J47 手工工具 标准查询与下载

DIN 4000-170:2014 性能表.第170部分:几何断定切口锉刀及粗锉刀

Tabular layouts of properties - Part 170: Files and rasps with geometrically determined cutting edges

ISO 2936:2014 螺钉和螺母用装配工具 内六角扳手

This International Standard specifies the dimensions, the method of test, the designation, and the marking of hexagon socket screw keys. It also specifies the minimum values of Rockwell hardness that are to be met. The specifications of this International Standard apply for tightening of hexagon socket screws for property class less than or equal to 12,9 as defined in ISO 898-1 and for tightening of socket set screws as defined in ISO 898-5. NOTE 1 Hexagon socket screw keys are listed under reference number 4103010 in ISO 1703.

Assembly tools for screws and nuts - Hexagon socket screw keys

BS ISO 2351-3:2014 螺钉和螺母用装配工具. 机动旋具头. 内六角螺钉旋具头

Assembly tools for screws and nuts. Machine-operated screwdriver bits. Screwdriver bits for hexagon socket screws

DB50/T 264-2014 钢锹

本标准规定了钢锹的型式与规格、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以优质碳素钢和优质碳素结构钢热轧薄钢板、钢带为原材料加工而成的钢锹。

steel shovel

ISO 2351-3:2014 螺钉和螺母用装配工具.机动旋具头.第3部分:六角凹头螺钉用螺丝刀

This part of ISO 2351 prescribes the technical specifications for machine-operated screwdriver bits for hexagon socket screws, listed in ISO 1703 under reference number 3203010. It applies to bits with male hexagon drive or with cylindrical flat-end drive as defined in ISO 1173 and to tips for screwdrivers as defined in ISO 2936. It also gives recommended combinations between tips and bits.

Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws

DIN 7200:2014 冲孔机

Hollow punches

DIN 5129:2014 分裂锤

Splitting hammers

QB/T 4620-2013 手动机械线缆剪

本标准规定了手动机械线缆剪的型式和标记、要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于电力、电气工程中剪切铜、铝电缆、铠装电缆、钢绞线、钢芯铝绞线、钢丝绳等线材的手动机械线缆剪(以下简称线缆剪)。

Hand mechanical cable cutters

JB/T 11740-2013 建工凿

本标准规定了建工凿的型式尺寸、技术要求和标志包装。本标准适用于开凿混凝土或砖体的建工凿。

Masonry chisels

QB/T 4619-2013 棘轮扳手

本标准规定了棘轮扳手的型式、基本尺寸和标记、要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于扳拧螺栓和螺母或其他紧固件的棘轮扳手。

Ratcheting wrenches

KS B ISO 2568:2013 手动和机动圆板牙和手操作的板牙架

이 표준은 수동 및 기계구동식 나사 깎기 둥근 다이스의 일반 치수에 대하여 규정한다. 나사

Hand- and machine-operated circular screwing dies and hand-operated die stocks

DIN 5208:2013 十字槽头镙钉用梅花改锥

Double offset screwdrivers for cross point screws

BS ISO 7755-6:2013 硬质合金去毛刺锉.弧形(球形)圆头锉(F型)

Hardmetal burrs. Arch round- (ball-) nose burrs (style F)

BS ISO 7755-12:2013 硬质合金去毛刺锉.倒锥形锉(N款)

Hardmetal burrs. Inverted cone burrs (style N)

BS ISO 7755-4:2013 硬质合金去毛刺锉.球形锉(D款)

Hardmetal burrs. Spherical burrs (style D)

BS ISO 7755-2:2013 硬质合金去毛刺锉.圆柱形锉(A款)

Hardmetal burrs. Cylindrical burrs (style A)

BS ISO 7755-9:2013 硬质合金去毛刺锉.60°和90°圆锥形锉(J和K款)

Hardmetal burrs. 60 degrees and 90 degrees cone burrs (styles J and K)

BS ISO 7755-8:2013 硬质合金去毛刺锉.火炬型锉(H款)

Hardmetal burrs. Flame burrs (style H)

BS ISO 7755-7:2013 硬质合金毛刺刀. 拱形刀尖毛刺刀 (G型)

Hardmetal burrs. Arch pointed-nose burrs (style G)

BS ISO 7755-5:2013 硬质合金去毛刺锉.第5部分:椭圆形锉(E款)

Hardmetal burrs. Oval burrs (style E)