J48 气动工具 标准查询与下载

JB/T 7172-2006 直柄式气动砂轮机

本标准规定了直柄式气动砂轮机的基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于直柄式气动砂轮机（以下简称产品）。

Straight pneumatic grinders

JB/T 8411-2006 冲击式气扳机

本标准规定了冲击式气扳机的型式与基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于以压缩空气为动力，具有冲击机构的冲击式气扳机。 本标准不适用于定扭矩冲击式气扳机和纯扭式气扳机。

Pneumatic impact wrenches

JB/T 5134-2006 气铲用铲头

本标准规定了气铲用铲头的型式与尺寸、技术要求、验收规则、标记和标志、包装、运输与贮存。 本标准适用于气铲用铲头（以下简称铲头）的设计、制造、验收与使用。

Chiselles for pneumatic chipping hammers

KS B ISO 5391:2005 风动工具和机器.词汇

이 규격은 각종 공압 공구 및 기계, 그리고 이들과 함께 사용하는 부착물의 용어를 정의한

Pneumatic tools and machines－Vocabulary

KS B ISO 6544:2005 安装螺纹紧固件用手持式气动工具.扭矩反作用和扭矩冲击测量

이 규격은 나사산 패스너를 설치하기 위한 휴대용 공압 공구에서 발생하는 반작용 토크와 토

Hand-held pneumatic assembly tools for installing threaded fasteners-Reaction torque and torque impulse measurements

KS B ISO 2787:2005 旋转冲击式风动工具.性能试验

이 규격은 공압 공구의 성능 시험 방법과 공압 공구를 공급하기 위한 기술적 조건을 규정 하

Rotary and percussive pneumatic tools-Performance tests

ASME B107.4-2005 便携式手动,碰撞式,气动和电动工具(冲击工具除外)用传动端和主轴端

This standard applies to portable power tools for drilling, grinding, polishing, sawing, and driving threaded fasteners & hand tools for driving threaded fasteners. Other tools not classed as percussion tools belong in this category and may be added by revision, or by addition, through the usual procedure. This standard includes dimension and tolerances for both driving and driven elements where such coordination is important and not established by reference to the pertinent American National Standards. All dimensions are in inches and millimeters.

Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded)

JB/T 5129-2004 纯扭式气动螺丝刀

　　本标准规定了纯扭式气动螺丝刀的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输及贮存等。 　　本标准适用于纯扭式气动螺丝刀。

Non-impact pneumatic screwdrivers

JB/T 5130-2004 气动铆钉机用窝头

　　本标准规定了气动铆钉机用窝头的型式与尺寸，技术要求，严守规则以及标志、包装、运输与贮存。 　　本标准适用于气动铆钉机用窝头的设计、制造、验收与适用。

Snap for pneumatic riveting hammers

BS ISO 5391:2004 气动工具和机械.词汇

This International Standard provides a vocabulary for the various types of pneumatic tools and machines, and the attachments that are used with them. The terms are given by category: general, tools for removing and shaping material (portable and fixed, rotary and percussive), tools for assembly work (portable rotary and reciprocating percussive), tools for lifting, and miscellaneous. NOTE The use of the terms "tool" and "machine" could be confusing in the field of pneumatic power tools. "Pneumatic tool" is used for hand-held machines and "pneumatic machine" for larger machines, often suspended or mounted. However, "tool" is also used for the inserted drill, file, chisel, etc. which is fitted to the machine spindle. In order to differentiate between pneumatic tool and inserted tool, the term "power tool" can be used for the former.

Pneumatic tools and machines - Vocabulary

ISO 5391:2003 风动工具和机器.词汇

This International Standard provides a vocabulary for the various types of pneumatic tools and machines, and the attachments that are used with them. The terms are given by category: general, tools for removing and shaping material (portable and fixed, rotary and percussive), tools for assembly work (portable rotary and reciprocating percussive), tools for lifting, and miscellaneous. NOTE The use of the terms "tool" and "machine" could be confusing in the field of pneumatic power tools. "Pneumatic tool" is used for hand-held machines and "pneumatic machine" for larger machines, often suspended or mounted. However, "tool" is also used for the inserted drill, file, chisel, etc. which is fitted to the machine spindle. In order to differentiate between pneumatic tool and inserted tool, the term "power tool" can be used for the former.

Pneumatic tools and machines - Vocabulary

KS B ISO 3857-3:2002 压缩机、风动工具和机械.用语.第3部分:风动工具和风动机械

이 규격은 압축기, 공압 공구 및 기계에 관련된 용어의 3부(공압 공구 및 기계)에 대해

Compressors, pneumatic tools and machines-Vocabulary-Part 3:Pneumatic tools and machines

UL SUBJECT 7700-2-1-2001 便携式气动工具的调查大纲;第2部分:电钻和旋转锤的详细要求.发布编号:1

This Section of Part 1 is applicable except as follows: Modify 1. f as follows: The term "tools" is replaced with "drills, rotary hammers and impact drills."

Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Drills and Rotary Hammers Issue Number: 1

UL SUBJECT 7700-2-2-2001 便携式气动工具的调查大纲;第2部分:螺丝刀,棘轮和冲击扳手的详细要求.发布编号:1

This Section of Part 1 is applicable except as follows: Modify 1. f as follows: The term "tools" is replaced with "drills, rotary hammers and impact drills."

Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Screwdrivers, Ratchets and Impact Wrenches Issue Number: 1

UL SUBJECT 7700-2-3-2001 便携式气动工具的调查大纲;第2部分:砂轮机的详细要求.发布编号:1

This Section of Part 1 is applicable except as follows: Modify 1. f as follows: The term "tool" is replaced with "grinders, die grinders and angle grinders." This outline of investigation does not apply to sanders. Sanders are covered in the Outline of Investigation for Particular Requirements for Sanders, Polishers and Buffers, Subject 7700-2-4.

Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Grinders Issue Number: 1

UL SUBJECT 7700-2-33-2001 便携式气动工具的调查大纲;第2部分:便携式带锯的详细要求.发布编号:1

This Section of Part 1 is applicable except as follows: Modify 1. f as follows: The term "tools" is replaced by "portable bandsaws".

Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Portable Bandsaws Issue Number: 1

JB/T 51161-1999 气铲 产品质量分等

Air shovel product quality classification

JB/T 50024-1999 端面气动砂轮机 产品质量分等

Product quality classification of end face pneumatic grinder

JB/T 50025-1999 气动螺丝刀 产品质量分等

Pneumatic screwdriver product quality classification

JB/T 50026-1999 气动捣固机 产品质量分等

Pneumatic tamping machine product quality classification