L13 电阻器 标准查询与下载

IEC 61051-1:2007 电子设备用压敏电阻器.第1部分:总规范

This part of IEC 61051 is applicable to varistors with symmetrical voltage-current characteristics for use in electronic equipment.

Varistors for use in electronic equipment - Part 1: Generic specification

ARMY MIL-PRF-55182 H (2)-2007 非永久性能最佳性和永久性能最佳性和空间基准普通规格薄片固定电阻器

This specification covers the general requirements for nonestablished reliability(non-ER), established reliability(ER), and space level that are hermetically or nonhermetically sealed fixed film resistors that have a high degree of stability with respect to time under severe environmental conditions.

RESISTORS, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-03018 REV A-2007 0404型负温度系数(NTC)芯片热敏电阻器

This drawing describes the requirements for a thermally sensitive die chip thermistor available in ±1 percent, ±2 percent, ±5 percent, and ±10 percent resistance tolerances. These thermistors exhibit negative temperature efficient (NTC) characteristics and are primarily intended for incorporation into epoxy/wire bond applications.

RESISTOR, THERMAL, THERMISTOR, DIE CHIP, NEGATIVE TEMPERATURE COEFFICIENT (NTC), STYLE 0404

DLA DSCC-DWG-03017 REV A-2007 0303型正温度系数(PTC)芯片热敏电阻器

This drawing describes the requirements for a thermally sensitive die chip thermistor available in ±1 percent, ±2 percent, ±5 percent, and ±10 percent resistance tolerances.

RESISTOR, THERMAL, THERMISTOR, DIE CHIP, POSITIVE TEMPERATURE COEFFICIENT (PTC) style 0303

DLA DSCC-DWG-93074 REV B-2007 NTC片状1206型热敏电阻器

This drawing describes the requirements for a thermally sensitive 0.120 x 0.060 chip resistor.

THERMISTOR, (THERMALLY SENSITIVE RESISTOR), NTC, CHIP, STYLE 1206

DLA DSCC-DWG-93073 REV D-2007 NTC片状0805型热电阻

This drawing describes the requirements for a 0.080 X 0.050, thermally sensitive, chip resistor.

RESISTOR, THERMAL, CHIP, NTC, STYLE 0805

DLA DSCC-DWG-88008 REV B-2007 固定薄膜片状含氮化钽0505型电阻器

This drawing describes the requirements for a fixed, tantalum nitride, chip resistor.

RESISTOR, CHIP, FIXED, FILM, TANTALUM NITRIDE, STYLE 0505

DLA DSCC-DWG-88009 REV E-2007 固定薄膜片状含氮化钽1505型电阻器

This drawing describes the requirements for a .10 x .05 fixed, tantalum chip, resistor.

RESISTOR, CHIP, FIXED, FILM, TANTALUM NITRIDE, STYLE 1050

DLA QPL-39035-84-2007 无线绕(调整型)可变电阻器无定制可靠性和定制可靠性一般规格

An asterisk (*) adjacent to the product listing indicates that qualified parts listed on the QPL are available through distributors authorized by the manufacturer in accordance with Military Standard MIL-STD-790. Names and addresses of the distributors are listed in the back of this QPL. This list of authorized distributors is being furnished merely as an aid in identifying authorized sources of ER parts and the responsibility for complying withcontractual provisions requiring use of such parts rests with the user of such parts. This list has been compiled from information furnished by the manufacturers of ER parts prior to release of this QPL.

RESISTORS, VARIABLE, NONWIRE WOUND (ADJUSTMENT TYPE), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-99005 REV D-2007 固定薄膜片状8插针组2012型电阻器

This revision described below has been authorized for the document listed.

RESISTOR, CHIP, FIXED, FILM, 8 PIN ARRAY, STYLE 2012

DLA MS75009 REV J (2)-2007 (功率型)后端盖组件电阻器

The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issues of MIL-PRF-26, and MIL-R-19365.

BRACKET ASSEMBLY, RESISTOR (POWER TYPE)

DLA DSCC-DWG-87105 REV C-2007 电阻网络,9-PIN SIP,多层电阻阻值,多层公差,厚层

This drawing describes the requirements for a 9-pin single in line package (SIP).

RESISTOR NETWORK, 9-PIN SIP, MULTIPLE VALUES, MULTIPLE TOLERANCES, HIGH PROFILE

DLA DSCC-DWG-87103 REV C-2007 电阻网络,9-PIN SIP,多层电阻阻值,多层公差,薄层

This drawing describes the requirements for a 9 pin single in line package (SIP).

RESISTOR NETWORK, 9-PIN SIP, MULTIPLE VALUES, MULTIPLE TOLERANCES, LOW PROFILE

DLA DSCC-DWG-87073 REV D-2007 电阻网络,固定性,胶片,8-PIN SIP,多层电阻阻值,复合图表(薄层)

This drawing describes the requirements for an 8-pin, low profile, single-in-line package (SIP), fixed, film,resistor network.

RESISTOR NETWORK, FIXED, FILM, EIGHT PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS, (LOW PROFILE)

DLA DSCC-DWG-87074 REV C-2007 电阻网络,固定性,胶片,8-PIN SIP,多层电阻阻值,复合图表(厚层)

This drawing describes the requirements for a 8-pin, high profile, single-in-line package (SIP), fixed film,resistor network.

RESISTOR NETWORK, FIXED, FILM, 8-PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS, (HIGH PROFILE)

DLA DSCC-DWG-87068 REV D-2007 电阻网络,固定性,胶片,7-PIN SIP(厚层),复合图表

This drawing describes the requirements for a 7-pin, low profile, single-in-line package (SIP), fixed film,resistor network.

RESISTOR NETWORK, FIXED, FILM, 7-PIN SIP (HIGH PROFILE), MULITPLE SCHEMATICS

DLA DSCC-DWG-87067 REV D-2007 电阻网络,固定性,胶片,7-PIN SIP(薄层),复合图表

This drawing describes the requirements for a 7-pin, low profile, single-in-line package (SIP), fixed, film, resistor network

RESISTOR NETWORK, FIXED, FILM, 7-PIN SIP (LOW PROFILE), MULTIPLE SCHEMATICS

DLA DSCC-DWG-87072 REV D-2007 电阻网络,固定性,胶片,10-PIN SIP,多层电阻阻值,复合图表,多层公差

This drawing describes the requirements for a 10-pin, single-in-line package (SIP), fixed, film, resistor network.

RESISTOR NETWORK, FIXED, FILM, 10-PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS AND MULTIPLE TOLERANCES

DLA DSCC-DWG-87071 REV D-2007 电阻网络,固定性,胶片,10-PIN SIP,多层电阻阻值,复合图表(薄层)

This drawing describes the requirements for a 10-pin, low profile, single-in-line package (SIP), fixed film, resistor network.

RESISTOR NETWORK, FIXED, FILM, 10-PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS, (LOW PROFILE)

DLA DSCC-DWG-88031 REV E-2007 固定的薄膜片状.330瓦1005型电阻器

This drawing describes the requirements for a fixed, film, .330 watt, .150 X .050 chip resistor.

RESISTOR, CHIP, FIXED, FILM, .330 WATT, STYLE 1505