K51 电站设备自动化装置 标准查询与下载

BS EN 45510-2-4:2000 发电站设备采购指南.电气设备.高功率静态转换器.高功率静态转换器

This standard gives guidance on writing the technical specification for the procurement of static a.c. and d.c. high power convertors for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers each type of power converter, i.e. rectifier, inverter, static excitation system, conversion of a.c. to a.c./d.c. to d.c. and switching, for the purpose of changing and/or controlling one or more characteristics. This type of equipment is used for many applications such as motor drives and actuators, e.g. variable frequency starting equipment, a.c. and d.c. power supplies for computers and instrumentation, in chemical process plant, e.g. rectifiers for electrolysis in hydrogen production, in mechanical plant, e.g. electrostatic precipitators, etc. For additional, or specific, requirements for batteries, battery chargers or uninterruptible power supplies (UPS) refer to the relevant guides in this series. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that - the equipment type and capacity interfaces correctly with other elements of the systems, - predicted performance is achieved, - ancillary equipment is property sized, - reliability, availability and safety requirements are achieved, - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover - any commercial, contractual or legal issues which are normally in separate parts of an enquiry, - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Electrical equipment - High power static convertors

BS EN 45510-4-8:2000 发电站设备采购指南.锅炉辅助设备.尘埃处理装置.第8节:尘埃处理

This standard gives guidance on writing the technical specification for the procurement of equipment for dust handling associated with coal fired steam generating plant for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers the devices for pneumatic, mechanical and hydraulic conveying of different design. Pneumatic conveying systems use compressed air or inert gas in different ways. Air activated gravity flow is used in the air slide. Other pneumatic systems use gas as conveying medium for the dust in pipelines; those are differentiated by the velocity of conveyance. Dilute phase conveying systems also known as high-velocity conveying systems include: - ejectors; - dust pumps; - elevators (airlift). Dense phase conveying systems, using pressure vessel conveyors as transmitters include: - plug conveyors (batch conveyors); - turbulent flow conveyors. Mechanical conveyors systems for dust handling include: - belt conveyors (moistened dust); - drag link conveyors; - bucket elevators; - silo vehicles. Hydraulic conveying systems use pressurized water as conveying medium in pipelines; These include:: - slurry pumps; - ejectors. A multitude of accessories can be necessary to form a complete dust removal plant. If fly ash is to be utilized it mostly is to be kept in dry condition. In consequence the dust handling systems for this purpose are limited to pneumatic and mechanical devices or a combination of both. Hydraulic conveyance of fly ash is preferably employed in combination with hydraulic ash handling if all combustion residues are to be dumped as waste. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems such as the boiler and gas treatment plant; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment. Boiler auxiliaries. Dust handling plant. Section 8: Dust handling

JB/T 50054-1999 内燃机电站 可靠性考核评定方法

本标准规定了用内燃机驱动工频(50Hz)、中频(400Hz)、双频(50Hz、400Hz)和直流发电机的内燃机电站(含汽车电站、挂车电站、方舱电站、移动式发电机组、固定式发电机组)的可靠性考核项目、考核方式、试验方法及判定规则等。 本标准适用于0.5～3150kW的电站，60Hz电站可参照使用。

Assessment method of reliability of internal combustion engine power stations

JB/T 8185-1999 电站自动化装置.术语

　　本标准规定了电站设备自动化装置的术语。 　　本标准适用于制订标准、编写和翻译专业手册、教材及书刊使用。

Power station for automation equipment terminology

ASTM D6439-99 蒸汽叶轮机、燃气轮机和水电轮机润滑系统的清洁、冲洗和净化标准指南

1.1 To obtain maximum operating reliability and component life, it is vital that the turbine lubrication system has pure oil. This guide is intended to aid the equipment manufacturer, installer, and turbine operator in coordinating their efforts to obtain and maintain clean lubrication and control systems. These systems may be on land or marine turbine generators and propulsion and mechanical drive equipment. This guide is generalized due to variations in the type of equipment, builder''s practices, and operating conditions. 1.2 This guide covers types of contaminants, oil purification devices, contamination monitoring, contamination control during building or refurbishing of turbine systems, lubrication system flushing, and maintenance of pure lubrication oil. 1.3 This guide primarily addresses petroleum based lubricating oil. For systems using nonpetroleum based fluids, this guide may not be appropriate. For nonpetroleum products, consult the equipment and fluid manufacturers. 1.4 This guide is applicable to both large and small lubrication systems. Some equipment specified herein, however, may not be appropriate for all systems. Moreover, in situations where specific guidelines and procedures are provided by the equipment manufacturer, such procedures should take precedence over the recommendations of this guide. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

EN 45510-6-5:1999 发电站设备的采购指南.第6-5部分:涡轮辅助件.干冷却系统

This standard gives guidance on writing the technical specification for the procurement of natural draught and mechanical draught dry cooling towers, aircooled condensers and their internals for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: - water distribution system; - heat exchangers; - supporting frame and footbridges; - winter operating equipment (e.9. louvres, shutters); - fan and fan ancillaries; - noise attenuation equipment; - pipework and valves; - exhaust steam duct; - distribution ducts; - air extraction system; - condensate system. This Guide does not cover: - water cooled condensers; - cooling water pumps and associated auxiliaries; - chemical and mechanical water treatment; - civil work. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems such as - predicted performance is achieved; - ancillary equipment is properly sized; - reliabilityJ availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. condenser, cooling water supply and civil work; This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for Procurement of Power Station Equipment - Part 6-5: Turbine Auxiliaries - Dry Cooling Systems

DL/T 631-1997 模拟屏驱动器通用技术条件

General specification for mimic board driver

DL/T 630-1997 交流采样远动终端技术条件

Technical requirement for RTU with a.c.electrical quantities input,discrete sampling

DL/T 632-1997 模拟屏数字显示器通用技术条件

General specification for digital display of mimic board

ARMY MIL-DTL-53135-1996 60赫兹120/240伏10万千瓦辅助动力单元

This detail specification covers the requirements for a 10 kW Auxiliary Power Unit, 120/240 VAC6, 0 Hz, hereinafter called "APU". The APU is a power source consisting oaf self-contained engine and generator, including remote controls, capabloef producing electrical power when connected to its host's source of fuel and starting power.

AUXILARY POWER UNIT, 10 KW, 120/240 VAC, 60 HZ

SN/T 0298-1993 出口微型（12kW及以下）水力发电设备检验规程

Rules for inspection of micor hydro generatorequipments（12kW and below the 12kW）for export

STAS 6612/2-1991 制造铅笔用的矿物质．抗弯曲测定

Mines for pencils bending reslstance determination

GOST 4.429-1986 产品质量指标系统.热电站热交换设备.指标术语

Настоящий стандарт устанавливает номенклатуру показателей качества, теплообменного оборудования тепловых электростанций, отопительных

Product-quality index system. Heat-exchanging equipment of thermal power stations. Index nomenclature

GOST 4.409-1985 产品质量指标系统.内燃机发电设备及移动电站.指标术语

Настоящий стандарт устанавливает номенклатуру основных показателей качества электроагрегатов и передвижных электростанций с двигателя

Product-quality index system. Power generating sets and mobile electric power stations with internal combustion engines. Index nomenclature

IPC TM-650 5.1.422-1975 玻璃布的铬含量分析

Any Standard involving a complex technology draws material from a vast number of sources. While the principal members of the IPC Computer Aided Technology Committee are shown below, it is not possible to include all of those who assisted in the evolution of this standard. To each of them, the members of the IPC extend their gratitude.

Analysis of Glass Fabrics for Chrome Content

IPC TM-650 5.1.424-1975 玻璃布硅烷内容分析

This standard is used to describe the relationship between components (electronic, electro-mechanical, and mechanical) and the printed boards used as the major form of interconnection. Included in these descriptions are the physical characteristics of components and boards required as input to an automated assembly system.

Analysis of Glass Fabrics for Silane Content

IPC TM-650 5.1.420-1975 玻璃布的断裂强度分析(暂定)

Any Standard involving a complex technology draws material from a vast number of sources. While the principal members of the Computerized Data Format Standardization Subcommittee of the IPC Computer-Aided Technology Committee are shown below, it is not possible to include all of those who assisted in the evolution of this standard. To each of them, the members of the IPC extend their gratitude.

Analysis of Glass Fabrics for Breaking Strength; (Tentative)

KS M 3500-7-2013 利用热固性树脂水管设施用硬化非挖掘式修复管

Cured--in--place thermosetting resin tube for renovation of potable water piping system

SD 288-1988 水轮发电机组推力轴承、导轴承安装调整工艺导则

Guidelines on installation and adjustment technology of hydroelectric generating set thrust bearing and guide bearing