L13 电阻器 标准查询与下载

BS EN 140100:2008 分规范.低功率固定薄膜电阻器

This sectional specification prescribes the preferred values for characteristics and ratings and also the inspection requirements for fixed film resistors of assessed quality. These resistors generally have wire terminations and are primarily intended to be mounted directly on to printed boards. It selects from the generic specification, EN 60115-1, the appropriate methods of test to be used in detail specifications derived from this specification. Associated with this specification are one or more blank detail specifications each referenced by an EN number. A blank detail specification which has been completed as specified in 1.2 of this specification forms a detail specification. Such detail specifications may be used for the grant of Qualification approval and for the performance of Quality conformance inspection in accordance with an established quality assessment system (e.g. the IECQ-CECC system).

Sectional Specification: Fixed low power film resistors

IEC 60738-1-1:2008 热敏电阻器.直热式阶梯函数正温度系数.第1-1部分:空白详细规范.限流的应用.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state a) whether the thermistor is insulated or non-insulated, b) the material, c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule. 1.7 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages;

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ

IEC 60738-1-3:2008 IEC 60738-1-3:热敏电阻器.直热式阶梯函数正温度系数.第1-3部分:空白详细规范.浪涌电流应用.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state: a) whether the thermistor is insulated or non-insulated; b) the material; c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule. 1.7 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages; d) methods of disposal of the packaging material.

IEC 60738-1-3: Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ

IEC 60738-1-4:2008 热敏电阻器.直热式阶梯函数正温度系数.第1-4部分:空白详细规范.敏感设备.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state: a) whether the thermistor is insulated or non-insulated; b) the material; c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule.

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ

IEC 60539-1:2008 直热式负温度系数热敏电阻器.第1部分:总规范

This part of IEC 60539 is applicable to directly heated negative temperature coefficient thermistors, typically made from transition metal oxide materials with semiconducting properties. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Directly heated negative temperature coefficient thermistors - Part 1: Generic specification

IEC 60738-1-2:2008 热敏电阻器.直热式阶梯函数正温度系数.第1-2部分:空白详细规范.加热元件的应用.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state a) whether the thermistor is insulated or non-insulated, b) the material, c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule. 1.7 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages; d) methods of disposal of the packaging material.

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessment level EZ

BS EN 140401-803:2007+A1:2010 详细规范.低功率薄膜SMD固定电阻器.圆柱形.0.05,0.1,0.25,0.5,1和2级稳定性

Detail specification - Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2

BS EN 140401-801:2007 详细规范.低功率表面安装设备(SMD)的固定薄膜电阻器.矩形. 0.1、0.25、0.5和1级别的稳定性

This specification is part of four documents describing fixed resistors for surface mount technology as follows: EN 60115-1 Fixed resistors for use in electronic equipment - Part 1: Generic specification (IEC 60115-1, mod.) EN 140400 Sectional specification: Fixed low power surface mount (SMD) resistors EN 140401 Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors EN 140401-801 Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1

Detail specification - Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1

BS EN 140401-803:2007 详细规范.低功率薄膜SMD固定电阻器.圆柱形.0.05、0.1、0.25、0.5、1和2级稳定性

This specification is part of four documents describing fixed resistors for surface mount technology as follows: EN 60115-1 Fixed resistors for use in electronic equipment - Part 1: Generic specification (IEC 60115-1, mod.) EN 140400 Sectional specification: Fixed low power surface mount (SMD) resistors EN 140401 Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors EN 140401-803 Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2

Detail specification - Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2

BS EN 140401-802:2007+A2:2013 详细规范.低功率表面安装设备(SMD)的固定薄膜电阻器.矩形.1和2级别的稳定性

Detail specification: Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2

BS EN 140401-803:2007+A2:2013 详细规范.低功率薄膜SMD固定电阻器.圆柱形.0.05、0.1、0.25、0.5、1和2级稳定性

Detail specification - Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2

BS EN 140401-802:2007 详细规范.低功率表面安装设备(SMD)的固定薄膜电阻器.矩形.1和2级别的稳定性

This specification is part of four documents describing fixed resistors for surface mount technology as follows: EN 60115-1 Fixed resistors for use in electronic equipment - Part 1: Generic specification (IEC 60115-1, mod.) EN 140400 Sectional specification: Fixed low power surface mount (SMD) resistors EN 140401 Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors EN 140401-802 Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2

Detail specification - Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2

DLA QPL-7990-16-2007 负70到300度电阻温度传递器

MIL-T-7990 was made "Inactive for New Design" with no superseding specification on 26 March 1999.

TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, -70 DEG. TO +300 DEG. C

DLA MIL-PRF-22 E SUPP 1-2007 (功率型绕线)可变电阻器的一般规格

This supplement forms a part of MIL-PRF-22E, dated 1 May 2007

RESISTORS, VARIABLE, (WIREWOUND, POWER TYPE), GENERAL SPECIFICATION FOR

DLA MIL-PRF-22 E-2007 (功率型绕线)可变电阻器的一般规格

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

RESISTORS, VARIABLE, (WIREWOUND, POWER TYPE), GENERAL SPECIFICATION FOR

BS EN 140401-804:2005 详细规范:低功率非线绕高稳定性表面安装(SMD)固定电阻器.矩形芯片.稳定性等级0.1,0.25

This European Standard was prepared by the Technical Committee CENELEC TC 40XB, Resistors. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 140401-804 on 2004-11-01. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-10-01 – latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-10-01 This specification is part of 4 documents describing fixed resistors for surface mount technology as follows: EN 60115-1 Fixed resistors for use in electronic equipment – Part 1: Generic specification (IEC 60115-1, mod.) EN 140400 Sectional specification: Fixed low power surface mount (SMD) resistors EN 140401 Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors EN 140401-804 Detail specification: Fixed low power non-wirewound high stability surface mount (SMD) resistors – Rectangular – Stability classes 0,1; 0,25

Detail specification: Fixed low power non wire-wound high stability surface mount (SMD) resistors — Rectangular — Stability classes 0,1; 0,25

DLA DSCC-DWG-05016-2007 2.25瓦特有径向引线的涂膜固定电阻器(有散热器的高至20瓦特)

This drawing describes the requirements for a fixed, film, surface mount, 2.25 watts (20 watts with a heatsink) power device.

RESISTOR, FIXED, FILM, RADIAL LEAD, 2.25 WATTS (UP TO 20 WATTS WITH HEATSINK)

DLA DSCC-DWG-05015-2007 2.25瓦特涂膜固定贴片电阻器(有散热器的高至20瓦特)

This drawing describes the requirements for a fixed, film, surface mount, 2.25 watts (20 watts with a heatsink) power device.

RESISTOR, CHIP, FIXED, FILM, SURFACE MOUNT, 2.25 WATTS (UP TO 20 WATTS WITH HEATSINK)

DLA MIL-R-93 F SUPP 1-2007 (准确)线绕式固定电阻器的一般规定

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR

DLA MIL-R-93 F-2007 (准确)线绕式固定电阻器的一般规定

This specification covers the general requirements for accurate, wire-wound, fixed resistors having a maximum resistance tolerance of 1 percent, with the winding protected against high humidity. The resistors are rated for continuous full load operation at any ambient temperature up to 125°C, and derated up to 145°C. They are not capable for application where alternating current (ac) characteristics are of critical importance. Performance characteristics are in accordance with table I.

RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR