L23 连接器 标准查询与下载

DIN EN 61076-2-104:2015 电子设备用连接器.产品要求.第2-104部分:带M8螺纹锁紧或弹簧锁紧的圆形连接器详细规格(IEC 61076-2-104-2014);德文版本EN 61076-2-104-2014

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2014); German version EN 61076-2-104:2014

IEC 60320-1:2015 家庭和类似用途器具连接器.第1部分:一般要求

This part of lEC 60320 sets the general requirements for appliance couplers for two poles and two poles with earth contact and for the connection of electrical devices for household and similar onto the mains supply. This part of lEC 60320 is also valid for appliance inlets/appliance outlets integrated or incorporated in appliances. The rated voltage does not exceed 250 V (a.c.) and the rated current does not exceed 16 A. Appliance couplers complying with this part of lEC 60320 are suitable for normal use at ambient temperatures not normally exceeding +40 °C, but their average over a period of 24 h does not exceed +35 °C, with a lower limit of the ambient air temperature of -5 °C. Appliance couplers are not suitable for use in place of plug and socket-outlet systems according to IEC 60884-1; use in place of devices for connecting luminaires (DCLs) according to IEC 61995 or luminaire supporting couplers (LSCs). NOTE Requirements for d.c. are under consideration.

Appliance couplers for household and similar general purposes - Part 1: General requirements

BS IEC 60512-1-101:2015 电子设备连接器. 试验和测量. 空白详细规格

Connectors for electronic equipment. Tests and measurements. Blank detail specification

IEC 60512-1-101:2015 电子设备连接器. 试验和测量. 第1-101部分: 空白详细规格

Connectors for electronic equipment - Testing and measurements - Part 1-101: Blank detail specification

JIS C 5402-16-9:2015 电子设备连接器. 试验和测量. 第16-9部分: 接触和终端的机械试验. 试验16i: 接地触点弹簧自持力

Connectors for electronic equipment -- Tests and measurements -- Part 16-9: Mechanical tests on contacts and terminations -- Test 16i: Grounding contact spring holding force

JIS C 5402-16-13:2015 电子设备连接器. 试验和测量. 第16-13部分: 接触和终端的机械试验. 试验16m: 无焊绕接连接器的退绕能力

Connectors for electronic equipment -- Tests and measurements -- Part 16-13: Mechanical tests on contacts and terminations -- Test 16m: Un-wrapping, solderless wrapped connections

JIS C 5402-17-2:2015 电子设备连接器. 试验和测量. 第17-2部分: 电缆夹试验. 试验17b: 电缆夹阻挡电缆旋转

Connectors for electronic equipment -- Tests and measurements -- Part 17-2: Cable clamping tests -- Test 17b: Cable clamp resistance to cable rotation

JIS C 5402-17-4:2015 电子设备连接器. 试验和测量. 第17-4部分: 电缆夹试验. 试验17d: 电缆夹阻挡电缆扭转

Connectors for electronic equipment -- Tests and measurements -- Part 17-4: Cable clamping tests -- Test 17d: Cable clamp resistance to cable torsion

JIS C 5402-16-8:2015 电子设备连接器. 试验和测量. 第16-8部分: 接触和终端的机械试验. 试验16h: 绝缘夹具有效性 (压接连接件)

Connectors for electronic equipment -- Tests and measurements -- Part 16-8: Mechanical tests on contacts and terminations -- Test 16h: Insulating grip effectiveness (crimped connections)

JIS C 5402-17-1:2015 电子设备连接器. 试验和测量. 第17-1部分: 电缆夹试验. 试验17a: 电缆夹的坚固性

Connectors for electronic equipment -- Tests and measurements -- Part 17-1: Cable clamping tests -- Test 17a: Cable clamp robustness

BS EN 61169-50:2015 射频连接器. 带有内径为4,11 mm且具有快锁系统的外部导体的RF同轴连接器分规格. 特性阻抗50 Ohm (QMA型)

Radio-frequency connectors. Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system. Characteristic impedance 50 Ohm (type QMA)

BS EN 61169-48:2015 射频连接器. 系列BMP R.F.同轴连接器分规格

Radio-frequency connectors. Sectional specification for series BMP R.F. coaxial connectors

JIS C 5964-20:2015 光纤连接器接口.第20部分:LC型连接器系列

Fiber optic connector interfaces -- Part 20: Type LC connector family

JIS C 61300-1:2015 光纤连接器和无源组件.基础试验和测量过程.第1部分:总则和指南

Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 1: General and guidance

IEC 61169-47:2015 射频连接器.第47部分:75Ώ电缆网络应用的典型带夹接的同轴高频插接件(F-快速型)

This part of IEC 61169@ which is a sectional specification (SS)@ provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with clamp coupling@ typically for use in 75 ?? cable networks (type F-Quick). It describes the interface dimensions with gauging information@ electrical and mechanical performance including the mandatory tests selected from IEC 61169-1:2013@ applicable to all DS relating to type F-Quick connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. NOTE This interface is typically used for indoor connections@ which are easily disconnected and reconnected. The typical application is for F-type coaxial receiver leads or F-type coaxial patch cables. The interface may also be known as a Push-on connector. It is preferred to use the fixed (screwed) connectors type F according to IEC 61169-24:2009.

Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ώ cable networks (type F-Quick)

DIN EN 61076-2-109:2015 电子设备连接器. 产品要求. 第2-109部分: 圆形连接器. 频率高达500 MHz数据传输用带螺纹锁紧的M 12 × 1连接器的详细规格 (IEC 61076-2-109-2014); 德文版本EN 61076-2-109-2014

Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz (IEC 61076-2-109:2014); German version EN 61076

DIN EN 61169-45:2015 射频连接器. 第45部分: SQMA系列快锁射频 (RF) 连接器的分规格 (IEC 61169-45-2014); 德文版本EN 61169-45-2014

Radio-frequency connectors - Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors (IEC 61169-45:2014); German version EN 61169-45:2014

IEC 61300-2-51:2007/COR1:2015 纤维光学互连器件和无源元件.基础试验和测量程序.第2-51部分:试验.带外加拉伸负载的传输用纤维光学连接器试验.单模和多模;勘误1

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode

IEC 61300-2-50:2007/COR1:2015 纤维光学互连器件和无源元件.基础试验和测量程序.第2-50部分:试验.带静载荷的纤维光学连接器检验试验.单模和多模

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode

BS EN 61300-3-14:2014 纤维光学互连器件和无源元件. 基本试验和测量程序. 检查和测量. 可变光衰减器衰减设置的错误和重复性

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Error and repeatability of the attenuation settings of a variable optical attenuator