L24 安装、接线连接件 标准查询与下载

ITU-T SERIES Q SUPP 24-1999 技术报告TRQ.3020: 带有宽带综合业务数字网用户部分(B-ISUP)用于AAL类型1自适应

This Supplement contains information relevant to the operation of the Bearer Independent Call Control (BICC) protocol with the B-ISUP signalling protocol used for the control of AAL Type 1 bearer connections.

Technical Report TRQ.3020: Operation of the Bearer Independent Call Control (BICC) Protocol with Broadband Integrated Services Digital Network User Part (B-ISUP) for AAL Type 1 Adaptation Services Q: Switching and Signalling Study Group 11

IEC 60998-1/AMD1:1998 家用和类似用途低压电路连接设备.第1部分:一般要求.修改件1

Connecting devices for low voltage circuits for household and similar purposes - Part 1: General requirements; Amendment 1

ANSI/EIA 364-79:1998 电气连接件的插入连接强度试验程序

Provides a technique for evaluating the strength of a bond between one or more conpoments, for example, a grommet seal bonded to a connector insert.

Insert Bond Strength Test Procedure for Electrical Connectors

SJ/T 11166-1998 集成电路卡(IC卡)插座总规范

本规范规定了集成电路卡(IC卡)插座的一般要求、试验方法及检验规则。 本规范适用于集成电路卡(IC卡)插座(以下简称插座)。而插座所适用的集成电路卡(IC卡，以下也简称卡)应符合ISO7816-1所规定的定义。

Generic specification for sockets for integrated circuit(s)card (IC card)

ITU-T SERIES I SUPP 1-1998 I.250中定义的10项补充业务的一般业务描述.系列建议

Generic Service Descriptions for Ten Supplementary Services Defined in I.250 - Series Recommendations - Series I: Integrated Services Digital Network - Service Capabilities - Supplementary Services in ISDN Study Group 2; 35 pp

Generic Service Descriptions for Ten Supplementary Services Defined in I.250 - Series Recommendations - Series I: Integrated Services Digital Network - Service Capabilities - Supplementary Services in ISDN Study Group 2; 35 pp

ITU-R M.825-3-1998 用于船只业务和船-船识别的使用数字选择呼叫技术的转发器系统的特征

Several administrations have requirements for a radio transponder system for the purpose of obtaining information on ships entering and sailing within vessel traffic service (VTS) areas.

Characteristics of a Transponder System Using Digital Selective Calling Techniques for Use with Vessel Traffic Services and Ship-to-ship Identification

ANSI/EIA 364-07B:1998 电连接件.压合接头变形试验程序

Establishes a test method to determine the straightness of contacts by measuring a total indicator reading (TIR) value.

Electric Connectors - Crimp Contact Deformation Test Procedure

ANSI/EIA 364-50A:1998 电气连接件.砂尘试验过程

Establishes a test method to ascertain the ability of fully wired connector assemblies to resist the effects of a dry dust (fine sand) laden atmosphere.

Dust (Fine Sand)Test Procedure for Electrical Connectors

ANSI/EIA 700D000:1997 已认证质量的不连续触点的分规范

Applies to discrete contact components for use in direct current and analog applications for frequencies below 3 mhz and in digital applications requiring higher data rate frequencies.

Sectional Specification for Discrete Contacts of Certified Quality

DIN 47608-2:1997 电信系统带切断端子触点的端子板.第2部分:要求、试验

The document DIN 47608-2 is revised to the current technical level.

Terminal strips with insulation displacement contacts for telecommunication systems - Part 2: Requirements, test

ANSI WD6-1997 配线装置.尺寸规范

These standards cover dimension requirements for plugs and receptacles rated up to 60 ampere and 600 volts. They also include dimensions for wallplates.These standards do not cover other requirements since these are included in NEMA Standards Publication No.WD 1, General Requirements for Wiring Devices.

WIRING DEVICES - DIMENSIONAL SPECIFICATIONS

ITU-T Q.1222-1997 IN CS-2业务平面

In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.

Service Plane for Intelligent Network Capability; Set 2 - Series Q: Switching and Signalling; Intelligent Network Study Group 11; 11 pp

ITU-T Q.1551-1997 UPT业务子集1的智能网应用协议(INAP)CS-1的应用

This Recommendation describes the application of INAP CS-1 (Refined) for UPT Service Set 1. It explains how to use INN as defined in CS-1 Refinements to provide the UPT service.

Application of Intelligent Network Application Protocols (INAP) CS-1 for UPT Service Set 1 - Series Q: Switching and Signalling Intelligent Network Study Group 11; 150 pp

UL 486A-1997 铜导线用接线器和焊片

Wire connectors and soldering lugs for use with copper conductors

ITU-R M.816-1-1997 IMT-2000支持业务的框架

International Mobile Telecommunications-2000 (IMT-2000) are third generation mobile systems which are scheduled to start service around the year 2000 subject to market considerations. They will provide access, by means of one or more radio links, to a wi

Framework for Services Supported on International Mobile Telecommunications-2000 (IMT-2000)

ITU-R BO.2016-1997 40.5-42.5 GHz 波段BSS系统

The purpose of this Report is to provide a preliminary assessment of the technical feasibility of using the band 40.5 to 42.5 GHz for applications within the broadcasting satellite service (BSS), to which this band is allocated on a worldwide primary basi

BSS Systems for the 40.5-42.5 GHz Band

ANSI/EIA 364-92:1997 电连接件的绝缘替代接头（IDC）的引线挠曲度试验程序

Assess the ability of an insulation displacement connection to withstand the mechanical stress caused by bending the connected wire or ribbon cable in a specified manner.

Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

ANSI/EIA 364-93:1997 电连接件的绝缘替代接头（IDC）的返复线连接和断开试验程序

Assesses the ability of a reusable insulation displacement termination to withstand a specified number of connections and disconnections.

Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

ANSI/EIA 364-94:1997 电连接件的绝缘替代接头（IDC）的TP-94横向拨出力试验程序

Determines the force necessary to remove the wire within connection slot of an accessible insulation displacement termination along the longitudinal axis of the termination.

TP-94, Transverse Extraction Force Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

ANSI/EIA 364-98:1997 电连接件的外壳锁紧机构强度试验程序

Covers the test procedure for determining retention strength of the locking retention features of mated plastic connector housings.

Housing Locking Mechanism Strength Test Procedure for Electrical Connectors