L38 电子束管 标准查询与下载

SJ/T 10890-2003 阴极射线管有效屏面缺陷规范

本标准规定了阴极射线管有效屏面缺陷所用术语和定义、缺陷规范以及缺陷的检验方法等。 本标准适用于示波管和存储管、黑白显像管和指示管、单色显示管以及彩色显像管和彩色显示管有效屏面缺陷的判定。

Defect criteria in useful screen area for cathode ray tubes

CEA-2007-2003 QoS优先组802.1Q

The purpose of this specification is to allow three Quality of Service (QoS) models to coexist concurrently on Ethernet based networks that use Internet protocols (IP) and the IEEE 802.1Q priority.

QoS Priority Groupings for 802.1Q

CEA-CEB12-A-2003 PSIP的推荐实践

This bulletin, CEA-CEB12-A, provides guidance for the development and implementation of Advanced Television Systems Committee (ATSC) Program and System Information Protocol (PSIP)-compliant receivers, cable-ready DTV receivers, personal recorders and other consumer electronics devices. It includes recommendations and suggestions for device functionality. CEA-CEB12-A should in no way prohibit consumer device manufacturers from including additional features, and CEA-CEB12-A should not be interpreted as recommending an upper limit to device performance.

PSIP Recommended Practice

SJ 20845-2002 高清晰显示管用稀土彩色荧光粉规范

Specification for color phosphors for high resolution display tube

SJ/T 11272-2002 车载彩色显示器通用规范

本规范规定了车载视听系统中彩色显示器的要求、试验方法、质量评定程序、标志、包装、运输、贮存等。 本规范适用于车载视听系统中彩色显示器。

General specification for vehicle colour monitor

DIN EN 60522:2002 X射线管组件永久式过滤测定(IEC 60522:1999); 德文版本 EN 60522:1999

The document defines the concept of the permanent filtration of X-ray tube assemblies for medical diagnosis and radiotherapy and describes a method for its determination.

Determination of the permanent filtration of X-ray tube assemblies (IEC 60522:1999); German version EN 60522:1999

SJ/T 11269-2002 显像管玻壳型号命名方法

本标准规定了显像管(含显示管)玻壳的型号命名方法。 本标准适用于各类显像管玻壳(玻壳包括玻屏和玻锥)的型号命名。

The type designation for picture tube bulbs

CEA-CEB11-2002 NTSC系统/ ATSC标准响度匹配

This bulletin provides guidance on maintaining uniform audio loudness between existing NTSC audio services and DTV audio services while preserving the dynamic range delivery capability of the DTV service.

NTSC/ATSC Loudness Matching

CEA-CEB5-A-2002 DTV接收器“监控器”模式能力的推荐实践

CEB5-A is intended to provide recommendations to digital television (DTV) designers/ manufacturers concerning a “monitor” mode capability. EIA/CEA-762-A provides minimum specifications for a DTV remodulator.

Recommended Practice DTV Receiver Monitor Mode Capability

CEA-762-A-2002 数字电视二次调制器规格

This standard defines minimum specifications for a one-way data path utilizing an 8-VSB trellis remodulator in compliance with ATSC Standard A/53B, Annex D. This standard applies to any type of device used to connect to an ATSC compliant digital television (DTV) receiver. Devices meeting this standard should interoperate with any ATSC compliant receiver that also supports “monitor mode.”

DTV Remodulator Specification

DIN EN 60139:2001 阴极射线管及其部件、连接件和量规外形图绘制

The document gives guidance on the preparation of outline drawings of cathode-ray tubes (CRTs), tube components, tube sub-assemblies and ancillary components with the object of encouraging the same practice when publications are prepared in different countries.

Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges (IEC 60139:2000); German version EN 60139:2001

BS EN 60139:2001 绘制阴极射线管及其部件、连接件和仪表的外形图

This International Standard gives guidance on the preparation of outline drawings of cathode-ray tubes (CRTs), tube components, tube sub-assemblies and ancillary components with the object of encouraging the same practice when publications are prepared in different countries. These recommendations are contained in the specimen drawings, descriptive text and in the tables of required dimensions.

Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges

SJ/T 11233-2001 GZS104型双聚焦极彩色显像管插座详细规范

本规范规定了CZS10-4型双聚焦极彩色显像管插座的详细要求。 本规范适用于管基尺寸符合附录A的双聚焦极彩色显像管用插座。 本规范应与GB/T 15176-1994《插入式电子元器件用插座及其附件总规范》一起使用。

Detail specification for type GZS10-4 Sockets for double focusing polar Colour picture tubers

DLA MIL-STD-1311 C-2001 电子管的测试方法

This standard establishes uniform methods for testing the environmental, physical, and electrical characteristics of electron tubes as required by MIL-PRF-1 and the applicable tube specification sheet (TSS). Unless otherwise specified or authorized, tests shall be conducted as specified herein (see 4.6).

TEST METHODS FOR ELECTRON TUBES

CEA-849-A-2001 EIA-775A兼容数字电视的应用概况

The EIA-775-A DTV 1394 Interface Specification [5] standardizes the IEEE 1394 [15] High Performance Serial Bus interface for use with a Digital Television (DTV) receiver. EIA-775-A does not state compliance requirements for the types of digital transport methods or content encoding that must be supported. This standard specifies profiles for various applications of the EIA-775-A standard. The application areas covered here include digital streams compliant with ATSC terrestrial broadcast, direct-broadcast satellite (DBS), OpenCable?US cable, and standard definition Digital Video (DV) camcorders.

Applications Profiles for EIA-775A Compliant DTVs

SJ/T 960-2000 电子束管侧引出线取向图示法

本标准规定了静电偏转类电子束管侧引出线的相对位置和取向图的表示方法。 本标准适用于有侧引出线的电子束管。

Graphic representation for arrangement of side output of electron beam tubes

SJ/T 959-2000 电子束管电极接线图图形符号

本标准规定了示波管、指示管、显像管等类型的电子束管电极接线图图形符号的绘制原则和总的绘制方法。 本标准适用于电子束管的电极接线图。

Figure symbols for electrode connection diagrams of electron beam tubes

SJ/T 958-2000 电子束管电子光学系统电极命名方法

本标准规定了电子束管电子光学系统各电极的命名方法。 本标准适用于示波管、指示管、显像管、显示管、摄像管等类型的电子束管。

Methods of electrode designation for electron optics system of electron beam tubes

IEC 61965:2000 阴极射线管的机械安全

Mechanical safety of cathode ray tubes

SN/T 0810.2-1999 出口显示器技术性能检验规程

Rules for the inspection of technical performance of monitor for export