J60 通用加工机械与设备综合 标准查询与下载

EN 454:2014 食品加工机械.行星搅拌器.安全和卫生要求

This European Standard specifies safety and hygiene requirements for the design and manufacture of fixed bowl planetary mixers with a tool having a planetary movement by using two parallel axes. The capacity of the bowl is greater than or equal to 5 L1) and less than or equal to 200 L. These planetary mixers are used separately in the food industry and shops (catering, bakery, pizza, pastry and confectionary industry) for mixing, kneading and emulsifying/whipping food products (e. g. cocoa, flour, sugar, oils and fat, eggs, and other ingredients). These machines are fed by hand and sometimes during operation without stopping the machine. Processing is carried out in cycles of variable duration. It can be either manually or automatically controlled, in individual cycles or on a cycle repeat basis, etc. This European Standard deals with all significant hazards, hazardous situations and events relevant to the transport, installation, adjustment, operation, cleaning, maintenance, dismantling, disassembling and scrapping of planetary mixers, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer(see Clause 4). This European Standard does not deal with the following machines:- catering attachment for planetary mixers (see EN 12851); - continuously fed machines; - dough mixers (see EN 453); - whipping mixers which contain no parallel axes; - stirring machines; - experimental and testing machines under development by the manufacturers; - machines used in other industry, for example: meat industry, candy industry, pharmaceutical industry, chemical industry; - domestic appliances. This European Standard is not applicable to machines which are manufactured before its date of publication as a European standard.

Food processing machinery - Planetary mixers - Safety and hygiene requirements

EN 453:2014 食品加工机械.揉面机.安全性和卫生要求

This European Standard specifies safety and hygiene requirements for the design and manufacture of dough mixers with rotating bowls of capacity greater than or equal to 5 L and less than or equal to 500 L. These dough mixers are used separately or in a line in the food industry and shops (pastry-making, bakeries, confectionery, etc.) for manufacturing of dough by mixing flour, water and other ingredients. These machines can be fed by hand or mechanically. These machines are sometimes used in other industries (e. g. pharmaceutical industry, chemical industry, printing), but hazards related to these uses are not dealt with in this standard. This European Standard deals with all significant hazards, hazardous situations and events relevant to the transport, installation, adjustment, operation, cleaning, maintenance, dismantling, disassembling and scrapping of dough mixers, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not deal with the following machines: - planetary mixers (see EN 454); - continuously fed machines; - mixers with stationary vertical bowls; - experimental and testing machines under development by the manufacturer; - domestic appliances; - automatic loading and unloading devices. This European Standard is not applicable to machines which are manufactured before its date of publication as a European Standard.

Food processing machinery - Dough mixers - Safety and hygiene requirements

EN 415-1:2014 包装机的安全.第1部分:包装机及其相关设备的术语和分类

This European Standard defines the field of packaging machines. The machines defined fall within the following general groups:- filling machines; - closing machines; - labelling, decorating and coding machines; - cleaning, sterilizing, cooling and drying machines; - fill and seal machines; - inspection machines; - container and packaging component handling machines; - form, fill and seal machines; - carton erecting, carton closing and cartoning machines; - wrapping machines; - group or secondary packaging machines; - palletizers, depalletizers and ancillary equipment; - pallet wrapping machines; - strapping machines. This part of EN 415 indicates the relevant machine specific part of EN 415, or another relevant standard, where safety requirements for dealing with the hazards associated with these machines can be found.

Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment

EN 415-10:2014 包装机的安全性.第10部分:通用要求

This European Standard gives general requirements for packaging machines which are defined in the scope of EN 415-1 or are in the scope of another relevant machine specific part of EN 415. When used together with a relevant machine specific part of EN 415, it gives the requirements for that specific type of machine. This document deals with safety requirements and their verification for design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of packaging machines when used as intended and under the conditions of misuse foreseeable by a manufacturer. The extent to which hazards, hazardous situations and events are covered is indicated in Clause 4. The hazards on a specific machine can vary depending on its working principle; the type, size and mass of the product; the packaging material; auxiliary equipment attached to the machine and the environment in which the machine is used. If the machine presents hazards that are not dealt with in this standard, the manufacturer should assess these hazards by using the principles detailed in EN ISO 12100:2010. Such deviations or additions are outside the scope of this standard. Exclusions This European Standard is not applicable to the following:- machines that were manufactured before the date of publication of this document by CEN. This standard does not consider the following; - the risk resulting from the use of machines in public accessed areas. NOTE For machines used in public accessed areas different or additional requirements can apply. It is the responsibility of the manufacturer to identify such additional risks, which are outside the scope of this standard or such deviating risks which arise from this specific use, and provide suitable protective measures in accordance with EN ISO 12100; - the use of packaging machines in potentially explosive atmospheres; - specific health, safety or hygiene hazards associated with the products that may be handled by the machines, but does

Safety of packaging machines - Part 10: General Requirements

JIS B 9690:2013 移动式升降工作台.设计,计算,安全性要求和试验方法

Mobile elevating work platforms.Design, calculations, safety requirements and test methods

KS B ISO 13091-1:2013 机械振动.评定神经官能紊乱用振动感知阈值.第1部分:指尖测量法

이 표준은 손가락 끝에서의 진동 감촉 감지 역치(VPT)의 측정 방법과 측정 수행 절차 및 결과 보고사항에 대하여 규정한다.이 표준에서는 SAI, FAI, FAII로 분류되어 있는 감각 수용기 분류군에서 손가락 끝에 전달된 감지역치(경계값)를 얻기 위한 측정 방법을 정의한다. 이 방법은 건강한 사람이나 질병을 앓고 있는사람에게 적용할 수 있으며 임상 평가와 검사 목적으로 쓰일 수 있다.진동 감촉 감지 역치(경계값)가 변동하는 임시 측정이나 손가락 끝이 아닌 신체의 다른 부위의측정은 이 표준의 적용범위를 벗어난다.

Mechanical vibration-Vibrotactile perception thresholds for the assessment of nerve dysfunction-Part 1:Methods of measurement at the fingertips

EN 12750:2013 木工机械安全.四边成型机

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4, which are relevant to stationary four sided moulding machines with a maximum working width of 350 mm and a maximum speed of the integrated work-piece feed of 200 m/min, with electrical and/or electronic control system, hereafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where these are covered with plastic laminate or edgings when they are used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse of the machine (see 6.3 c)). For the definition of a stationary machine, see 3.22. This European Standard deals also with hazards relating to the following optional work units: universal spindle; glass bead cutting unit. This European Standard is not applicable to machines designed for machining logs which have not previously been machined. This European Standard does not deal with any hazards relating to: a) in-feed devices (magazines, hoppers, etc.); NOTE For mechanical in-feed devices which also prevent access to the in-feed opening, see 5.3.7.2. b) the combination of single machines with any other machine as part of a line; c) out-feed devices (e. g. mechanical handling systems) except for hazards related to ejection from the machine due to climb cutting. This European Standard is not applicable to four sided moulding machines which are manufactured before the date of its publication as EN.

Safety of woodworking machines - Four sided moulding machines

NF C23-577/A1*NF EN 50177/A1:2013 可燃性的涂层粉末固定式静电应用设备.安全性要求

Stationary electrostatic application equipment for ignitable coating powders - Safety requirements

KS B ISO 11090-2:2012 机床.发电加工机检查条件.术语及正确精密度检查.第2部分:双柱机(滑动头和十字工作台型)

이 표준은 KS B ISO 230-1과 KS B ISO 230-2에 기초하여 일반적인 정확

Machine tools-Test conditions for die sinking electro-discharge machines(EDM)-Terminology and testing of accuracy-Part 2:Two column machines(slide-head type and cross-slide table type)

KS B 4109-2012 机床安全规范

? ??? ??????? ??? ???? ? ?? ??? ???? ?? ?? ?? ? ??

general code of safety for machine tools & other machineries

KS B 4092-2012 热压机.测试及监测方法

? ??? ??? ?? 1 800 mm×900 mm×35 mm ??, 4 350 mm×1

Hot presses-Test and inspection methods

KS B ISO 11090-1:2012 机床.发电加工机检查条件.术语及正确精密度检查.第1部分:单立柱机床(十字型和固定工作台型)

이 표준은 KS B ISO 230-1과 KS B ISO 230-2에 기초하여 일반적인 정확

Machine tools-Test conditions for die sinking electro-discharge machines(EDM)-Terminology and testing of accuracy-Part 1:Single column machines (cross slide table type and fixed table type)

KS B ISO 13041-6:2012 数控车床和车削中心检验条件.第6部分:完成试样的精度

이 표준은 KS B ISO 230-1을 기초로 하여 정삭 조건에서 실시하는 표준 시험편의

Test conditions for numerically controlled turning machines and turning centres-Part 6:Accuracy of a finished test piece

KS B ISO 13041-5:2012 数控车床和车削中心检验条件.第5部分:移送、速度和插补精度

이 표준은 KS B ISO 230-1을 기초로 하여 수치제어 선반과 터닝 센터의 스핀들 속

Test conditions for numerically controlled turning machines and turning centres-Part 5:Accuracy of feeds, speeds and interpolations

KS B ISO 13041-3:2012 数控车床和车削中心检验条件.第3部分:倒立式的夹具主轴的机床几何检验

이 표준은 KS B ISO 230-1 및 KS B ISO 230-7을 기초로 하여 역 수직

Test conditions for numerically controlled turning machines and turning centres-Part 3:Geometric tests for machines with inverted vertical workholding spindles

KS B ISO 13041-2:2012 数控车床和车削中心检验条件.第2部分:垂直主轴的加工物固定机床几何精度检验

이 표준은 KS B ISO 230-1 및 KS B ISO 230-7을 기초로 하여, 수직

Test conditions for numerically controlled turning machines and turning centres-Part 2:Geometric tests for machines with a vertical workholding spindles

ANSI/IAPMO UMC1-2012 统一机械规范

Uniform Mechanical Code

DB34/T 1546-2011 蒸压釜定期检验规程

本规程适用于建材行业用尽端式和贯通式蒸压釜的定期检验。

Periodical Inspection Regulation for Still Kettle

DIN EN 12621:2011 压力下涂层材料的供应和循环用机器.安全性要求;德文版本EN 12621-2006+A1-2010

This European standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure - in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless.

Machinery for the supply and circulation of coating materials under pressure - Safety requirements; German version EN 12621:2006+A1:2010

DB37/T 1754-2010 生物质压块成型设备通用技术条件

General technical requirements for biomass briquetting equipment