K10 电工材料和通用零件综合 标准查询与下载

BS EN 61788-8:2010 超导性.交流电损耗测量.用拾波线圈法在液氮温度下测量暴露于横向交变磁场中超导圆导线的交流电总损耗量

Superconductivity. AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method

BS EN 61788-14:2010 超导性.第14部分:超导电力装置.电力超导装置用电流引线设计性能试验的一般要求

This part of IEC 61788 provides general requirements for characteristic tests of conventional as well as superconducting current leads to be used for powering superconducting equipment.

Superconductivity. Part 14: Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices

BS EN 61360-1:2010 电气部件用带相关分类图的标准数据元素类型.定义.原则和方法

This part of IEC 61360 provides a firm basis for the clear and unambiguous definition of characteristic properties (data element types) of all elements of electrotechnical systems from basic components to sub-assemblies and full systems. Although originally conceived in the context of providing a basis for the exchange of information on electric/electronic components, the principles and methods of this standard may be used in areas outside the original conception such as assemblies of components and electrotechnical systems and subsystems. In addition, this standard provides for establishing a classification hierarchy and the allocation of applicable and relevant properties to each of the classes so established in order to describe fully the characteristics of objects belonging to that class. Use of this standard facilitates the exchange of data describing electrotechnical systems through a defined structure for the information to be exchanged in a computer-sensible form. Each property to be exchanged will have an unambiguously defined meaning and consistent naming, where relevant a defined value list, a prescribed format and defined units of measure for all quantitative values. There is also provision for: – control of changes to definitions of the properties through version and revision numbers; – inclusion of notes and remarks to clarify and help in the application of the definitions; – indication of the sources of definitions and value lists; – associated figures and formulae.

Standard data elements types with associated classification scheme for electric items - Definitions - Principles and methods

JIS H 7307:2010 超导性.第7部分:电特性测量.微波频率下超导体的表面电阻

This Standard describes measurement of the surface resistance of superconductors at microwave frequencies by the standard two-resonator method.

Superconductivity -- Part 7: Electronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies

ANSI/UL 6-2010 电气刚性金属导管的安全性标准.钢

Proposal dated 9-3-2010 to clarify requirements for the use of two or more primary corrosion protection systems. The revision will document requirements for evaluating multiple coatings as the primary coating.

Standard for Safety for Electrical Rigid Metal Conduit - Steel

ANSI/UL 44-2010 热固性绝缘电线和电缆的安全性标准

Deletion of Numerous Requirements Due to Publication of UL 2556; Deletion of Requirements for Lead-Alloy Conductors; Revised Markings Requirements for Aluminum Conductors, Clarification of Country-Specific Markings, and New Marking for Cables not Intended for Outdoor Use; Revision to Mandrel Diameter and Related Testing Requirements; Reinstatement of Previously Deleted Requirements for Thickness Overall Jacket Thickness on Deep Well Pump Cables; Clarification to Tables for Several RW-Type Cables.

Standard for Safety for Thermoset-Insulated Wires and Cables

ASTM F366-10 固定插脚和固定线缆的标准规范

1.1 This specification covers functional dimensions for fixation pins and wires. 1.2 In recognition of many broad and varied uses of such pins and wires, many options are included. A variety, but not necessarily all, of the options are illustrated in Figs. 1-3. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Fixation Pins and Wires

ANSI/UL 44A-2010 热固性-绝缘线和线缆用安全性标准

Major Revisions to UL 44 Based on Publication of UL 2556, and other Revised Construction, Performance, and Marking Requirements

Standard for Safety for Thermoset-Insulated Wires and Cables

ASTM B896-10e1 电导体材料连接特性评估的标准试验方法

These test methods develop comparative information useful for the design of stationary contacts for wire, cable, and other conductors. These test methods produce results, which are free of the influence of arbitrary connection systems. The influence of conductor surface pretreatments and platings can be evaluated by these test methods. The influence of environmental factors, such as high temperature and corrosive environment can be evaluated by these test methods. The results obtained by these test methods provide guidance on connection system design parameters, such as contact force and gas tightness requirements.1.1 These test methods define procedures for the relative characterization of conductor material connectability on the basis of measurements of parameters important to the design and performance of electrical contacts and connections to and with such conductors for both power and signal applications. 1.2 The parameters measured are contact resistance as a function of contact force, fretting sensitivity, and compressive relaxation. 1.3 Provision is made for measurement of the connectability parameters at elevated temperature, or corrosive ambient, or both, as may be required for evaluation for particular applications. 1.4 These test methods, using standardized specimen geometry and procedures, are applicable to conductor materials as employed in an electrical system and may be adapted for evaluation of connectability of materials in the form of actual connection system components. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials

ANSI/UL 62-2010 柔性索线和电缆用安全性标准(提案日期 6/26/09)

This standard specifies the requirements for flexible cords, elevator cables, and hoistway cables rated 600 V maximum and intended for use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I and CAN/CSA-C22.2 No. 0, General Requirements - Canadian Electrical Code, Part II, in Canada, NOM-001-SEDE, La Norma de Instalaciones Electricas (Mexican Electrical Code [MEC]), in Mexico, and NFPA 70, National Electrical Code (NEC), in the United States.

Standard for Safety for Flexible Cords and Cables (Proposal dated 6/26/09)

KS C 8431-2009 硬质塑料导管

이 표준은 전기 배선에서 전선을 보호하는 데 사용하는 경질 폴리염화비닐 전선관에 대하여 규

Rigid unplasticized polyvinyl chloride(UPVC) conduits

KS C 6111-6-2009 超导电力电缆的直流临界电流测量方法

이 표준은 초전도 도체로 구성된 초전도 전력케이블에 대한 직류 임계전류의 시험방법에 적용

Measurement method for the DC critical current of superconducting power cables

SANS 60332-3-25:2009 着火条件下电缆和光缆的测试.第3-25部分:垂直安装胶合线或电缆的垂直火焰蔓延试验-D类

Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. Relates to small cables of overall diameter 12 mm or smaller installed on the test ladde

Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D

SANS 60332-3-23:2009 着火条件下电缆和光缆的测试.第3-23部分:垂直安装胶合线或电缆的垂直火焰蔓延试验.B类

Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. Relates to cables installed on the test ladder to achieve a nominal total volume of non-

Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B

SANS 60332-3-22:2009 着火条件下电缆和光缆的测试.第3-22部分:垂直安装胶合线或电缆的垂直火焰蔓延试验.A类

Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. Relates to cables installed on the test ladder to achieve a nominal total volume of non-

Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A

SANS 60332-3-24:2009 着火条件下电缆和光缆的测试.第3-24部分:垂直安装胶合线或电缆的垂直火焰蔓延试验.C类

Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. Relates to cables installed on the test ladder to achieve a nominal total volume of non-

Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C

JEM 1136-2009 用于开关设备和控制设备总成的模拟母线

Mimic bus for switchgear and controlgear assemblies

SANS 60332-3-10:2009 着火条件下电缆和光缆的测试.第3-10部分:垂直安装胶合线或电缆的垂直火焰蔓延试验.仪器

Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. Details the apparatus and its arrangement and calibration.

Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

SN/T 2268-2009 漆包线中有机挥发物含量的测定.顶空气相色谱-质谱法

本标准规定了顶空气相色谱-质谱法测定漆包线中甲苯、乙苯、邻二甲苯、间二甲苯、对二甲苯、苯乙烯、苯酚、2-甲基苯酚、3-甲基苯酚、4-甲基苯酚、2，5-二甲基苯酚、3，4-二甲基苯酚、3，5-二甲基苯酚13种有机挥发物的方法。 本标准适用于漆包线中甲苯等13种有机挥发物的测定。

Determination of organic volatiles in enameled wire.Headspace.GC-MS method

AS 1154.3:2009 架空导线用绝缘体和导体配件.第3部分:螺旋状配件的性能和一般要求

This Standard specifies performance and general requirements for helical fittings for use on overhead electric power lines. Helical fittings for overhead lines, including OPGW and ADSS and stays, consist of sets of rods, each of which has been formed into an open helix having normally the same direction of lay as the outer strands of the conductor to which it is applied. In installation, the rods are wrapped in accordance with the manufacturer’s recommendations around a conductor, cable or stay having a diameter somewhat greater than the internal diameter of the fitting.

Insulator and conductor fittings for overhead power lines Part 3: Performance and general requirements for helical fittings