J47 手工工具 标准查询与下载

DIN ISO 1711-1:2021 螺钉和螺母用装配工具. 技术规范. 第1部分: 手动扳手和套筒(ISO 1711-1-2019)

This document contains minimum values for Rockwell hardness and torsional strength for hand-operated wrenches and sockets.

Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2019)

FORD ASL METALS-8A-2020 核准来源清单（ASL）-金属类-轴承

APPROVED SOURCE LIST (ASL) - CATEGORY METALS - BEARING

NF E74-328:2020 螺钉和螺母装配工具. 棘轮扳手. 技术要求

Le présent document spécifie les dimensions et les exigences techniques des clés à cliquet utilisées pour le montage et le démontage des éléments de fixation hexagonaux et hexagonaux doubles.NOTE 1Les clés couvertes par le présent document sont identifiées dans l'ISO 1703:2018sou

Assembly tools for screws and nuts - Ratcheting wrenches - Technical requirements

ABNT NBR 16923-2020 手工工具 - 锥形冲头

Hand tools - Drift punches

ABNT NBR 16924-2020 手动工具 - 中心冲头

Hand tools - Centre punches

DIN 7334:2020-11 园艺工具. 最大长度为100 cm的手动园艺剪刀. 安全

This document applies to manually operated shears with a maximum length of 100 cm designed for cutting branches, hedges or shrubs. It lays down safety requirements and testing for the design and construction.

Garden Tools - Manually operated garden shears with a maximum length of 100 cm - Safety

T/CNPPA 3008-2020 空心胶囊规格尺寸及外观质量

       空心胶囊的质量保证来源于全过程的质量控制 ， 包括使用的原料 、 生产工艺 、 生产环境 、 批次划分 、包装 、 贮存 、 运输等影响产品质量的因素及环节均应符合相应的技术规范要求 。       本标准适用于空心胶囊规格尺寸和外观质量的相关要求 。 空心胶囊的质量除符合本标准的相关技术要求 ， 还应符合 《 药用辅料生产质量管理规范 》《 中华人民共和国药典 》《 空心胶囊通用要求 》 等国家和协会相关规定 ， 以保证空心胶囊的质量和安全 。

Hollow Capsule Size and Appearance Quality

ASME B107.110-2019 套筒扳手、手柄和附件

This Standard provides performance and safety requirements for socket wrenches (sockets), handles used with these wrenches, nutdrivers, and attachments used with socket wrenches, hereinafter collectively referred to as tools. The tools covered in this Standard are listed by Category number in Table 3-1. The names and intended uses given in Table 3-1 are those generally recognized. Inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Manufacturers may produce sizes not listed in this Standard. Consumers are requested to consult with manufacturers concerning lists of stock production sizes and lengths. 本标准提供了性能和安全要求套筒扳手（套筒）、手柄用于这些扳手、螺母起子和附件与套筒扳手一起使用，以下统称为工具。本标准涵盖的工具按表3-1中的类别编号列出，表3-1中给出的预期用途通常是辨识。 本标准中未包含尺寸数据旨在暗示所描述的所有产品这里是库存生产规模。制造商可以生产本标准中未列出的尺寸。消费者请咨询制造商库存生产尺寸和长度列表。

Socket Wrenches, Handles, and Attachments

ASME B107.500-2020 钳子和剪刀

This Standard provides performance and safety requirements for pliers suitable for cutting wire; for long-nose, long-reach pliers; for hand shears generally used for cutting sheet metal; for wire-twister pliers, which are used primarily for securing safety wires; for pliers suitable for inserting and removing internal and external retaining rings, including those covered by ASME B18.27; for pliers having gripping surfaces and/or cutting edges; for cutters and pliers less than 6 in. long, equipped with a spring, typically used in the manufacture of electronic equipment; for adjustable joint and slip joint pliers; for locking pliers that are suitable for gripping, clamping, pinching, cutting, and wrenching; for pliers (also known as Cannon Plug Pliers) that are used primarily for connecting or disconnecting threaded lock collars of electrical connectors; and for wire strippers, and the cutting and stripping functions of multipurpose tools, for use on solid and stranded copper wire. The tools covered in this Standard are listed by Category number in Sections 6 through 16. Inclusion of dimensional data in this Standard does not mean that all products described herein are stock production sizes, nor that all production sizes are listed. Consumers should consult with manufacturers concerning lists of stock production sizes. This Standard also details the purpose, apparatus, procedures, and performance specifications for the functional testing of pliers and shears. It is intended to be used by manufacturers, purchasers, and other persons involved with evaluating these products. Test procedures described herein are used to evaluate conformance to performance requirements. This Standard may be used as a guide by state authorities or other regulatory bodies in the formulation of laws or regulations. It is also intended for voluntary use by establishments that manufacture the tools covered. 本标准规定了适用于切割钢丝的钳子的性能和安全要求；用于长嘴、长伸钳；用于通常用于切割金属板的手动剪切机；用于扭线钳，主要用于固定安全线；适用于插入和拆卸内外挡圈的钳子，包括ASME B18.27中规定的那些；用于具有夹紧表面和/或切割边缘的钳子；对于小于6英寸的刀具和钳子。长，配有弹簧，通常用于制造电子设备；用于可调接头和滑动接头钳；适用于夹持、夹紧、夹紧、切割和拧动的锁紧钳；用于主要用于连接或断开电气连接器的螺纹锁环的钳子（也称为Cannon塞钳）；以及用于实心和绞合铜线的多用途工具的切割和剥离功能。本标准涵盖的工具按第6节至第16节中的类别编号列出。 本标准中包含尺寸数据并不意味着本文所述的所有产品均为库存生产尺寸，也不意味着列出了所有生产尺寸。消费者应与制造商协商库存生产规模清单。 本标准还详细说明了钳子和剪切机功能测试的目的、设备、程序和性能规范。它旨在用于制造商、采购商和其他参与评估这些产品的人员。本文描述的测试程序用于评估是否符合性能要求。

Pliers and Shears

ASME B107.17-2020 扳手开口的量规和心轴

This Standard establishes final nspection gage sizes and test mandrel sizes for wrench openings and spark plug wrench openings for inch and metric sizes. This Standard does not cover every available size, only those most commonly manufactured. 本标准规定了最终检验量规尺寸扳手开口和火花的试验心轴尺寸英制和公制尺寸的螺塞扳手开口。本标准不包括所有可用尺寸，仅包括常规尺寸。

Gages and Mandrels for Wrench Openings

ASME B107.100-2020 扁平扳手

This Standard provides performance and safety requirements for combination, open end, box, and flare nut wrenches; open end adjustable wrenches, with rack and worm adjustment, generally used on both hexagonal and square fasteners; crowfoot wrenches having a wrench component of the open end type or flare nut type; and ratcheting box wrenches used in hexagonal (6-point), double-hexagonal (12-point), square (4-point), and double-square (8-point) wrenching applications. The tools covered herein are listed by Category number in Table 4-1. Inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Manufacturers may make sizes not listed in this Standard. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. 本标准提供了性能和安全要求用于组合、开口端、箱形和火炬螺母扳手；开口可调扳手，带齿条和蜗杆调节，通常用于六角和方形紧固件；具有开口端型或扩口螺母型扳手组件；和六角（6点）棘轮套筒扳手，双六边形（12点）、方形（4点）和双方形（8点）扳手应用。本文涵盖的工具按类别编号列出表4-1：。本标准中未包含尺寸数据旨在暗示所描述的所有产品这里是库存生产规模。制造商可以制造本标准中未列出的尺寸。消费者请咨询制造商。 库存生产规模列表。

Flat Wrenches

QB/T 5373-2019 F型夹

F-type clamp

QB/T 5376-2019 单头呆扳手

single head wrench

QB/T 5377-2019 内十二角螺钉旋具头

Internal twelve-point screw driver head

QB/T 5378-2019 内六角花形螺钉旋具头

Hexalobular screwdriver bit

QB/T 5375-2019 手用金属剪

Hand metal scissors

ASME B107.56-2018 车身修理工具

This Standard provides performance and safety requirements for body repair hammers, dolly blocks, and spoons that are intended specifically for the reshaping of sheet metal panels normally found on bodies and fenders of motor vehicles. These tools are intended to be used separately or together for repairs. This Standard is intended to serve as a guide in selecting, testing, and using the hand tools covered herein. It is not the purpose of this Standard to specify the details of manufacturing. This Standard is also intended to serve as a guide for the development of manuals and posters, and for training personnel to work safely. 本标准规定了车身维修锤、小车块和勺子的性能和安全要求，这些锤子、小车块和勺子专门用于重塑通常在机动车辆车身和挡泥板上发现的板材板。 这些工具旨在单独使用或用于维修。 本标准旨在作为选择、测试和使用此处涵盖的手动工具的指南。本标准的目的不是规定制造的细节。 本标准还旨在作为手册和海报的编制指南，以及培训人员安全工作的指南。

Body Repair Tools

DIN EN 15895:2018 弹药推动手持工具. 安全要求. 打钉和硬标记工具; 德文版本EN 15895-2011+A1-2018

This European Standard contains safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston). To EN 15895:2011 the following changes are included: a) adjustment to EN ISO 12200:2010; b) Requirement on carrying box adjusted (5.2); c) Requirements on essential dimensions added (5.3.4); d) Requirements on surface temperatures added (5.4.3); e) Requirements on safe retention of the piston adjusted (5.6); f) Verification of essential dimensions added (6.3.3); g) Adjustment of the temperature verification (6.5); h) Verification of the safe piston retention adjusted (6.6); i) essential safety dimensions added as Annex F; j) editorial adjustment.

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools; German version EN 15895:2011+A1:2018

BS ISO 3316:2018 螺钉和螺母的装配工具 手动方头套筒扳手的附件 尺寸和测试

Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests

BS ISO 3315:2018 螺钉和螺母的装配工具 手动方头套筒扳手的驱动部件 尺寸和测试

Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests