J48 气动工具 标准查询与下载
共找到 179 条与 气动工具 相关的标准，共 12 页
本标准规定了端面式气动砂轮机的基本参数、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以压缩空气为动力的端面式气动砂轮机(以下简称产品)。
Pneumatic vertical grinders
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了气动铆钉机用窝头的型式与尺寸、技术要求、验收规则、标志、包装、运输与贮存。本标准适用于气动铆钉机用窝头(以下简称窝头)。
Snap for pneumatic riveting hammers
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了纯扭式气动螺丝刀的型式与基本参数、技术要求、检验方法、检验规则、标志、包装、运输与贮存。本标准适用于纯扭式气动螺丝刀(以下简称产品)。
Non-impact pneumatic screwdrivers
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2014-05-06
- 实施
- 2014-10-01
Polyurethane tubing for use primarily in pneumatic installations - Dimensions and specification
- ICS
- 23.040.20;23.040.70
- CCS
- J48
- 发布
- 2014-02
- 实施
本标准规定了气动液压千斤顶的基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。本标准适用于以压缩空气为动力的液压千斤顶(以下简称产品)。
Pneumatic hydraulic jacks
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了手持式气动倒角机的分类、型号编制、基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。本标准适用于以压缩空气为动力、适用于去除钢材锐角的气动倒角机(以下简称产品)。
Pneumatic chamfering machines
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012); German version EN ISO 11148-4:2012
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2013-05
- 实施
This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter “circular, oscillating and reciprocating saws”) intended for sawing. The circular, oscillating and reciprocating saws can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator’s hand or hands, with or without a suspension, e.g. a balancer. NOTE 1 At the time of publication, no circular, oscillating or reciprocating saws driven by internal combustion engines are known [other than circular saws with bonded abrasives and/or super abrasives (diamond) cut-off wheels]. Once these are identified, it is intended to amend this part of ISO 11148 to include such power tools. This part of ISO 11148 is applicable to — circular saws; — circular knives; — oscillating saws having a saw blade with a radius of 50 mm or less or a diamond cutting-off blade with a radius of 100 mm or less; — oscillating knives (including windshield knives); — reciprocating saws, including jig saws and power hack saws. NOTE 2 For examples of circular, oscillating and reciprocating saws, see Annex B. NOTE 3 For circular saws with bonded-abrasive and/or super-abrasive (diamond) cut-off wheels, see ISO 11148-7 This part of ISO 11148 is not applicable to special requirements and modifications of circular, oscillating and reciprocating saws for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to circular, oscillating and reciprocating saws when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of circular, oscillating and reciprocating saws in potentially explosive atmospheres. NOTE 4 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.
Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-12
- 实施
1.1 This outline of investigation applies to portable, pneumatic-powered tools. These tools are intended for connection to a compressed air power source with a maximum pressure of 200 psi and a regulator to reduce the pressure to the rated pressure of the tool. 1.2 These requirements apply to: buffers, drills, grinders, hammers, impact wrenches, nailers, nibblers, nut runners, polishers, ratchets, routers, sanders, saws, screwdrivers, shears, staplers, tappers, valve seat grinders and similar pneumatic tools. 1.3 These requirements apply to portable pneumatically powered tools that contain electrical and electronic components. 1.4 These requirements apply to accessories and attachments for use with portable pneumatic tools. 1.5 These requirements do not apply to fixed or stationary pneumatic tools, powder-actuated tools, rescue equipment, or tools powered by oxygen, combustible gas, combustible fuel or bottled gas including air. 1.6 These requirements do not apply to tools intended for use in a hazardous location as defined in the National Electrical Code, NFPA 70.
Outline of Investigation for Portable Pneumatic Tools (Issue 3)
- ICS
- CCS
- J48
- 发布
- 2012-07-18
- 实施
- 2012-07-18
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011); German version EN ISO 11148-1:2011
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-06-01
- 实施
Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011); German version EN ISO 11148-10:2011
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-06-01
- 实施
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011); German version EN ISO 11148-2:2011
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-06-01
- 实施
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011); German version EN ISO 11148-5:2011
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-06-01
- 实施
Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011); German version EN ISO 11148-11:2011
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-06-01
- 实施
Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011); German version EN ISO 11148-8:2011
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-06-01
- 实施
Hand-held non-electric power tools. Safety requirements. Compression power tools
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-01-31
- 实施
- 2012-01-31
Hand-held non-electric power tools. Safety requirements. Nibblers and shears
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-01-31
- 实施
- 2012-01-31
Hand-held non-electric power tools. Safety requirements. Assembly power tools for non-threaded mechanical fasteners
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-01-31
- 实施
- 2012-01-31
Hand-held non-electric power tools. Safety requirements. Rotary percussive drills
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2012-01-31
- 实施
- 2012-01-31
이 표준은 강한 기류를 팬으로 발생시키고 내연기관을 이용하는 등짐형 연무기의 설계와 제작에
Agricultural and forestry machinery-Knapsack combustionengine-driven mistblowers-Safety requirements
- ICS
- 65.060.40
- CCS
- J48
- 发布
- 2011-12-30
- 实施
- 2011-12-30
