L94 电子设备机械结构件 标准查询与下载

NF C93-476-2:2000 电子设备的机械结构.室外外壳.第2部分:分规范.外壳和壳体的配合尺寸

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2 : sectional specification - Coordination dimensions for cases and cabinets.

NF C93-476-1:2000 电子设备的机械结构.室外外壳.第1部分:设计指南

Mechanical structures for electronic equipment - Outdoor enclosures - Part 1 : design guidelines.

JEDEC JESD51-10-2000 通孔视野有引线的封装热测量的测试板

This specification covers through-hole mount perimeter leaded packages intended to be mounted on a PCB. It does not cover area array packages that require sockets or PGA packages.

Test Boards for Through-Hole Perimeter Leaded Package Thermal Measurements

IEC 60917-1:1998/AMD1:2000 电子设备用机械结构设计模型化规则 第1部分:通用标准 修改1

This is Amendment 1 to IEC 60917-1-1998 (Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard)

Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard; Amendment 1

GEIA EIA-830-2000 整体米制应用于征购的模式

In this era of "faster, better, and cheaper", Performance Based Acquisition (PBA) of products and services requires management based on analysis of value-added metrics (cost, schedule, and performance).

Model for Integrating Metrics into the Procurement Process

IEC 61969-2-1:2000 电子设备用机械结构 室外机壳 第2-1部分:详细规范 机箱尺寸

This part of IEC 61969 contains application dimensions for cabinets. These dimensions have been derived by selection from the sectional specification IEC 61969-2 and follow the cabinet mounting dimensions given in IEC 60917-2-1. This ensures equal mounting dimensions for the equipment in both indoor and outdoor cabinets.

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-1: Detail specification - Dimensions for cabinets

IEC 61969-2-2:2000 电子设备用机械结构 室外机壳 第2-2部分:详细规范 机盒尺寸

This part of IEC 61969 contains application dimensions for cases. The dimensions have been derived by selection from the sectional standard IEC 61969-2 and follow the equipment mounting dimensions given in IEC 60917-2-1. NOTE There is a close similarity to outdoor cabinets as far as the equipment mounting dimensions are concerned. Due to the smaller dimensions of cases, the increments are also smaller compared to outdoor cabinets.

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-2: Detail specification - Dimensions for cases

IEC 61969-2:2000 电子设备用机械结构 室外机壳 第2部分:分规范 机盒和机箱配合尺寸

This part of IEC 61969 applies to all fields of mechanical, electromechanical and electronics installations in the outdoor environment. This sectional specification is applicable for the development of detail specifications for cases and cabinets exposed to the outdoor environ-ment on non-weather-protected locations. It specifies the internal and external coordination dimensions and pitches for outdoor enclosures consisting of cases and cabinets. The internal and external coordination dimensions are derived from IEC 60917-2. The internal dimensions will both meet the mounting dimensions of subracks in accordance with IEC 60917-2-2 and IEC 60297-3. The external dimensions, compared to IEC 60917-2, are partly increased in order to meet the design requirements of the outdoor climatic conditions. The purpose of this standard is to ensure compatibility of outdoor enclosures concerning the external and internal interface dimensions.

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Sectional specification - Coordination dimensions for cases and cabinets

GEIA GEB1-2000 减少制造来源和物质短缺管理作法

Diminishing Manufacturing Sources and Material Shortages (DMSMS) is the loss or impending loss of manufacturers or suppliers of critical items and raw materials due to production discontinuance.

Diminishing Manufacturing Sources and Material Shortages (DMSMS) Management Practices

IEC 61969-1:1999 电子设备用机械结构 室外机壳 第1部分:设计指南

This part of IEC 61969 gives guidelines for the design of outdoor enclosures and is applicable over a wide field of mechanical, electromechanical and electronic equipment and its installation where a modular design is used. The objective of this standard is to provide an overview of specifications for enclosures focused on requirements for outdoor applications at non-weather-protected locations. These enclosures are considered to contain any equipment and provide protection for the outdoor installed facilities against unwanted environmental impacts (see figure 1). The installed equipment may be, but is not limited to, subracks according to IEC 60917-2-2 or IEC 60297-3.

Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines

IEC 60297-4:1999 电子设备机械结构件.482,6mm(19in)系列机械结构尺寸.第4部分:辅助框架和相关插头元件.附加尺寸

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions

IEC 61587-1:1999 电子设备用机械构件 IEC 60917和IEC 60297的试验 第1部分:机箱、构柜、分机柜和机架的气候试验、机械试验和安全性能

This part of IEC 61587 specifies mechanical tests, climatic tests and safety aspects for cabinets, racks, subracks and chassis as defined in the detail standards of IEC 60917 and IEC 60297 for indoor and outdoor applications. It applies in whole or part only to the mechanical structures for electronic equipment practices according to IEC 60297 and IEC 60917 and does not apply to electronic equipment or systems. The object of this standard is to ensure physical integrity and environmental performance in cabinets, racks, subracks and chassis, taking into account the need for different levels of performance in different applications. It is intended to give the user a level of confidence in the selection of an equipment practice to meet his specific needs.

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis

NF C01-581/A1:1999 NF C01-581-1982的修改件1

Modification 1 of NF C01-581-1982

IEC 60297-4/AMD1:1999 电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸 第4部分:分机柜和相关插入单元.附加尺寸 修改1

Mechanical structures for electronical equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions; Amendment 1

JIS C 6010-1:1998 电子设备操作规程用机械构件研制的模块排序.第1部分:电子设备操作规程用机械构件研制的模块排序一般标准

この規格は，機器の実装構造にかかわるものである。モジュラオーダは，イングフェイス寸沃が考慮された様々な設置条件に配置する電子装置の主な構造寸法系に適用できる。

Modular order for the development of mechanical structures for electronic equipment practices -- Part 1: Generic standard for modular order for the development of mechanical structures for electronic equipment practice

JIS C 6010-2:1998 电子设备操作规程用机械构件研制的模块排序.第2部分:分规范.25 mm 设备操作规程的接口配合尺寸

この規格は，モジューノレ設計の装置及び設備を用いているすべての分野の電子機器に適用てきる。

Modular order for the development of mechanical structures for electronic equipment practices -- Part 2: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice

IEC 60917-1:1998 电子设备用机械结构设计模型化规则 第1部分:通用标准

This International Standard relates to equipment practices. The modular order is applicable to the main structural dimensions of electronic equipment mounted in various installations where dimensional interfaces have to be considered. It refers to basic design parameters and is not intended to be used for manufacturing tolerances or clearances. In addition, information on interfaces to other technical fields, on technology and advanced design aspects is included. This standard also covers standard terms for parts and assemblies of mechanical structures for electronic equipment. This generic standard gives the definitions of a modular order for mechanical structures of electronic equipment and provides for dimensional compatibility at mechanical interfaces with related engineering applications, e.g. printed boards, components, instrumentation, furniture, rooms, buildings, etc. Furthermore, it supports the introduction and application of the modular order rules considering that: - compatibility of interface dimensions is aimed at the electronic field on the basis of the SI un it met re; - technical and economic advantages can be achieved when using the rules. The terms in this standard should be used in all standards for mechanical structures of electronic equipment and in related technical documents.

Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard

GEIA EIA-599-A-1998 国家电子工艺认证标准

This standard applies to the interconnection of data terminal equipment and numerical control equipment at the tape reader interface. The data terminal would typically be connected to a remote data source/sink such as a computer.

National Electronic Process Certification Standard

GEIA 601-A-1998 电子元器件性能批准的一般步骤

The intent of this document is to extend conventional passive electronic component product qualification to limited product groupings or families. The limitations are prescribed in product detail specifications. The technology and facilities used in the

General Procedure for Capability Approval of Electronic Components

GEIA EIA-738-1997 Cpk的使用和应用指南

Given the clear relationship between superior quality offerings (goods or services) and superior business performance, many businesses have found it desirable to measure the progress of their multifaceted quality improvement efforts.One technique that can be utilized as a quality improvement monitor, as well as a driver for a quality improvement effort, is the process capability index (Cpk). This technique, introduced in EIA-557 titled "Statistical Process Control Systems", relates performance to specifications on selected quality-related characteristics.

Guideline on the Use and Application of Cpk