L38 电子束管 标准查询与下载

DIN EN 112000:1996 总规范.光电图像变换管和视频放大器管

Generic specification - Image converter and image intensifier tubes; German version EN 112000:1992

SJ 20477-1995 交流等离子体显示器件总规范

General specification for AC Plasma display devices

SJ 20474-1995 冷阴极触发管总规范

General specification for cold-cathode trigger tubes

SJ/T 10548-1994 彩色显像管玻屏空白详细规范（可供认证用）

本空白详细规范是SJ/T 10543《彩色显象管玻壳总规范》的补充性文件。它规定了详细规范所采用的格式和包括的内容。

Blank detail specification for panel of colour picture tue bulbs

SJ/T 10545-1994 黑白显像管电子枪空白详细规范

本空白详细规范是SJ/T 10408《黑白显象管电子枪总规范》的补充性文件。它规定了黑白显象管(单色显示管)电子枪详细规范所采用的格式和包括的内容。

Blank detail specification for electron gun of black-and white picture tube

SJ/T 10544-1994 彩色显示管空白详细规范（可供认证用）

本空白详细规范是GB 5960《阴极射线管总规范》的补充性文件，它规定了彩色显示管详细规范所采用的格式和包括的内容。

Blank detail specification for colour display tubes

SJ/T 10556-1994 黑白显像管用外导电石墨乳

1．1 本标准规定了黑白显像管用外导电石墨乳的技术要求、试验方法、检验规则、包装、标志、运输与贮存。 1.2 本标准适用于黑白显像管用外导电石墨乳。

Exterior colloidal graphite for black and white picture tubes

SJ/T 10543-1994 彩色显像管玻壳总规范（可供认证用）

本规范规定了彩色显象管玻壳质量评定的程序，并给出了玻屏和玻锥的缺陷、尺寸、玻璃特性、性能的检验及其试验方法。 本规范适用于彩色显象管玻屏和玻锥。

General specification for colour picture tube bulbs

SJ/T 10549-1994 彩色显像管玻锥空白详细规范（可供认证用）

本空白详细规范是SJ/T 10543《彩色显象管玻壳总规范》的补充性文件。它规定了详细规范所采用的格式和包括的内容。

Blank detail specification for funnel of colour picture tube bulbs

SJ/T 10407-1993 摄象管外形图的绘制

本标准规定了摄象管外形图的绘制规则。 本标准适用于摄象管外形图的绘制。

Preparation of outline drawings of camera tubes

SJ/T 10467-1993 电子束管质量工程控制指南

本标准规定了电子束管质量形成全过程所要控制的基本要素和控制方法。 本标准适用于普通电子束管的设计、制造过程，企业可结合具体产品的情况填制本标准中的有关表格，并补充必要的内容。

Guidelines of quality engineering control for electronic beam tubes

SJ/T 10409-1993 黑白显象管玻壳空白详细规范（可供认证用）

Blank detail specification for black-and-white picture tube bulbs

SJ/T 10408-1993 黑白显象管电子枪总规范（可供认证用）

本规范规定了黑白显象管电子枪质量评定程序，并给出了直观、尺寸、电参数、机械、环境、工作耐久性的技术要求和检验方法。 本规范由适用于某种特定类型的电子枪空白详细规范进一步补充。 本规范适用于黑白显象管电子枪、也适用于单色显示管电子枪。

Generic specification for electron gun of black-and-white picture tubes

SJ/T 9557-1993 黑白显象管质量分等标准

本标准适用于黑白显象管的质量分等。 本标准只给出了关键性技术指标。不是一个完整的标准，必须与GB5960、GB6206和有关详细规范一起使用。

Grading standard of quality for black and white picture tubes

SJ/T 9558-1993 彩色显象管质量分等标准

本标准适用于彩色显象管的质量分等。 本标准只给出了关键性技术指标，不是一个完整的标准，必须与GB 5960、GB 5961和有关详细规范一起使用。

Grading standard of quality for colour picture tubes

DIN EN 113001:1993 空白详细规范.电视摄象管

This document contains a blank detail specification for camera tubes.

Blank detail specification: camera tubes; German version EN 113001:1991

DIN EN 111100:1993 分规范.显示存储管

The document relates to display storage tubes of assessed quality.

Sectional specification: display storage tubes; german version EN 111100:1991

DIN EN 111101:1993 空白详细规范.显示存储管

The document contains a blank detail specification for display storage tubes.

Blank detail specification: display storage tubes; german version EN 111101:1991

WJ 2091-1992 微光像增强器试验方法

Low-light image intensifier test method

ASTM E1165-92(1996)E1 用针孔成像法测量工业X射线管焦点的标准试验方法

1.1 This test method provides instructions for determining the length and width dimensions of line focal spots in industrial X-ray tubes (see Note 1). This determination is based on the measurement of an image of a focal spot that has been radiographically recorded with a "pinhole" projection/imaging technique. Note 18212;Line focal spots are associated with vacuum X-ray tubes whose maximum voltage rating does not generally exceed 500 kV.1.2 This test method may not yield meaningful results on focal spots whose nominal size is less than 0.3 mm (0.011 in.). (See Note 2.) Note 28212;The X-ray tube manufacturer may be contacted for nominal focal spot dimensions.1.3 This test method may also be used to determine the presence or extent of focal spot damage or deterioration that may have occurred due to tube age, tube overloading, and the like. This would entail the production of a focal spot radiograph (with the pinhole method) and an evaluation of the resultant image for pitting, cracking, and the like.1.4 Values stated in SI units are to be regarded as the standard. Inch-pound units are provided for information only.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging