J48 气动工具 标准查询与下载
共找到 179 条与 气动工具 相关的标准，共 12 页
本标准规定了叶片式气动发动机的基本参数。 本标准适用于回转式气动工具和气动马达所用单向和双向叶片式气动发动机。
Basic parameters of vane air motor
- ICS
- CCS
- J48
- 发布
- 1994-07-18
- 实施
- 1995-07-01
Specifies a laboratory performance test method for power assembly tools for installing threaded fasteners. Gives instructions on what to test for and how to evaluate and present the test data. Is applicable to tools which apply torque continuously, i.e. does not apply e.g. to impact and ratchet wrenches.
Rotary tools for threaded fasteners - Performance test method
- ICS
- 25.140.01
- CCS
- J48
- 发布
- 1994-05
- 实施
この規格は，附属書に規定するブラインドリベットを用いて構成部品などを締結するために使用するハンドりべッタについて規定する。
Hand riveter
- ICS
- 25.140.30
- CCS
- J48
- 发布
- 1994-03-01
- 实施
本标准规定了直柄式气动砂轮机的基本参数与型号编制、技术要求、试验方法与检验规则、标志、包装、运输及贮存。 本标准适用于直柄式气动砂轮机
Straight handle pneumatic grinder
- ICS
- CCS
- J48
- 发布
- 1993-11-21
- 实施
- 1994-03-01
本标准规定了气铲用铲头的型式与基本尺寸、技术要求、检验方法及验收规则、标志、包装、运输与贮存。 本标准适用于气铲用的铲头。
Shovel head for air shovel
- ICS
- CCS
- J48
- 发布
- 1991-05-18
- 实施
- 1992-01-01
Cornbread for pneumatic riveting machine
- ICS
- CCS
- J48
- 发布
- 1991-05-18
- 实施
- 1992-01-01
本标准规定了气动捣固机用捣头的型式与基本尺寸、技术要求、验收规则、标志、包装、运输与贮存。 本标准适用于气动捣固机用的捣头。
Pneumatic tamping machine with tamper
- ICS
- CCS
- J48
- 发布
- 1991-05-18
- 实施
- 1992-01-01
本标准规定了气镐用镐钎的型式与基本尺寸、技术要求、检验方法及验收规则、标志、包装、运输与贮存。 本标准适用于于气镐用的镐纤。
Pick Brazing for Air Picks
- ICS
- CCS
- J48
- 发布
- 1991-05-18
- 实施
- 1992-01-01
Numbering System for Standard Drills, Standard Taps, and Reamers November 1990; IMAGES ARE NOT INCLUDED; PLEASE REFER TO GLOBAL
Numbering System for Standard Drills, Standard Taps, and Reamers November 1990; IMAGES ARE NOT INCLUDED; PLEASE REFER TO GLOBAL
- ICS
- CCS
- J48
- 发布
- 1991-01-01
- 实施
Pliers and nippers for electronics - Test methods
- ICS
- 25.140.30
- CCS
- J48
- 发布
- 1989-11
- 实施
- 1989-11-15
Flat- and shear-picks without and with shanks for pick hammers are used to cut off nuts, screw-heads, rivets and to machine sheet-metal-edges.
Pick hammers; flat- and shearpick without and with shank
- ICS
- 73.100.30
- CCS
- J48
- 发布
- 1989-09
- 实施
Establishes terms and definitions in English and French relating to pneumatic tools and machines, comprises: pneumatic motors and pneumatic tools including rotary tools and percussive tools.
Compressors, pneumatic tools and machines; vocabulary; part 3: pneumatic tools and machines
- ICS
- 23.140;25.140.10
- CCS
- J48
- 发布
- 1989-04
- 实施
- 1989-04-01
Pneumatic tools and machines; vocabulary
- ICS
- 23.140;25.140.10
- CCS
- J48
- 发布
- 1988-03
- 实施
- 1988-03-15
Point attack picks with shanks for pneumatic hammers are used for working coal and rock.
Pick hammers; round picks with shank
- ICS
- 4620
- CCS
- J48
- 发布
- 1988-01
- 实施
Point attack picks without shanks for pneumatic hammers are used for working coal and rock.
Pick hammers; round picks without shank
- ICS
- 4620
- CCS
- J48
- 发布
- 1988-01
- 实施
Hand-held pneumatic assembly tools for installing threaded fasteners. Reaction torque and torque impulse measurements.
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 1985-12-01
- 实施
- 1985-12-20
This is Addendum 1 to ISO 1180-1983 (Shanks for pneumatic tools and dimensions of chuck bushings)
Shanks for pneumatic tools and fitting dimensions of chuck bushings; addendum 1
- ICS
- 25.060.20
- CCS
- J48
- 发布
- 1985-07
- 实施
Detailed instructions on measurement of power output and air consumption and means of adjusting the measured values to specified conditions.
Methods for performance tests for rotary and percussive pneumatic tools
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 1985-01-31
- 实施
- 1985-01-31
