L23 连接器 标准查询与下载

BS PD IEC/TS 61586:2017 电气连接器可靠性评定

Estimation of the reliability of electrical connectors

BS IEC 62946-02:2017 电子设备连接器. 频率为250 MHz及以下, 载流能力1 A及以下的数据传输用8路无屏蔽活动和固定式高密度连接器详细规格

Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission with frequencies up to 250 MHz and with current carrying capacity up to 1 A

IEC 61076-2-113:2017 电子设备连接器. 产品要求. 第2-113部分: 圆形连接器. 频率为100 MHz及以下的数据传输用带M12螺钉锁功率和信号接口连接器详细规格

This part of IEC 61076 describes M12 circular connectors with two data pairs and power contacts with current ratings up to 12 A, that are typically used for data and power applications in industrial premises. These connectors consist of both fixed and free connectors either rewireable or non rewireable, with screw-locking. Male connectors have round contacts diameters of 1,50 mm, 1,00 mm and 0,60 mm. The different codings provided by this document prevent the mating of accordingly coded male or female connectors to any other similarly sized interfaces covered by other standards and the cross-mating between the different codings provided by this document. NOTE M12 is the dimension of the thread of the screw locking mechanism of these circular connectors.

Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz

DIN EN 61300-2-37:2017 纤维光学互连器件和无源元件.基本试验和测量程序.第2-37部分:试验.纤维光学外壳的光缆弯曲(IEC 61300-2-37-2016);德文版本EN 61300-2-37-2016

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures (IEC 61300-2-37:2016); German version EN 61300-2-37:2016

DIN EN 60154-1:2017 波导法兰盘.第1部分:一般要求(IEC 60154-1-2016);德文版本EN 60154-1-2016

Flanges for waveguides - Part 1: General requirements (IEC 60154-1:2016); German version EN 60154-1:2016

BS EN 61753-052-3:2016 纤维光学互连装置和无源元件性能标准.单模光纤的非连接式固定衰减器.非受控环境U类

Fibre optic interconnecting devices and passive components. Performance standard. Single-mode fibre non-connectorized fixed attenuator. Category U in uncontrolled environment

IEC 60309-5:2017 工业用插头, 插座和耦合器. 第5部分: 低压海上连接系统(LVSC)插头, 插座, 船用连接器和船用插孔的尺寸兼容性与互换性要求.

This part of 60309 applies to a single type of plug, socket-outlet, ship connector and ship inlet, hereinafter referred to as accessories, intended to connect ships to dedicated shore supply systems described in IEC/IEEE 80005-3. This part of IEC 60309 applies to three-phase accessories with an earth contact and with four pilot contacts. NOTE 1 In the following countries the term "ground" is used instead of "earth": US. These accessories have a maximum rated current of 350 A and a maximum rated operating voltage not exceeding 690 V 50/60 Hz. NOTE 2 The various operating currents, voltages and frequencies required for various types of ship are set by the shore supply system described in IEC/IEEE 80005-3. These accessories are intended to be installed and operated by instructed persons (IEC 60050-195:1998, Amendment 1:2001, 195-04-02) or skilled persons (IEC 60050-195:1998, Amendment 1:2001, 195-04-01) only. This standard applies to accessories for primary use outdoors in a seawater environment when the ambient temperature is normally within the range of -25 °C to +40 °C. NOTE 3 In some countries, other ambient temperatures may prevail and may need to be taken into account. These accessories are intended to be connected to cables of copper or copper alloy only. Socket-outlets or ship inlets incorporated in or fixed to electrical equipment which is part of the shore connection system are within the scope of this standard. In locations where special conditions prevail, for example where explosions are liable to occur, additional requirements may be necessary.

Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)

IEC 62946-02:2017 电子设备连接器. 第02部分: 频率为250 MHz及以下, 载流能力1 A及以下的数据传输用8路无屏蔽活动和固定式高密度连接器详细规格

This part of IEC 62946 covers 8-way, unshielded free and fixed high density connectors for data transmission with frequencies up to 250 MHz and with extra low voltage current carrying capabilities up to 1 A, and is intended to specify the common dimensions, mechanical, electrical, signal integrity and environmental characteristics and tests for these connectors.

Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission with frequencies up to 250 MHz and with current carrying capacity up to 1 A

ASTM B888/B888M-17 电连接器或弹簧触点制造用铜合金带材的标准规格

1.1 This specification establishes the requirements for copper alloy strip for use in the manufacture of electrical connectors or spring contacts produced from one of the following Copper Alloy UNS Nos.2: C14530, C15100, C15500, C17000, C17200, C17410, C17450, C17460, C17500, C17510, C19002, C19010, C19015, C19025, C19210, C19400, C19500, C19700, C23000, C26000, C40810, C40850, C40860, C42200, C42500, C42520, C42600, C50580, C50780, C51000, C51080, C51100, C51180, C51980, C52100, C52180, C52480, C63800, C64725, C65400, C68800, C70250, C70260, C70265, C70310, C70350, C75200, and C76200. 1.2 The requirements for the other copper alloys such as copper-nickel-tin spinodal, UNS C72650, C72700, and C72900, shall be as prescribed in the current edition of Specification B740. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

BS EN 61169-54:2016 射频连接器. 带内径10 mm的外部导体且标称特性阻抗50 $2I的4,3-10系列同轴连接器分规格

Radio-frequency connectors. Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 $2I, series 4,3-10

BS EN 61076-3-110:2016 电子设备用连接器.产品要求.矩形连接器.频率小于3000 MHz的数据传输用活动和固定式连接器的详细规范

Connectors for electronic equipment. Product requirements. Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz

BS EN 61169-58:2016 射频连接器. 盲插连接射频同轴连接器分规格. 特性阻抗50 (SBMA型)

Radio-frequency connectors. Sectional specification for RF coaxial connectors with blind-mate coupling. Characteristic impedance 50 (type SBMA)

JIS C 5402-22-1:2016 电子设备连接器. 试验和测量. 第22-1部分: 电容试验. 试验22a: 电容

Connectors for electronic equipment -- Tests and measurements -- Part 22-1: Capacitance tests -- Test 22a: Capacitance

JIS C 5402-8-2:2016 电子设备连接器. 试验和测量. 第8-2部分: 静荷载试验(固定式连接器). 试验8b: 轴向静荷载

Connectors for electronic equipment -- Tests and measurements -- Part 8-2: Static load tests (fixed connectors) -- Test 8b: Static load, axial

JIS C 5402-12-1:2016 电子设备连接器. 试验和测量. 第12-1部分: 焊接试验. 试验12a: 采用焊料湿浴法测定可焊性

Connectors for electronic equipment -- Tests and measurements -- Part 12-1: Soldering tests -- Test 12a: Solderability, wetting, solder bath method

JIS C 5402-12-5:2016 电子设备连接器 试验和测量 第 12-5 部分：焊接试验 试验 12e：耐焊接热，烙铁法

Connectors for electronic equipment -- Tests and measurements -- Part 12-5: Soldering tests -- Test 12e: Resistance to soldering heat, soldering iron method

JIS C 5402-12-4:2016 电子设备连接器. 试验和测量. 第12-4部分: 焊接试验. 试验12d: 采用焊料浴法测定耐焊接热

Connectors for electronic equipment -- Tests and measurements -- Part 12-4: Soldering tests -- Test 12d: Resistance to soldering heat, solder bath method

JIS C 5402-12-2:2016 电子设备连接器. 试验和测量. 第12-2部分: 焊接试验. 试验12b: 采用铁湿钎焊法测定可焊性

Connectors for electronic equipment -- Tests and measurements -- Part 12-2: Soldering tests -- Test 12b: Solderability, wetting, soldering iron method

IEC TS 62735-2:2016 安装在数据中心和电信中心办公室的信息和通信技术（ICT）设备用直流（DC）插头和插座第2部分:5.2kW插头和插座系统

This clause of Part 1 is applicable except as follows: Replacement: Replace the first paragraph with the following: This part of IEC 62735, which is a technical specification, applies to plugs and fixed socket- outlets for class I equipment with two active contacts plus an earthing contact, a rated power of 5,2 kW and a rated voltage range from 294 V to 400 V d.c. They are intended to power d.c. information and communication technology equipment only. The 2,6 kW system complying with Part 1 is safely compatible with the system complying with this part as it is possible to insert the 2,6 kW plug in the 5,2 kW socket-outlet but it is not possible to insert the 5,2 kW plug into the 2,6 kW socket-outlet. Replace the third paragraph with the following: The maximum current for the plug and the socket-outlet is 13 A when the voltage between live contacts is 400 V d.c; 17,6 A when the voltage between live contacts is 294 V d.c. and can rise up to 20 A when the voltage between live contacts decreases to 260 V d.c. for 10 min maximum. Replace, in the 6th paragraph, the second dash with; an overcurrent protection (of 17,6 A or less for each socket-outlet or multiple socket- outlet).

Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 2: Plug and socket-outlet system

DIN EN 60603-7-81:2016 电子设备连接器.第7-81部分:频率为2000 MHz及以下的数据传输用8路屏蔽活动和固定式连接器详细规格(IEC 60603-7-81-2015).德文版本EN 60603-7-81-2016

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz (IEC 60603-7-81:2015); German version EN 60603-7-81:2016