J60 通用加工机械与设备综合 标准查询与下载

BS EN 12581:2005+A1:2010 涂覆设备.有机液体涂覆材料的浸涂和电沉积用机械.安全性要求

1.1 This European Standard applies to the design and construction of machinery for dip coating and electrodeposition of organic liquid coating material to industrial items. This machinery consists of the following equipment: ? Transport system including hoists; ? Dip tank and safety tank; ? forced ventilation system; ? ancillary equipment such as pumps, filters, heaters. This European Standard deals with the significant hazards, hazardous situations and events relevant to dip and electrophoretic coating machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). In addition, the equipment marking and minimum use requirements are specified. 1.2 This European Standard does not cover: ? automatic loading and unloading systems; ? lifting accessories; ? dip and electrophoretic coating tanks without any technical devices such as enclosure, lip extractions, pumps, heaters; ? machinery for organic liquid coating material preparation, supply and draining systems (e.g. pumps); ? water and waste liquids treatment machinery; ? dip and electrodeposition coating machinery for web or coil coating; ? dip and electrophoretic coating machinery with tank volume less than 1 m; This European Standard is not applicable to industrial machinery for dip or electrophoretic coating processes which are manufactured before the date of publication of this European Standard by CEN.

Coating plants.Machinery for dip coating and electrodeposition of organic liquid coating material.Safety requirements

KS B ISO 11042-1:2005 燃气轮机.废气排放.第1部分:测试和评估

이 규격은 가스 터빈으로부터 배출된 배기 가스의 측정 및 평가에 사용되는 방법들을 확립하

Gas turbines-Exhaust gas emission-Part 1:Measurement and evaluation

KS B 4093-2005 木材加工机械安全通则

? ??? ?? ?? ?? ? ? ?? ????? ??? ?? ??? ?? ??? ???

General code of safety for wood working machinery

BS EN 12921-1:2005 使用液体或蒸气的工业设备的表面清洁和预处理机器.通用安全要求

1.1 This standardapplies to machines for surface cleaning and pre-treatment – in the following called "cleaning machines" – of industrial items using liquids or vapours, i. e. stationary machines and related equipment for automated and manual cleaning and pre-treatment processes. NOTE Cleaning machines are operated with or without heating, for example as dipping or spraying or vapour condensation process, where additional using of ultrasound is possible. These cleaning machines could be designed as single-zone or multi-zone machine, chamber machines, drum cleaning machine, low lift truck machines, round time machines or tunnel (continuous) machines. To the extent of this document, cleaning machines for industrial items are considered as an assembly of the following equipment: ??pump(s) and/or other mechanical system of agitation, recirculation and spraying of cleaning liquid; ??forced ventilation system; ??heating system with temperature control; ??condensation system; ??filtration and separation system and/or solid particles extraction from the liquid; ??conveyor and/or handling system for the items to be processed; ??product handling systems and reciprocators which are part of the cleaning machine; ??control and/or monitoring systems; ??liquid handling system. 1.2 This European Standard deals with the common significant hazards, hazardous situations and events relevant to cleaning machines for industrial items using liquids or vapours when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This part of the standard defines the common safety requirements for all kinds of cleaning machines for industrial items using liquids or vapours and related common devices and should be used in connection with other parts of the EN 12921-series. The specific requirements specified in part 2 and following parts of EN 12921 take precedence over the respective requirements in EN 12921. NOTE In addition, where a cleaning machine is not covered by a specific part of this document, part 1 of EN 12921 can be used to establish the approach for dealing with the relevant risks. Specific hazards which are related to the type of cleaning liquid used are dealt with in the following documents: ??EN 12921-2 for water based cleaning liquids; ??EN 12921-3 for flammable cleaning liquids; ??prEN 12921-4 for halogenated solvents. 1.3 This standard is not applicable to: ??mobile portable cleaning; ??high pressure cleaning with high pressure water jet machines according to prEN 1829-1; ??conveyor dishwashing machines according to prEN 50416; ??surface cleaning appliances employing liquids according to EN 60335-2-54; ??commercial electric dishwashing machines according to EN 60335-2-58; ??cleaning with high pressure cleaners and steam cleaners according to EN 60335-2-79; ??all loading and unloading systems; ??automatic systems, e. g. robots as covered by EN 775; ??centrifuges as covered by EN 12547; ??pumps and pump units for liquids as covered by EN 809; ??plasma energy; ??mechanical blasting; ??heat and/or thermal energy; ??hazards related to drying processes; ??cleaning of textiles or clothes; ??food processing. 1.4 This standard is not applicable to cleaning machines for industrial items which are manufactured before the date of publication of this document by CEN.

Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Common safety requirements

BS EN 12921-2:2005 使用液体或蒸气的工业设备的表面清洁和预处理机器.使用水基清洁液的机械的安全

This European Standard deals only with the significant hazards of machines for surface cleaning and pre-treatment (in the following called "cleaning machines") of industrial items using water based cleaning liquids in the mode of suspension, solution or dispersion of compounds or substances in water applied by immersion and/or spraying in one or more stages. This European Standard should apply in combination with EN 12921-1. Both parts together cover all significant hazards relevant for cleaning machines for industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in this standard take precedence over the respective requirements in EN 12921-1. This standard should be applied together with EN 12921-3 in case of release of flammable vapours from water based cleaning liquids. This European Standard should be applied together with EN 12921-3 and prEN 12921-4 in case of use of water based cleaning liquids of which evaporating can lead to hazards caused by explosive atmospheres. Water based cleaning liquids containing a quantity of halogenated solvents exceeding 2 % of the volume are considered hazardous with respect to the creation of a potentially explosive atmosphere. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1. This European Standard does not apply to cleaning machines for industrial items using water based cleaning liquids which are manufactured before the publication of this standard by CEN.

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Safety of machines using water based cleaning liquids

BS EN 12921-2:2005+A1:2008 液体或蒸汽对工业品表面清洗和预处理用机械.第2部分:使用水基清洁液的机械安全性

This European Standard deals only with the significant hazards of machines for surface cleaning and pre-treatment (in the following called "cleaning machines") of industrial items using water based cleaning liquids in the mode of suspension, solution or dispersion of compounds or substances in water applied by immersion and/or spraying in one or more stages. This European Standard !applies" in combination with EN 12921-1. Both parts together cover all significant hazards relevant for cleaning machines for industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in this standard take precedence over the respective requirements in EN 12921-1. This standard should be applied together with EN 12921-3 in case of release of flammable vapours from water based cleaning liquids. This European Standard !applies" together with EN 12921-3 and prEN 12921-4 in case of use of water based cleaning liquids of which evaporating can lead to hazards caused by explosive atmospheres. Water based cleaning liquids containing a quantity of halogenated solvents exceeding 2 % of the volume are considered hazardous with respect to the creation of a potentially explosive atmosphere. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1. This European Standard does not apply to cleaning machines for industrial items using water based cleaning liquids which are manufactured before the publication of this standard by CEN.

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

BS EN 12921-4:2005 使用液体或蒸气的工业设备的表面清洁和预处理机器.使用卤化溶剂的机械的安全

This European Standard specifies the significant hazards of machines for surface cleaning and pre-treatment - in the following called "cleaning machines" - of industrial items using halogenated solvents, either pure or as a mixture. This European Standard applies together with EN 12921-1:2005. Both parts together cover all significant hazards relevant for cleaning machines of industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements specified in Part 4 take precedence over the respective requirements in EN 12921-1:2005. This European Standard applies together with EN 12921-3 in case of release of flammable vapours from the cleaning liquids. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1:2005. This European Standard is not applicable to cleaning machines which are manufactured before the publication of this European Standard by CEN.

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Safety of machines using halogenated solvents

BS EN 12921-4:2005+A1:2008 使用液体和蒸气的工业设备的表面清洁和预处理机器 第4部分 使用卤化溶剂的机器的安全性

This European Standard specifies the significant hazards of machines for surface cleaning and pre-treatment – in the following called "cleaning machines" – of industrial items using halogenated solvents, either pure or as a mixture. This European Standard applies together with EN 12921-1:2005. Both parts together cover all significant hazards relevant for cleaning machines of industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements specified in Part 4 take precedence over the respective requirements in EN 12921-1:2005. This European Standard applies together with EN 12921-3 in case of release of flammable vapours from the cleaning liquids. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1:2005. This European Standard is not applicable to cleaning machines which are manufactured before the publication of this European Standard by CEN.

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

BS EN 12921-3:2005 使用液体或蒸气的工业设备的表面清洁和预处理机器.使用易燃清洁液体的机器的安全性

This European Standard deals with the significant hazards of machines for surface cleaning and pre-treatment - in the following called "cleaning machines" - of industrial items using flammable cleaning liquids or a mixture of cleaning liquids, even in emulsion form, which can potentially create, even temporarily, a condition of flammability. This European Standard applies in combination with EN 12921-1. Both parts together cover all significant hazards relevant for cleaning machines of industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements specified in this European Standard take precedence over the respective requirements of EN 12921-1. To the extend of this document the terms combustible materials and flammable substance and explosive are equivalently used. NOTE 1 The condition of flammability can be generated only when molecules of the fluid are in intimate contact with oxygen from the air. Ignition is possible when: the fluid generates a concentration of vapour in air, or: the flammable fluid is present as a suspension of fine droplets in air (aerosol). NOTE 2 In practice, fires and explosions differ by the size and intensity of the reaction, and by the instantaneous effects on the environment. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1. This European Standard is not applicable to cleaning machines of industrial items using flammable cleaning liquids which are manufactured before the publication of this European Standard by CEN.

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Safety of machines using flammable cleaning liquids

KS B ISO 11086:2005 燃气轮机.词汇

이 규격은 가스 터빈과 관련된 용어와 정의에 관한 것으로서 일반적인 연소 시스템을 사용하는

Gas turbines-Vocabulary

KS B ISO 11042-2:2005 燃气轮机.废气排放.第2部分:排放的自动监测

이 규격은 범위 및 시간 한계 이상의 측정을 계속적으로 이용하기 위한 설비의 선택과 작동을

Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring

KS B ISO 13091-2:2004 机械振动.评定神经官能紊乱用振动感知阈值.第2部分:指尖测量分析和解释

이 규격은 진동 촉감 인지 한계 및 한계 변동을 분석하고 해석하기 위한 방법과 절차에

Mechanical vibration-Vibrotactile perception thresholds for the assessment of nerve dysfunction-Part 2:Analysis and interpretation of measurements at the fingertips

BS EN 12215:2004 涂覆设备.有机液体涂覆材料喷洒室.安全要求

This document is applicable to spray booths as well as multizone spray booths for the application of organic liquid coating materials (paints, varnishes....), and deals with all significant hazards relevant to spray booths or multizone spray booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). A spray booth is an assembly of the following linked components: forced ventilation by one or more fans; dry air filtering and/or wet air washing systems, measuring and control devices, ventilation air heating system, automatic fire extinguishing equipment, warning devices, electrical apparatus, joined together within or at a partially or totally enclosed structure (limited by walls, called space) for the controlled processing of spray application of organic liquid coating material. NOTE 1 Spray booths are classified in annex G. This standard describes methods of verification of safety measures, information labels to be affixed to the spray booth and minimum usage requirements contained within the operators handbook. This standard does not cover: — spraying areas (spaces for application of organic liquid coating materials which are limited only by one side wall used for extraction of exhaust ventilation). — combined spray booths according to definition given in 3.2; NOTE 2 See prEN 13355. — the limiting walls of spray booths if they are constituent parts of a building are not to be considered part of the machinery assembly; — the workroom or building used for the spraying of large size items (example: air-liner); — spraying equipment used in spray booths which is covered by EN 1953, EN 50050, and EN 50176. — Spray booths which are part of complex installations. NOTE 3 complex installations may include additional hazards. This standard is not applicable to spray boots which are manufactured before the date of publication of this standard by CEN.

Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements

KS B ISO 1100-2:2003 液体比重测定法.明渠水流量测量.第2部分:水位流量关系的确定

이 규격은 관측소의 수위 유량 관계를 결정하는 방법을 규정한다. 이 규격에서 요하는 정

Measurement of liquid flow in open channels-Part 2:Determination of the stage-discharge relation

KS B 6110-2003 工业用燃烧炉安全通则

이 규격은 액체 및 기체 연료를 사용하는 금속 압연 가열로, 단조 가열로, 금속용 열처

General safety code for industrial combustion furnaces

KS B ISO 11001-4:2002 农业轮式拖拉机和机具.三点悬挂挂接器.第4部分:母线联络开关

이 규격은 ISO 730-1에 의한 3점 지지 장치가 설치된 농업용 차륜형 트랙터의 후방에

Agricultural wheeled tractors and implements－Three－point hitch couplers－Part 4：Bar coupler

KS B 4118-2002 锻压机用圆冲孔

이 규격은 프레스 금형용 둥근 펀치(이하 둥근 펀치라 한다.) 중 호칭 치수 4∼25의 것

Round punches for press dies

KS B 4121-2002 压力机模具用卷簧

이 규격은 프레스에 사용하는 둥근선 코일 스프링 및 평평한선 코일 스프링(이하 스프링이라

Coiled springs for press dies

KS B ISO 11001-3:2002 农业轮式拖拉机和机具.三点挂钩式耦合器.第3部分:链式耦合器

Agricultural wheeled tractors and implements -- Three--point hitch couplers -- Part 3: Link coupler

KS B ISO 11001-2:2002 农业轮式拖拉机和机具.三点悬挂挂接器.第2部分:A型框架连接器

이 규격은 KS B ISO 730-1 또는 ISO 8759-2에 따라 3점 자유 링크 히치

Agricultural wheeled tractors and implements-Three-point hitch couplers-Part 2:A-frame coupler