J47 手工工具 标准查询与下载

ISO 3318:2016 螺钉和螺母的装配工具. 开口扳手, 套筒扳手和组合扳手. 头部最大宽度

Assembly tools for screws and nuts - Open-ended wrenches, box wrenches and combination wrenches - Maximum widths of heads

ISO 1085:2016 螺钉和螺母的装配工具. 双头扳手. 对边尺寸组配

This document specifies the size pairing of double-ended wrenches with unequal nominal widths across flats. NOTE The wrenches covered by this document are those identified in ISO 1703:2005 under reference nos. 1101020, 1102030, 1102040, 1102050, 1102060, 1102080.

Assembly tools for screws and nuts - Double-ended wrenches - Size pairing

BS ISO 1711-2:2016 螺钉和螺母的装配工具.技术规格.机动套筒(冲击)

Assembly tools for screws and nuts. Technical specifications. Machine-operated sockets (impact)

BS ISO 1711-1:2016 螺钉和螺母的装配工具.技术规格.手动扳手和套筒

Assembly tools for screws and nuts. Technical specifications. Hand-operated wrenches and sockets

ISO 1711-1:2016 螺钉和螺母的装配工具. 技术规格. 第1部分: 手动扳手和套筒

This document specifies minimum values for Rockwell hardness and torsional strength for hand- operated wrenches and sockets. It covers the following three series of torsion torques: — Series A: usual box wrenches and socket wrenches; EXAMPLE 1 Re ference nos. 1102010; 1102020 and 1102021; 1102030; 1102040; 1102050; 1102060; 1102090; 1102100; 1102110; 1102120; 1102130 and 1102131; 1102140; 1102150; 1108010; 1108020. — Series C: open end wrenches; EXAMPLE 2 Re ference nos. 1101010; 1101011; 1101020; 1101030; 1101040. — Series E: hand-operated square drive sockets. EXAMPLE 3 Reference nos. 2102010 and 2102011. NOTE The wrenches and sockets mentioned above are listed under their respective reference numbers in

Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets

DIN 475-1:2016 螺栓、螺钉、阀门和配件用扳手开口度

Widths across flats for bolts, screws, valves and fittings

DIN 6397:2016 铺地面砖用的镘刀

Floortiling trowel

DIN ISO 2936:2016 螺钉和螺母用装配工具.内六角螺钉扳手(ISO 2936-2014)

Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2014)

DIN 20152:2016 铲和锹手柄.型号、尺寸、要求、试验和标记

Shovel and spade handels - Types, dimensions, requirements, testing, marking

DIN 20151:2016 1300铲柄.尺寸、要求，试验和标记

Shovel handle 1300 - Dimensions, requirements, testing, marking

DIN 5112:2016 2kg以上钉锤用木锤柄

Timber handles for hammers above 2 kg

DIN 68340:2016 木制锤柄.交货技术条件

Timber handles for impact tools - Technical specifications

DIN 5111:2016 2kg以下钉锤用木锤柄

Timber handles for hammers up to 2 kg

DIN 5135:2016 2Kg以下大铁锤木锤柄

Timber handles for sledge hammers up to 2 kg

DIN 87312:2016 填充和测深管用平头螺帽的平端键

Flat-ended keys for deck screw caps for filling and sounding pipes

DIN 87310:2016 带内四方和扁平端的多用键

Multi-purpose keys with inner square and flat ends

JIS B 4635 ERRATUM 1:2016 勘误

ERRATUM

QB/T 4940-2016 手动陶瓷砖切割机

本标准规定了手动陶瓷砖切割机（手动陶瓷砖切割器）的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于以手工机械方式切割GB/T 4100规定的各类陶瓷砖的手动陶瓷砖切割机（手动陶瓷砖切割器）。

Manual ceramic tile cutter

QB/T 4939-2016 钢冲

本标准规定了钢冲的产品分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于以手工方式在金属、非金属上冲击标记、中心孔或去除销、键、铆钉等作业用的钢冲。

Metal punches

QB/T 4941-2016 钢凿

本标准规定了钢凿的产品分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于以手工方式切凿金属、非金属，开沟槽、键槽，切削等作业用的钢凿。

Metal chisels