L63 计算机外围设备 标准查询与下载

DIN 33871-1:2003 信息技术.办公机械.喷墨打印机用喷墨头和墨盒.第1部分:喷墨打印机用可再注墨的喷墨头和墨盒的准备

This standard is only valid for refillable inkjet print heads and inkjet tanks. It established properties for the preparation and testing of colour reproducing quality and cartridge yield. The aim of the standard is to assure a consistent printing quality with black or colour ink of refilled inkjet print heads and inkjet tanks.

Information technology - Office machines, inkjet print heads and inkjet tanks for inkjet printers - Part 1: Preparation of refilled inkjet print heads and inkjet tanks for inkjet printers

ANSI/VITA 1.5-2003 2eSST

This proposed standard is an extension to the VME64 (ANSI/VITA 1-1994) and VME64x (ANSI/VITA1.1-1997) standards. It defines a new transfer protocol, based upon source synchronous concepts that permits the VMEbus to operate at rates up to 320MB/s.

2eSST

KS X ISO 15707:2003 信息和文献学.国际标准音乐管理代码(ISWC)

? ??? ?? ??? ???? ???? ?? ??? ??? ???. ?? ?? ???

Information and documentation-International Standard Musical Work Code (ISWC)

SJ/T 11292-2003 计算机用液晶显示器通用规范

General specification for computer for liquid crystal display device

KS X ISO 15706:2003 信息和文献工作.国际标准视听数码(ISAN)

? ??? ??? ??? ??? ? ??? ??? ?? ??? ?? ?? ???? ??

Information and documentation-International Standard Audiovisual Number(ISAN)

KS C 9709-2003 分布式控制系统主处理装置的性能评估方法

이 규격은 분산 제어 시스템에 사용되는 주처리 장치의 성능 평가 방법에 대하여 규정한다

Performance method of main process unitfor distributed control system

DLA SMD-5962-03201 REV A-2003 3伏特硅单片正固定低压差线性稳压器

This drawing documents two product assurance class levels consisting of high reliability (device classes Q andM) and space application (device class V).

MICROCIRCUIT, LINEAR, POSITIVE, FIXED, 3 V, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON

DLA SMD-5962-03203-2003 硅单片1048 X 8比特双极可程序化只读存储器的数字记忆微型电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, choices of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, MEMORY, DIGITAL, 2048 X 8-BIT BIPOLAR PROM, MONOLITHIC SILICON

DLA SMD-5962-03202-2003 硅单片1024 X 8比特双极可程序化只读存储器的数字记忆微型电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, choices of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, MEMORY, DIGITAL, 1024 X 8-BIT BIPOLAR PROM, MONOLITHIC SILICON

ASTM F2292-03e1 用四种不同的方法测定用喷墨打印机制作的图像耐水性的标准实施规范.滴注、喷射、浸水和摩擦

This procedure may be used to determine how water will affect solid-fill color images produced by ink jet printers. Four different test methods are outlined to simulate the most common ways that materials are exposed to water. The method of water application may greatly affect the outcome of the test. While one or more of the test methods may be performed, to best qualify a product all four test methods should be used. The drip and spray test are evaluated visually, while the submersion and rub tests can be evaluated visually and instrumentally. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development.1.1 This practice covers methods that can be used to determine the waterfastness of an image produced by an inkjet printer. Waterfastness is determined by the presence of ink transferred from a specific printed area to a non-printed area, or to neighboring printed areas of a different color.1.2 This practice can be used to evaluate the waterfastness of the primary print colors (cyan, magenta, yellow and black), the secondary colors (red, blue and green) and composite black (cyan plus magenta plus yellow).This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods-Drip, Spray, Submersion and Rub

ASTM F2293-03(2008) 测定喷墨打印机打印图像的抗污染性的标准方法

This procedure may be used to determine how staining agents will affect color images produced by ink jet printers. Five different staining agents are used to determine stain resistance, mustard (yellow), coffee (black), cola, fruit punch, and water. Additional stains may be used as appropriate. The effect of the staining agent on the print patches is determined visually. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development.1.1 This practice covers methods that can be used to determine the stain resistance of an image produced by an ink jet printer. Stain resistance is determined by placing a staining agent on printed patches and visually observing a change to the patches after the staining agent has been removed.1.2 This practice can be used to evaluate the primary print colors (cyan, magenta, yellow and black), the secondary colors (red, blue and green) and composite black (cyan plus magenta plus yellow).1.3 The values stated in SI Units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers

ASTM F2292-03 用四种不同的方法测定用喷墨打印机制作的图像耐水性的标准实施规范.滴注、喷射、浸水和摩擦

1.1 This practice covers methods that can be used to determine the waterfastness of an image produced by an inkjet printer. Waterfastness is determined by the presence of ink transferred from a specific printed area to a non-printed area, or to neighboring printed areas of a different color.1.2 This practice can be used to evaluate the waterfastness of the primary print colors (cyan, magenta, yellow and black), the secondary colors (red, blue and green) and composite black (cyan plus magenta plus yellow).1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods8212;Drip, Spray, Submersion and Rub

ASTM F2293-03 测定用喷墨打印机制作的图像耐沾污性的标准实施规范

This procedure may be used to determine how staining agents will affect color images produced by ink jet printers. Five different staining agents are used to determine stain resistance, mustard (yellow), coffee (black), cola, fruit punch, and water. Additional stains may be used as appropriate. The effect of the staining agent on the print patches is determined visually. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development.1.1 This practice covers methods that can be used to determine the stain resistance of an image produced by an ink jet printer. Stain resistance is determined by placing a staining agent on printed patches and visually observing a change to the patches after the staining agent has been removed.1.2 This practice can be used to evaluate the primary print colors (cyan, magenta, yellow and black), the secondary colors (red, blue and green) and composite black (cyan plus magenta plus yellow).1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers

ANSI/INCITS/ISO 7064:2003 数据处理.校验字符系统

Specifies a set of check character systems capable of protecting strings against errors which occur when people copy or type data.

Information technology - Security techniques - Check character systems

ASTM F2292-03(2008) 用四种不同的方法测定用喷墨打印机制作的图像耐水性的标准实施规范

This procedure may be used to determine how water will affect solid-fill color images produced by ink jet printers. Four different test methods are outlined to simulate the most common ways that materials are exposed to water. The method of water application may greatly affect the outcome of the test. While one or more of the test methods may be performed, to best qualify a product all four test methods should be used. The drip and spray test are evaluated visually, while the submersion and rub tests can be evaluated visually and instrumentally. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development.1.1 This practice covers methods that can be used to determine the waterfastness of an image produced by an inkjet printer. Waterfastness is determined by the presence of ink transferred from a specific printed area to a non-printed area, or to neighboring printed areas of a different color. 1.2 This practice can be used to evaluate the waterfastness of the primary print colors (cyan, magenta, yellow and black), the secondary colors (red, blue and green) and composite black (cyan plus magenta plus yellow). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methodsx2014;Drip, Spray, Submersion and Rub

ASTM F2294-03 测定打印介质可写性的标准实施规范

In practical applications, customers often write information on the face side and back side of print media using various writing implements. It is desirable that that the writing implements write legibly and do not skip or smear. This test is performed using writing implements commonly used in the home and office to ensure that good writing quality is obtained. This practice may be used to determine the writeability of a variety of print media including inkjet media, electrophotographic media, silver halide media and printing paper. Seven different writing implements are used to determine writeability; three types of balpoint pens, No. 2 pencil, washable marker, marker (regular tip), crayons. Additional writing implements may be used as appropriate. Note 18212;Pens should have regular point tips. Ballpoint pens from several manufacturers should be used. Writeability is determined visually. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development.1.1 This practice covers a method for determining the writeability of print media.1.2 Writeability is determined by writing on the face side and backside of print media with a variety of writing implements and visually assessing the writing quality and the propensity of the writing material to smear.1.3 This practice can be used to evaluate the writeability of a variety of print media including inkjet media, electrophotographic media, silver halide media and printing paper.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Writeability of Print Media

AIR FORCE QPL-83870-15-2003 飞机等速驱动器相对20微米可任意处理的滤芯

This list has been prepared for use by or for the government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

FILTER ELEMENT, DISPOSABLE, 20 MICRON ABSOLUTE, CONSTANT SPEED DRIVE, AIRCRAFT

ISO/IEC 9995-7:2002 信息技术.文本和办公系统键盘布局.第7部分:功能表示用的符号

Within the general scope described in ISO/IEC 9995-1, this part of ISO/IEC 9995 specifies symbols for functions found on any type of numeric, alphanumeric or composite keyboards. Each of these symbols is intended to be considered as universal and non-language related equivalent of names for the function they represent. Names of functions and descriptions are given in English and French.

Information technology - Keyboard layouts for text and office systems - Part 7: Symbols used to represent functions

SJ/T 11270-2002 信息技术 鼠标器通用规范

本规范规定了鼠标器的分类、要求、试验方法、检验规则、包装、标志、运输、贮存等。 本规范适用于计算机的外部设备鼠标器。

Information technology - General specification for mouse

IEC TR 62291:2002 多媒体数据存储.UDF基文件体系的应用程序接口

Specifies an application program interface (API) for reading and writing the files which conform to the Universal Disk Format (UDF) specification revision 2.00 developed by the Optical Storage Technology Association (OSTA) and its security extension.

Multimedia data storage - Application program interface for UDF based file systems