M14 通信网传输系统接口 标准查询与下载

ITU-T Q.3220-2010 网络附件控制功能(NACF)信令接口推荐性规范的体系结构框架.11号研究组

This Recommendation specifies a concrete realization of the functional architecture of the network attachment control functions (NACF), including the specification of the physical entities involved in network attachment control signalling, the interfaces across which signalling takes place, and the mapping between these entities and interfaces and the corresponding functional entities and reference points.

Architectural framework for NACF signalling interface Recommendations (Study Group 11)

ITU-T Q.3222-2010 (预发布)用于物理实体的交通位置管理的下一代网络(NGN)接口的要求及协议

This Recommendation defines the requirements and protocol for the Ng interface between transport location management physical entities. The Ng reference point enables communication between Local and Home transport location management functional entities (TLM-PEs).

(Pre-Published) Requirements and protocol at the Ng interface between transport location management physical entities

ANSI/SCTE 23-1-2010 电缆数据服务接口规范1.1第1部分:无线电频率界面

This document defines the radio-frequency interface specifications for high-speed data-over-cable systems. They were developed for the benefit of the cable industry, including contributions by operators and vendors from North America, Europe, and other regions.

DOCSIS 1.1 Part 1: Radio Frequency Interface

ANSI/SCTE 23-3-2010 电缆数据服务接口规范(DOCSIS)1.1.第3部分:操作支持系统接口

This standard defines the Network Management requirements for support a DOCSIS 1.1 environment. More specifically, the specification details the SNMP v3 protocol and how it coexists with SNMP V1/V2. The RFCs and Management Information Base (MIB) requirements are detailed as well as interface numbering, filtering, event notifications, etc.

DOCSIS 1.1 Part 3: Operations Support System Interface

ANSI/SCTE 137-2-2010 模块化前端结构.第2部分:模块化电缆数据机终端系统(M-CMTS)下行外部物理层(PHY)接口

This document defines an interface known as the Downstream External PHY Interface (DEPI) and associated protocol requirements for the transport of downstream user data between the M-CMTS Core and the EQAM. It describes the characteristics of the DEPI interface, provides requirements that must be met by the M-CMTS Core and the EQAM, and also describes various aspects of technical issues that are involved in the implementation and deployment of a DOCSIS system using the M-CMTS architecture.

Modular Head End Architecture Part 2: M-CMTS Downstream External PHY Interface

ANSI/SCTE 137-3-2010 模块化前端架构.第3部分:M-CMTS支援系统接口

This specification defines the Network Management requirements to support a Modular Cable Modem Termination System (M-CMTS) for headend components compliant to DOCSIS. The purpose of this document is to define the management requirements for the M-CMTS architecture that enables an effective operation of the M-CMTS components.

Modular Headend Architecture Part 3: M-CMTS Operations Support System Interface

ANSI/SCTE 26-2010 防止拷贝的主页数据网络接口规范

The need for interfaces between cable set top boxes and digital television (DTV) receivers is one element of a general movement to interconnect multiple audio/visual (A/V) devices on a common bus or network. The IEEE 1394 interface has emerged as the preferred tool to accomplish this goal. This specification contains requirements and options for an IEEE 1394 digital interface between a cable TV set top box (called a Host Device in this standard because it "hosts" a removable security module), and a DTV receiver.

Home Digital Network Interface Specification with Copy Protection

ANSI/SCTE 133-2010 电缆调制解调器终端系统用下游射频(RF)接口

This document defines the downstream radio-frequency interface [DRFI] specifications for: an edgeQAM (EQAM) modular device, an integrated Cable Modem Termination System [CMTS] with multiple downstream channels per RF port, or an integrated CMTS beyond DOCSIS 2.0.

Downstream RF Interface for Cable Modem Termination Systems

ANSI/TIA-102.BAEG-2010 移动数据外围接口

Mobile Data Peripheral Interface

DIN EN 300175-4:2009 数字增强型无绳通信(DECT).通用接口(CI).第4部分:数据链路控制(DLC)层(采用EN 300175-4 V2.2.2 (2009-02)英文版本标准作为德国标准)

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 4: Data Link Control (DLC) layer (Endorsement of the English version EN 300175-4 V2.2.2 (2009-02) as German standard)

NF Z82-814*NF EN 301814:2009 内部网络接口信号协议的ETSI签署(ATM规范ATM Inter-Network接口(AINI)F-CS-0125-000(1999)修改件)(V1-2-2)

ETSI endorsement of ATM Inter-Network Interface (AINI) signalling specification (ATM Forum Specification ATM Inter-Network Interface (AINI) F-CS-0125.000 (1999), modified) (V1.2.2).

YD/T 1877-2009 800MHz/2GHz cdma2000数字蜂窝移动通信网高速分组数据(HRPD)(第二阶段)空中接口测试方法.网络兼容性

本标准规定了800MHz/2GHz cdma2000数字蜂窝移动通信网中，高速分组数据(HRPD)(第二阶段)空中接口测试方法的网络兼容性测试内容。 本标准适用于800MHz/2GHz cdma2000数字蜂窝移动通信网中，高速分组数据(HRPD)第二阶段技术的数字蜂窝移动通信系统的AT和接入网络。本标准也适用于基于高速分组数据(HRPD)第一阶段开发的AT。本标准适用于支持UIM 卡(机卡分离)及不支持UIM卡(机卡一体)的800MHz/2GHz cdma2000高速分组数据(HRPD)的AT。 对于仅支持cdma2000 HRPD业务功能的单模AT，双模混合模式以及需要cdma2000功能业务的测试项目不适用。对于同时支持HRPD业务功能和cdma2000业务功能的双模接入终端，双模混合模式及需要cdma2000功能业务的测试项目适用。

Test Method for(HRPD)(Phase 2)Air Interface in 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks.Network Compatibility

DIN EN 300175-8:2009 数字增强无线远程通信(DECT) 通用接口(CI) 第8部分:语音编码和传输

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 8: Speech and audio coding and transmission (Endorsement of the English version EN 300175-8 V2.2.1 (2009-02) as German standard)

DIN EN 300175-7:2009 数字增强型无绳通信(DECT) 通用接口(CI) 第7部分:安全特征

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 7: Security features (Endorsement of the English version EN 300175-7 V2.2.1 (2008-11) as German standard)

DIN EN 300175-2:2009 数字增强型无绳通信(DECT).通用接口(CI).第2部分:物理层(PHL)

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 2: Physical Layer (PHL) (Endorsement of the English version EN 300175-2 V2.2.1 (2008-11) as German standard)

DIN EN 300175-1:2009 数字增强型无绳通信(DECT) 通用接口(CI) 第1部分:概述

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 1: Overview (Endorsement of the English version EN 300175-1 V2.2.1 (2008-11) as German standard)

DIN EN 300175-5:2009 数字增强型无绳通信(DECT) 通用接口(CI) 第5部分:网络(NWK)层

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 5: Network (NWK) layer (Endorsement of the English version EN 300175-5 V2.2.1 (2008-11) as German standard)

DIN EN 300175-3:2009 数字增强型无绳通信(DECT).通用接口(CI).第3部分:媒体访问控制(MAC)层

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 3: Medium Access Control (MAC) layer (Endorsement of the English version EN 300175-3 V2.2.1 (2008-11) as German standard)

DIN EN 300175-6:2009 数字增强型无绳通信(DECT) 通用接口(CI) 第6部分:识别和寻址

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 6: Identities and addressing (Endorsement of the English version EN 300175-6 V2.2.1 (2008-11) as German standard)

DIN EN 61968-13:2009 电业应用综合.分配管理的系统接口.第13部分:分配用通讯接口模块(CIM)RDF模型交换格式

This part of IEC 61968 specifies the format and rules for exchanging modeling information based upon the CIM (Common Information Model) and related to distribution network data. The intention of this part of IEC 61968 is to allow the exchange of instance data in bulk. Thus, the imported network model data should be sufficient to allow performing network connectivity analysis, including network tracing, outage analysis, load flow calculations, etc. This part could be used for synchronizing geographical information system databases with remote control system databases. This part is closely linked to IEC 61970-452 Energy Management System Application Program Interface (EMS-API) CIM Network applications model exchange specification. Thus, this document has been written in order to reduce its maintenance. It describes only differences with IEC 61970- 452. Nevertheless, as IEC 61970-452 is a future international standard, this part still has duplicate information with IEC 61970-452, in order to be more understandable. It uses the CIM RDF1) Schema presented in IEC 61970-501 as the meta-model framework for constructing XML2) documents containing power system modeling information. The syntax of these documents is called CIM XML format. Model exchange by file transfer serves many useful purposes, specially when some applications need to have the complete network model defined. Though the format can be used for general CIM-based information exchange, in this part of IEC 61968, specific profiles (or subsets) of the CIM are identified in order to address particular exchange requirements. Given the CIM RDF Schema described in IEC 61970-501, a DMS power system model can be converted for export as an XML document, see Figure 1. This document is referred to as a CIM XML document. All of the tags (resource descriptions) used in the CIM XML document are supplied by the CIM RDF schema. The resulting CIM XML model exchange document can be parsed and the information imported into a foreign system. This part of IEC 61968 is aligned to CIM Model version 11, CPSM 3.0 profile.

Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution (IEC 61968-13:2008); English version EN 61968-13:2008