Fit, Steel Or Cres REV. 7

DIN EN ISO 228-1 Supplement 1:2003 非螺纹密封的管螺纹. 第1部分: 尺寸, 公差和标识. 尺寸限制; 英文版本DIN EN ISO 228-1附件1: 2003-05

This supplement has been prepared by Section B Gewinde, Technical Committee NATG-B.4 Rohrgewinde of the Normenausschuss Technische Grundlagen (Fundamental Technical Standards Committee). International Standard ISO 228-1:2000 has been adopted by CEN as European Standard EN ISO 228-1:2003 without any modifications. With the publication of that standard at German national level as DIN EN ISO 228-1, DIN ISO 228-1:2001-04 has been withdrawn. As a consequence and in order to avoid confusion, Supplement 1 to DIN ISO 228-1:1994-12 has also been withdrawn and superseded by Supplement 1 to DIN EN ISO 228-1.

Pipe threads where pressure-tight joints are not made on the threads-part 1:dimensions,tolerances and designation-limits of size; English version of DIN EN ISO 228-1 Supplement 1:2003-05

DIN EN ISO 228-2:2003 非螺纹密封连接管螺纹.第2部分:极限量规检定

The standard specifies the verification of pipe threads by means of limit gauges.

Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003

DIN EN ISO 228-1:2003 非螺纹密封连接管螺纹.第1部分:尺寸、公差和命名

Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003

DIN EN ISO 228-1 Bb.1:2003 非螺纹密封连接的管螺纹.第1部分:尺寸、公差和命名.尺寸限值

Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size

ANSI/ASME B1.1-2003 统一英制螺纹(UN和UNR螺纹形状)

This Standard specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. (In order to emphasize that unified screw threads are based on inch modules, they may be denoted unified inch screw threads.) Several variations in thread form have been developed for unified threads; however, this Standard covers only UN and UNR thread forms. For easy reference, a metric translation of this Standard has been incorporated as APPENDIX C. Appendices A through E contain useful information that is supplementary to the sections of this Standard.

Unified Inch Screw Threads (UN and UNR Thread Form)

AIA/NAS NASM21209-2003 FSC 5325型防锈钢螺旋状螺丝钉粗纹和细纹插孔 修订1

NAS74OOTHRüNAS7416, "Bolt, 100 Deg. Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking", was adopted on 13-SEP-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Industrial Supply Center, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America Inc., 1250 Eye Street, N.W., Washington, DC 20005-3922.

Insert, Screw Thread, Coarse and Fine, Screw Locking, Helical Coil, Cres Rev. 1; FSC 5325

DIN ISO 965-5:2002 ISO通用公制螺纹.公差.第5部分:与镀锌前最大公差位置为H的热浸镀锌外螺纹相匹配的内螺纹的尺寸限制 (ISO 965-5:1998)

The document specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric internal screw threads conforming to ISO 262 having a basic profile according to ISO 68-1.

ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998)

DIN ISO 965-4:2002 ISO通用公制螺纹.公差.第4部分:与由镀锌后公差位置为H或G攻丝的内螺纹相匹配的热浸镀锌外螺纹的尺寸限制 (ISO 965-4:1998)

The document specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric external screw threads conforming to ISO 262 having a basic profile according to ISO 68-1.

ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998)

AIA/NAS NASM51964-2002 UNC-3A FSC 5305型普通和自动锁镉金属板合金钢六边形插孔固定螺丝钉 修订1

This non4overnment docwnent rn adopted on 30 January 1984 and ia approved for use by DoDe The indicated indwtry group has furnished the clearance required %y existing re@ations, Copies of the domment are stocked by the DoD Single Stock Point, Naval. ptrhl icatiorm and Forms Canter, PhSl.adelphia, PA 191 20, for issue to DoD activities only. Contractom and industry groups mat obtain copies directly from National 8tc?ndards AssociRtion, Ince y 5161 River Road, Rethesda, MD m16.

Setscrew, Hexagon Socket, Cup Point, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking Rev 1

ANSI/ASME B1.30-2002 螺纹:尺寸计算和尺寸修约的标准实施规程

The purpose of this Standard is to establish uniform and specific practices for calculating and rounding the numeric values used for inch and metric screw thread design data dimensions only. No attempt is made to establish a policy of rounding actual thread characteristics measured by the manufacturer or user of thread gages. Covered is the Standard Rounding Policy regarding the last figure or decimal place to be retained by a numeric value and the number of decimal places to be retained by values used in intermediate calculations of thread design data dimensions. Values calculated to this Standard for inch and metric screw thread design data dimensions may vary slightly from values shown in existing issues of ASME B1 screw thread standards and are to take precedence in all new or future revisions of ASME B1 standards as applicable except as noted in para. 1.2.

Screw Threads: Standard Practice for Calculating and Rounding Dimensions

BS EN 61346-2:2001 工业系统、装置、设备和工业产品.结构规则和基准命名.物品分类和分级代码

This part of IEC 61346 defines object classes and associated letter codes for these classes to be used in reference designations. The classification schemes are applicable for objects in all technical areas and may be applied at any position in a tree-like structure set up in accordance with IEC 61346-1. NOTE The classification of objects that are of interest from the location aspect only is not considered in the present edition of IEC 61346-2.

Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Classification of objects and codes for classes

AIA/NAS NASM21314-2001 FSC 5340型两孔导管皮带电缆 修订1

Strap, Retaining, Two Hole, for Pipe, Conduit, and Cable Rev.1; FSC 5340

Strap, Retaining, Two Hole, for Pipe, Conduit, and Cable Rev 1

DIN 34817:2001 米制螺纹焊接螺钉

The document specifies properties of weld screws with metric normal screw thread of M5 to M10 and metric close-fit threads of M12 to M14 of product class A.

Weld screws with metric thread

DIN 78:2001 螺栓尾部的凸度

The document specifies the length of protection of bolt ends.

Protrusions of bolt ends

AIA/NAS NASM77072-2001 FSC 5940型闭锁类一孔磷青铜冲压焊接拖拉终端

Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, Flat, One Hole FSC 5940

Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, Flat, One Hole

AIA/NAS NASM77073-2001 FSC 5940型闭锁类一孔磷青铜冲压焊接拖拉终端

Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type Flat, One Hole FSC 5940

Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type Flat, One Hole

ANSI/ASME Y14.6-2001 螺纹表示法

This Standard establishes requirements for pictorial representation, specification, and dimensioning of screw threads on drawings; it is not concerned with standards for dimensional control of screw threads. Information helpful in the design and selection of screw threads to meet specific requirements is included in the B1 series of the ASME Standards for Screw Threads.

Screw Thread Representation