K51 电站设备自动化装置 标准查询与下载

DL/T 1199-2013 电测技术监督规程

本标准规定了电测技术监督的基本原则、监督范围、监督内容和相关的技术管理要求。本标准适用于电网企业、发电企业、电力建设企业以及重要电力用户的电测技术监督。

Technical supervision code of electrical measuring

DL/T 721-2013 配电自动化远方终端

本标准规定了配电自动化远方终端及子站的技术要求、功能规范、试验方法和检验规则等。本标准适用于10kV及以上配电网配电自动化远方终端(以下简称配电自动化终端)及子站的生产、使用、检测和验收。

Remote terminal unit of distribution automation

DL/T 1237-2013 1000kV继电保护及电网安全自动装置检验规程

本规程规定了交流1000kV电压等级继电保护和电网安全自动装置及其二次回路接线(以下简称继电保护)的检验类型、周期、内容及要求。本规程适用于1000kV电压等级继电保护的检验工作,1000kV变电站内其他电压等级设备参照本规程执行。

Testing regulations on AC 1000kV protection and security automatic equipments

EN ISO 21179:2013 轻型输送带.轻型输送带运行中产生的静电场的测定（ISO 21179:2013）

Diese Internationale Norm legt ein Prufverfahren fur die Bestimmung des von einem laufenden, leichten Fordergurt erzeugten elektrischen Feldes nach ISO 21183-1 fest. Diese dynamische Prufung ist erforderlich, weil das antistatische Verhalten von leichten Fordergurten nicht immer ausreichend durch Messungen der elektrischen Widerstande nach ISO 21178 beschrieben werden kann.

Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt

ASME POM 101-2013 性能相关的停机检查

This Standard provides guidelines for equipment inspections that are designed to ultimately improve the thermal performance or efficiency of the power plant. By following these guidelines, many issues identified during an inspection, upon resolution, will also improve the reliability of the plant. This Standard provides guidelines for equipment inspections of power plants using fossil fuels during shutdown or outage periods. Some portions of this document may be applicable to other types of power plants. This Standard contains a series of sections, each pertaining to specific equipment and/or systems commonly found in power plants. Internal inspections covered in this document are intended to take place when the equipment is in out of service. Each section of this standard can be used independently, and includes recommendations on what to look for during the inspection.

Performance-Related Outage Inspections

ASME RAM-1-2013 电厂设备和系统的可靠性,实用性,以及可维护性

This Standard provides the requirements to establish a RAM program for any power-generation facility. The program process includes the establishment of RAM goals and requirements for design, construction and commissioning, and operations. This Standard identifies the required RAM program elements and responsibilities.

Reliability@ Availability@ and Maintainability of Equipment and Systems in Power Plants

DL/T 1163-2012 隐极发电机在线监测装置配置导则

Configuration guide of on-line monitoring equipment for cylindrical rotor generators

DL/T 295-2011 抽水蓄能机组自动控制系统技术条件

本标准规定了抽水蓄能机组自动控制系统的有关术语、基本结构、系统功能、技术要求以及文件等内容。 本标准适用于单机容量200MW及以上抽水蓄能机组自动控制系统的设计、制造和运行管理，其他容量抽水蓄能机组可参照执行。

Specification of automation control system for pumped storage power units

DB37/T 1809.7-2011 资源综合利用火力发电厂安全生产规范 第7部分：热工控制及自动化

Comprehensive Utilization of Resources Thermal Power Plant Safety Production Code Part 7: Thermal Control and Automation

DL/T 339-2010 低压变频调速装置技术条件

本标准规定了低压变频调速装置的技术要求、试验方法、检验规则及标志、包装、运输、贮存、运行与维护。 本标准适用于660V及以下电压，50Hz/60Hz三相交流电源供电的变频调速装置。

Specification for low voltage speed control device with variable frequency

ASTM D6439-11 清洁,冲洗,净化蒸汽,气体和水力发电涡轮润滑系统的标准指南

This guide is intended to aid the equipment manufacturer, installer, and turbine operator in coordinating their efforts to obtain and maintain clean lubrication and control systems. The flushing and cleaning philosophies stated in this guide are applicable to both large and small lubrication systems. Clean lubrication systems result from proper system design and good planning, execution, and communication by all involved during commissioning. No phase of these procedures should be undertaken without a thorough understanding of the possible effects of improper system preparation. The installation, cleaning, and flushing of the equipment should not be entrusted to persons lacking in experience. Because of the knowledge and specialized equipment that is required, the operator may wish to employ an outside specialist contractor for the system flushing. Review of this guide can provide guidelines for discussion with prospective contractors.< ^SCOPE: 1.1 This guide covers types of contaminants, oil purification devices, contamination monitoring, contamination control during building or refurbishing of turbine systems, lubrication system flushing, and maintenance of pure lubrication oil. 1.2 To obtain maximum operating life and reliability, or lubricants and system, it is vital that the turbine lubrication system has pure oil. This guide is intended to aid the equipment manufacturer, installer, and turbine operator in coordinating their efforts to obtain and maintain clean lubrication and control systems. These systems may be on land or marine turbine generators and propulsion and mechanical drive equipment. This guide is generalized due to variations in the type of equipment, builder''s practices, and operating conditions. 1.3 This guide primarily addresses petroleum based lubricating oil. For systems using nonpetroleum based fluids, this guide may not be appropriate. For nonpetroleum products, consult the equipment and fluid manufacturers. 1.4 This guide is applicable to both large and small lubrication systems. Some equipment specified herein, however, may not be appropriate for all systems. Moreover, in situations where specific guidelines and procedures are provided by the equipment manufacturer, such procedures should take precedence over the recommendations of this guide. 1.5 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

BS ISO 26382:2010 联合发电系统.规划、评估和采购用技术申报

Cogeneration systems - Technical declarations for planning, evaluation and procurement

DL/T 634.5124-2009 远动设备及系统第5-124部分:传输规约 采用标准传输协议集的IEC60870-5-121网络访问

Telecontrol equipment and systems - Part 5-124: Transmission protocols - network access for IEC60870-5-121 using standard transport profiles

DL/T 535-2009 电力负荷管理系统数据传输规约

Power load management system data transmission protocol

DL/T 1100-2009 电力系统的时间同步系统 第1部分:技术规范

Time synchronism systems of power system - Part1: Technical specifications

DL/T 1098-2009 间隔棒技术条件和试验方法

本标准规定了架空线路间隔棒的技术条件和试验方法。 本标准适用于交、直流架空线路双分裂及以上的多分裂导线所用的刚性间隔棒、柔性间隔棒及阻尼间隔棒,但不适用于相间间隔棒和跳线间隔棒。

Requirements and tests for overhead line spacers

DL/T 1099-2009 防振锤技术条件和试验方法

本标准规定了架空线路用防振锤的技术条件和试验方法。 本标准适用于架空线路上的斯托克布里奇型防振锤。对于其他类型的防振锤,需方可以根据本标准的部分条款提出相应的要求。

Technical requirements and tests for damper

DL/T 1101-2009 35kV～110kV变电站自动化系统验收规范

本标准规定了35kV～110kV 电压等级变电站自动化系统验收的管理、验收流程、验收内容和要求等。 本标准适用于35kV～110kV 电压等级变电站自动化系统新建、改造工程的建设和验收工作。本规范可作为编制变电站自动化系统招标文件技术规范的依据。

Acceptance specification for 35kV～110kV substation automation system

DL/T 1145-2009 绝缘工具柜

本标准规定了绝缘工具柜的分类、一般要求、功能要求、试验方法、检验规则、标识、包装、运输与贮存等。 本标准适用于贮存输、配、变电检修及带电作业用绝缘工器具、安全工器具的专用柜（箱）等设备，同时适用于那些为特殊使用条件而设计的工器具贮存设备。

Cabinet for insulating tool

DL/T 1120-2009 水轮机调节系统自动测试及实时仿真装置技术条件

本标准规定了水轮机调节系统自动测试及实时仿真装置(以下简称装置)的基本技术条件。该装置可由水轮机调节系统自动测试系统(以下简称测试系统)和水轮机实时仿真系统(以下简称仿真系统)构成。 本标准适用于水电站混流式和轴流转浆式水轮机调节系统自动测试与实时仿真装置的设计制造。符合本标准规定的水轮机调速系统自动测试及实时仿真装置,可用于水轮机调节系统的出厂验收、现场验收测试。

Specification of autotest and real-time simulation to for hydraulic turbine governor