L15 敏感元器件及传感器 标准查询与下载

DLA SMD-5962-91631 REV A-2006 硅单块 时间传感器,直线式微型电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN

MICROCIRCUIT, LINEAR, TIMER, MONOLITHIC SILICON

DIN EN 62319-1-1:2005 聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1-1部分:空白详细规范.限流应用

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application (IEC 62319-1-1:2005); German version EN 62319-1-1:2005

DIN EN 62319-1:2005 聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1部分:总规范

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification (IEC 62319-1:2005); German version EN 62319-1:2005

ANSI/IEEE 1309:2005 9KHz-40GHz电磁场传感器和探针的校正标准(天线除外)

Provides consensus calibration methods for electromagnetic field sensors and field probes.

Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz

ANSI/IEEE 1554-200x:2005 惯性传感器试验设备、仪器、数据获取和分析的推荐实施规程

Recommended practices for gyroscope and accelerometer testing are discussed, ranging from the equipment and instrumentation employed to the way that tests are carried out and data are acquired and analyzed. Recommendations are made on techniques for acquisition, filtering, storage, and analysis of the test data in keeping with modern practice.

Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

DLA MS27188 VALID NOTICE 3-2005 防冻总温温度传感器

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

PROBE, TOTAL TEMPERATURE, DEICEABLE

SJ 54409/6-2005 CY-YZ-007 系列高温绝压传感器详细规范

本规范规定了CY-YZ-007A101型、CY-YZ-007A161型、CY-YZ-007A251型、CY-YZ-007 A351型、CY-YZ-007A701、CY-YZ-007A122型、CY-YZ-007A17642型等系列高温绝压传感器的详细要求。 本规范适用于CY-YZ-007系列高温绝压传感器（以下简称传感器）。

Detail specification of high temperature absolute pressure sensor for series CY-YZ-007

SJ 54409/5-2005 CY-YZ-006 系列高温差压传感器详细规范

本规范规定了CY-YZ-006D101型、CY-YZ-006D601型、CY-YZ-006D252型、CY-YZ-006D602型系列高温压差传感器的详细要求。 本规范适用于CY-YZ-006系列高温压差传感器（以下简称传感器）。

Detail specification of high temperature defferential pressure sensor for series CY-YZ-006

SJ 54409/7-2005 CY-YZ-008 系列常温绝压传感器详细规范

本规范规定了CY-YZ-008 A610型、CY-YZ-008 A152型、CY-YZ-008 A202型、CY-YZ-008 、CY-YZ-008A602型、CY-YZ-008A103型、CY-YZ-008A353型等系列常温绝压传感器的详细要求。 本规范适用于CY-YZ-008系列常温绝压传感器（以下简称传感器）。

Detail specification of normal temperature absolute pressure sensor for series CY-YZ-008

SJ 54409/4-2005 CY-YZ-005系列高温表压传感器详细规范

本规范规定了CY-YZ-005G101型、CY-YZ-005G601型、CY-YZ-005G252型、CY-YZ-005G602型、 CY-YZ-005G103型、CY-YZ-005G203型、CY-YZ-005G403型、CY-YZ-005G603型等系列高温表压传感器的详细要求。 本规范适用于CY-YZ-005系列高温表压传感器（以下简称传感器）。

Detail specification of high temperature gauge pressure sensor for series CY-YZ-005

IEEE 1554-2005 惯性传感器试验设备、仪器仪表、数据获取和分析的推荐实施规程

Test equipment, data acquisition equipment, instrumentation, test facilities, and data analysis techniques used in inertial sensor testing are described.

IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

IEEE 1309-2005 频率为9KHz～40GHz的电磁场传感器和探头(天线除外)的校准

Provides consensus calibration methods for electromagnetic field sensors and field probes.

Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz

NF C93-371-2:2005 高频感应部件.非电气特性和测量方法.第2部分:非电气特性的试验方法

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2 : test methods for non-electrical characteristics.

ISO 16063-22:2005 振动和冲击传感器的校准方法.第22部分:与基准传感器进行比对的冲击校准

本部分规定了采用测量随时间变化的参考加速度、速度或力的方法，对直线加速度计进行冲击比较 法校准的仪器设备及操作程序。本方法适用于冲击脉冲持续时间范围”为o．05ms～8．o llls，动态范围 (峰值)为100 m／s’一loo km／s’(与脉冲持续时间有关)。这些方法可以得到传感器的冲击灵敏度(也 就是加速度传感器输出量的峰值和加速度峰值的关系)。 这些方法不用叼；模态分析，卜川的动态力传感器的校准。 注l：本部分针对的是那些从事冲击测量的川户，他们需要如GB／T 19001《质量管理体系 要求》(idt ISO 9001)和 GB／T 1548“检测和校准实验室能力的通用要求》(idt ISO／IEC 17025)所述的可溯源性。 注2：本部分规定的方法基刁：加速度的时间历程的测量，从根本—上不同于GB／T 20485．1 2008所述基于：速度变化原 理的其他冲击校准方法，因此冲击灵敏度电从根本上不同于后者得到的冲击校准因子，但和GB/T 20485.13－ 2007冲击灵敏度一致。

Methods for the calibration of vibration and shock transducers - Part 22: Shock calibration by comparison to a reference transducer

AIR FORCE MIL-T-5882 D ADMIN NOTICE 2-2005 MS28005-1型0-50 PSI多用压力传感器

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.

TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1

NF C83-290-1:2005 热敏电阻器.直热式阶跃型正温度系数.第1部分:总规范

Thermistors - Directly heated positive step-function temperature coefficient - Part 1 : generic specification.

IEC 62319-1-1:2005 聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1-1部分:空白详细规范.限流应用

Is a supplementary document to the generic specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements shall not be considered as being in accordan

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application

IEC 62319-1:2005 聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1部分:总规范

Prescribes terms and methods of test for polymeric positive temperature coefficient thermistors, insulated and non-insulated types, typically intended for use in current limiting and overcurrent protection applications. It establishes standard terms, ins

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification

ANSI/ESD S6.1-2005 静电放电敏感元件保护的ESD协会标准.接地

This draft standard applies to bonding and grounding for the prevention of ESD in an EPA..

ESD Association Standard for the Protection of Electrostatic Discharge Susceptible Items - Grounding

ASTM E2075-05 用丙烯酸杆检验AE传感器响应一致性的标准实施规程

1.1 This practice is used for routinely checking the sensitivity of acoustic emission (AE) sensors. It is intended to provide a reliable, precisely specified way of comparing a set of sensors, or telling whether an individual sensor''s sensitivity has degraded during its service life, or both.1.2 This practice is not a "calibration" nor does it give frequency response information.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod