L26 波导同轴元件及附件 标准查询与下载

BS EN 61338-2:2004 波导型介质谐振器.振荡器和滤波器指南

This part of IEC 61338, which contains guidelines for use, is limited to the waveguide type dielectric resonators that are used for oscillator and filter applications. These types of resonators are now widely used in oscillators for direct broadcasting or communication satellite systems, oscillators for radio links, voltage-controlled oscillators for mobile communication systems and so on. In addition, these dielectric resonators are also used as an essential component of miniaturized filters for the same kind of applications. It is not the aim of this standard either to explain theory or to attempt to cover all the eventualities that may arise in practical circumstances. This standard draws attention to some of the more fundamental questions, which should be considered by the user before he places an order for dielectric resonators for a new application. Such a procedure will be the user's insurance against unsatisfactory performance. Standard specifications, such as those in the IEC 61338 series and national specifications or detail specifications issued by manufacturers, will define the available combinations of resonance frequency, the quality factor, the temperature coefficient of resonance frequency, etc. These specifications are compiled to include a wide range of dielectric resonators with standardized performances. It cannot be over-emphasized that the user should, wherever possible, select his dielectric resonators from these specifications, when available, even if it may lead to making small modifications to his circuit to enable standard resonators to be used. This applies particularly to the selection of the nominal frequency.

Waveguide type dielectric resonators - Guidelines for oscillator and filter applications

DLA MIL-DTL-3922 C SUPP 1A-2004 常用波导管凸缘的一般规范

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR

SJ 50676/6-2003 HBG008B、HBG008C型高功率结型波导环行器详细规范

Circulators, high power, waveguide junction, type HBG008B、HBG008C, detail specification for

IEC 60966-3-2:2003 射频同轴电缆组件.第3-2部分:GSM(0.8GHz-1GHz)用半柔软同轴电缆组件详细规范

Relates to the subfamily of coaxial cables and connector assemblies operating int he frequency range of GSM (0,8 GHz - 1 GHz). Gives subfamily requirements and severities to be applied. Should be used together with IEC 60966-3 and IEC 600966-1.

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

IEC 60966-4-1:2003 射频同轴电缆组件.第4-1部分:半硬同轴电缆组件空白详细规范

Supplementary document of the sectional specification and contains requirements for style and layout and minimum content of detail specifications.

Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies

IEC 60966-4:2003 射频同轴电缆组件.第4部分:半硬性同轴电缆组件分规范

Relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). Establishes uniform requirements for testing the electrical, mechanical and environmental properties of semi-rigid coaxial cable assemblies composed of

Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies

IEC 60966-3-1:2003 射频同轴电缆组件.第3-1部分:半柔软同轴电缆组件空白详细规范

Supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications.

Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies

IEC 60966-3:2003 射频同轴电缆组件.第3部分:半柔软同轴电缆组件分规范

Relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). Establishes uniform requirements for testing the electrical, mechanical and environmental properties of semi-flexible coaxial cable assemblies compo

Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies

NF C93-594-1:2003 波导法兰盘.第1部分:一般要求

Flanges for waveguides - Part 1 : general requirements.

NF C93-594-1/A1:2003 波导法兰盘.第1部分:一般要求

Flanges for waveguides - Part 1 : general requirements.

NF C90-130-2-1:2002 同轴电缆.第2-1部分:电缆配电网络用电缆的分规范.在5MHz-1000 MHz下工作的系统的室内引入电缆

Coaxial cables - Part 2-1 : sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz.

NF C93-592/A1:2002 波导法兰盘.第2部分:普通矩形波导法兰盘的有关规范

Flanges for waveguides - Part 2 : relevant specifications for flanges for ordinary rectangular waveguides.

NF C93-593-7*NF EN 61580-7:2002 波导管测量方法.第7部分:波导管性能测定的图解法

Methods of measurement for waveguides - Part 7 : graphical method for the determination of waveguide performance.

NF C90-130-1:2002 同轴电缆.第1部分:通用规范

Coaxial cables - Part 1 : generic specification.

DIN EN 170101:2002 空白详细规范.波导型介电谐振器.能力鉴定

The document is a supplementary document to the sectional specification and contains requirements for the minimum content of detail specifications. It applies to waveguide type dielectric resonators as custom built products or as standard catalogue items.

Blank detail specification - Waveguide type dielectric resonators - Capability approval; German version EN 170101:2001

DIN EN 170100:2002 分规范.波导型介电谐振器

The document applies to waveguide type dielectric resonators as custom built products or as standard catalogue items whose quality is assessed on the basis of capability approval.

Sectional specification - Waveguide type dielectric resonators; German version EN 170100:2001

BS EN 170100:2001 电子元器件质量评定协调体系.分规范:波导型介质谐振器

This sectional specification applies to waveguide type dielectric resonators as custom built products or as standard catalogue items whose quality is assessed on the basis of capability approval. It prescribes the preferred ratings and characteristics with the appropriate tests and measuring methods contained in the generic specification EN 170000, and gives the general performance requirements to be used in detail specifications for waveguide type dielectric resonators. The concept of preferred values is in general directly applicable to standard catalogue items but does not necessarily apply to custom built products.

Harmonized system of quality assessment for electronic components - Sectional specification: Waveguide type dielectric resonators

SJ 51510/3-2000 5类2.4∶1双脊可扭软波导组件详细规范

Waveguide assemblies,flexible,twistable double ridge(band width ratio 2.4∶1),class 5,detail specification for

SJ 51510/4-2000 7类2.4∶1双脊不可扭软波导组件详细规范

Waveguide assemblies,flexible,nontwistable double ridge(band width ratio 2.4∶1),class 7,detail specification for

DIN EN 61338-1-3:2000 波导型介电谐振器.第1-3部分:一般信息和试验条件.微波介电谐振器材料的复相对介电常数的测量方法

The document describes the dielectric rod resonator measurement method for a wide range of microwave dielectric properties in practical applications.

Waveguide type dielectric resonators - Part 1-3: General information and test conditions; Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (IEC 61338-1-3:1999); German version EN 61338-1-3:2000