J60 通用加工机械与设备综合 标准查询与下载

KS B ISO 11001-1:2002 农业轮式拖拉机和机具.三点悬挂挂接器.第1部分:U型框架连接器

이 규격은 KS B ISO 730-1 또는 ISO 8759-2에 따라 3점 자유 링크 히치

Agricultural wheeled tractors and implements－Three－point hitch couplers－Part 1：U－frame coupler

KS B 4063-2001 直边形机械压力机作业面的尺寸

? ??? ?? ??? 400 kN?? 20 000 kN??? ?? ??? ???? ???

Straight-sided power presses-Characteristics and dimensions

KS B ISO 13090-1:2001 机械振动与冲击.人体全身振动环境的测量规范.人体全身振动暴露的舒适性降低界限和评估准则

이 규격은 기계적 진동과 반복 충격에 피폭되는 피시험자를 대상으로 실험실에서의 시험 수행과

Mechanical vibration and shock-Guidance on safety aspects of tests and experiments with people-Part 1:Exposure to whole-body mechanical vibration and repeated shock

KS B 4120-2001 锻压机敲空装置

이 장치는 드로잉, 포밍 및 벤딩 작업을 할 때, 또는 제품을 녹아웃할 때 프레스 기계에

Knock-out equipment for press dies

JB/T 8695-1998 无气喷涂机

本标准规定了各种涂料、树脂、溶剂、胶粘剂等特殊介质喷涂或压送用无气喷涂机的技术要求、试验方法、检验规则、标志、包装、运输和储存等要求。 本标准适用于气动型、电动型、内燃机等动力源驱动的无气喷涂机。

Airless spray unit

JB/T 8475-1996 单螺旋锥形混合机

本标准是根据国内、外公司的样本、技术资料，在分析国内生产、设计和使用单位的具体情况的基础上制订的。 本标准规定了单螺旋锥形混合机的分类、技术要求、检验、试验、标志、包装及贮运等要求。 本标准适用于固-固、固-液物料的单螺旋锥形混合机。

Simple helix cone-type mixers

BOCA CHAPTER 6 NPMC-1996 机械和电气要求

The provisions requiring that the excavation left when an unfit structure has been removed be filled in is an obvious, but often neglected means of protecting the public health and safety.

Mechanical and Electrical Requirements

BOCA CHAPTER 6 NPMC-1993 机械和电气要求

APPENDIX A SYSTEM LAYOUT ILLUSTRATIONS

Mechanical and Electrical Requirements

BOCA CHAPTER 4 NMC COMM-1993 机械设备

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Mechanical Equipment

BOCA CHAPTER 4 NMC-1993 机械设备

The following is a listing of the standards referenced in this code, the effective date of the standard, the promulgating agency of the standard and the section(s) of this code that refer to the standard.

Mechanical Equipment

BOCA CHAPTER 6 NPMC COMM-1993 机械和电气要求

This eleventh edition presents the code as originally issued, with changes approved through 1989, and with certain editorial changes made to maintain the sequence of the code, to standardize the format of all 1990 BOCA National Codes, and to update the

Mechanical and Electrical Requirements

KS B 4100-1990 铸造用壳型造型机试验及测试方法

이 규격은 열경화성 수지를 점결제로서 사용하여 셸주형을 만들기 위한 취입식 또는 낙하식의

Test Code for Performance and Accuracy of Shell Moulding Machines

BOCA ARTICLE 25 NBC-1990 机械设备及系统.第11版

It shall be unlawful to interfere with, attempt to interfere with, conspire to interfere with, obstruct or restrict the mobility of or block the path of travel of any fire department emergency vehicle in any way, or to interfere with, attempt to inter

Mechanical Equipment and Systems Eleventh Edition

BOCA ARTICLE 13 NMC-1990 机械制冷.第7版

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Mechanical Refrigeration Seventh Edition

BOCA ARTICLE 6 NPMC-1990 机械和电气的要求.第3版

A person shall not willfully fail or refuse to comply with any lawful order or direction of the fire prevention code officiai or to interfere with the compliance attempts of another individual.

Mechanical and Electrical Requirements Third Edition

BOCA ARTICLE 4 NMC-1990 机械设备.第7版

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Mechanical Equipment Seventh Edition

JIS B 6511:1989 镂铣机的试验及检验方法

Test methods for performance and accuracy of routing machines

JIS B 6510:1989 螺旋造型机性能和精度的试验方法

この規格は，JIS B 0114(木材加工機械の名称に関する用語)の番号6321に規定する単軸面取り盤及び番号6322に規定する複軸面取り盤(以下，これらを総称して面取ワ盤という。)のうち，単軸面取り盤については有効切削高さがl00mm以下の面取り盤，複軸面取り盤につしもては有効切削高さが100 mm以下で主軸センタ間の原離が100 mm以上680 mm以下の面取り盤の機能，運転性能及び剛性に関する試験方法並びに静的精度及び工作精度の検査方決について規定する。

Test methods for performance and accuracy of spindle moulding machines

KS B 4088-1985 锻锤用模具坯料

? ??? ??? ??? ???? ?? ??? ??? ????.

Die Blocks for Closed &##8211; Die Hammer Forging

KS B 0050-1977 数控机械用符号

이 규격은 수치 제어 기계에 사용하는 테이프의 부호에 대하여 규정한다.

Code for Numerical Control of machines