N56 环境监测仪器及其成套装置 标准查询与下载

DIN EN 50291-2:2010 住宅处所中一氧化碳探测用电气设备.第2部分:娱乐车辆和类似经营场所包括娱乐船中固定装置连续运转用电气设备.附加试验方法和性能要求.德文版本EN 50291-2-2010

Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test met

DIN EN 50291-1:2010 室内一氧化碳探测用电气设备.第1部分:试验方法和性能要求.德文版本EN 50291-1-2010

Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements; German version EN 50291-1:2010

NF M60-517:2010 参考源.表面污染监测仪的校准- α发射体,β发射体和光子发射体.

Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters.

JJF 1263-2010 六氟化硫检测报警仪校准规范

本规范适用于六氟化硫检测报警仪(以下简称仪器)的校准。用于检测六氟化硫的检漏仪及与六氟化硫有关的其他检测仪器,可参照本规范的全部项目或部分项目进行校准。

Calibration Specification for the Alarmer Detector of Sulfur Hexafluoride

NF C23-571:2010 可燃气体,有毒气体或氧气的检测和测量用电气设备.设备用软件和/或数字技术的要求和测试.

Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.

BS PD CEN/TR 16013-1:2010 工作场所暴露.气溶胶监测用直接读数仪的使用.第1部分: 特殊用途监控器的选择

This Technical Report describes the principles underlying the evaluation of one or more aerosol fractions using direct-reading aerosol monitors. The currently available methods for monitoring levels of aerosols in workplaces for a range of different purposes are described and details are given of their limits and possibilities in the field of occupational hygiene. The document does not cover the sampling of aerosols for compliance with occupational exposure limits or the collection of aerosol particles for subsequent analysis.

Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 1: Choice of monitor for specific applications

NF X43-354*NF EN 15859:2010 空气质量.固定排放源使用的自动灰尘阻止设备监控器的认证.性能标准和试验规程

Air quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures.

NF C23-591-1:2010 住宅楼内一氧化碳监测用电气设备.第1部分:试验方法和性能要求

Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1 : test methods and performance requirements.

NF C23-591-2*NF EN 50291-2:2010 探测住宅内一氧化碳用电气装置.第2部分:娱乐车辆和包括娱乐船只的类似处所内固定装置的连续操作用电气设备.附加的测试

Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2 : electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test me

BS ISO 26142:2010 氢气检测装置.固定式应用

Hydrogen detection apparatus - Stationary applications

BS EN 15859:2010 空气质量.固定源用自动集尘器监测装置的认证.性能标准和试验规程

This European Standard provides the performance criteria and test procedures for filter dust monitors and filter leakage monitors used to ensure that dust arrestment plants used on stationary sources are working satisfactorily. A filter dust monitor is a dust arrestment plant monitor which can be calibrated in mass concentration units (e.g. mg/m3) and used for dust arrestment control purposes. A filter leakage monitor is a dust arrestment plant monitor which indicates a possible problem with the dust arrestment plant by monitoring a change in the emissions level or a change in the magnitude of the dust pulses created by the cleaning process. This standard is intended for use with the certification procedure for automated measuring systems described in EN 15267-1 and EN 15267-2.

Air quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures

BS PD CEN/TR 16013-2:2010 工作场所的暴露.气溶胶监测用直读式仪器的使用指南.第2部分: 使用光学粒子计数器评定悬浮粒子浓度

This Technical Report describes the principle underlying evaluation of one or more health related aerosol fractions using an optical particle counter and details its limits and possibilities in the field of occupational hygiene. The method complements conventional long-term aerosol particle sampling and offers possibilities of: -instantaneous (direct reading) measurement; -time-related monitoring; -investigation of space-related aerosol evolution (mapping); -assessment of particle size distribution.

Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters

BS EN 838:2010 工作场所暴露.用扩散取样器测量气体和水蒸汽用程序.要求和试验方法

This European Standard specifies performance requirements and test methods under prescribed laboratory conditions for the evaluation of diffusive samplers and of procedures using these samplers for the determination of gases and vapours in workplace atmospheres. This European Standard is applicable to diffusive samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.

Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods

ANSI/ISA 92.00.01-2010 毒气探测器性能要求

This standard provides minimum requirements for the construction, performance, and testing of portable, transportable, mobile, and stationary electrical apparatus whose purpose is for the detection, measurement and notification of toxic gas in air that are used to enhance the safety of personnel in commercial and industrial locations.

Performance Requirements for Toxic Gas Detectors

HJ 477-2009 污染源在线自动监控(监测)数据采集传输仪技术要求

本标准规定了污染源在线自动监控(监测)系统中数据采集传输仪(以下简称数据采集传输仪)的技术性能要求和性能检测方法。 本标准适用于数据采集传输仪的选型使用和性能检测:对于污染源在线自动监控(监测)系统中具有数据采集传输功能的现场监测仪表，只规定其用于数据采集传输功能部分的性能指标和校验方法。

The technical requirement for data acquisition and transmission equipment of pollution emission auto monitoring system

DIN EN 15267-2:2009 空气质量.自动测量系统的认证.第2部分:AMS制造商质量制造过程的管理体系和认证后监管的初步评估.英文版本DIN EN 15267-2-2009-07

This European Standard specifies the requirements for the manufacturer's quality management system, the initial assessment of the manufacturer's production control and the continuing surveillance of the effect of subsequent design changes on the performance of certified automated measuring systems. This European Standard also serves as a reference document for auditing the manufacturer's quality management system.

Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturers quality management system and post certification surveillance for the manufacturing process; English version of DIN EN 15267-2:2009-07

DIN EN 15267-1:2009 空气质量.自动测量系统的质量保证.第1部分:一般原则.英文版本DIN EN 15267-1-2009-07

This European Standard specifies the general principles, including common procedures and requirements, for the product certification of automated measuring systems (AMS) for monitoring ambient air quality and emissions from stationary sources. This product certification consists of the following sequential stages: a) performance testing of an automated measuring system; b) initial assessment of the AMS manufacturer's quality management system; c) certification; d) surveillance. This European Standard applies to the certification of all AMS for monitoring ambient air quality and emissions from stationary sources for which performance criteria and test procedures are available in European Standards.

Air quality - Certification of automated measuring systems - Part 1: General principles; English version of DIN EN 15267-1:2009-07

BS ISO 15337:2009 环境空气.气相滴定.臭氧分析仪的校准

Ambient air - Gas phase titration - Calibration of analysers for ozone

BS EN 50194-1:2009 家用易燃气体检测用电气设备.试验方法和性能要求

This European Standard specifies general requirements for the construction, testing and performance of electrically operated apparatus for the detection of combustible gases, designed for continuous operation in a fixed installation in domestic premises. The apparatus may be mains or battery powered. Additional requirements for apparatus to be used in recreational vehicles and similar premises are specified in EN 50194-2. NOTE 1 For caravan holiday homes EN 50194-1 applies. This European Standard specifies two types of apparatus to operate in the event of an escape of town gas, natural gas or liquefied petroleum gas (LPG): - Type A apparatus - to provide a visual and audible alarm and an executive action in the form of an output signal that may actuate directly or indirectly a shut-off device and/or other ancillary device; - Type B apparatus - to provide a visual and audible alarm only. This European Standard excludes apparatus for the detection of toxic hazards of gases such as carbon monoxide (see EN 50291-1 and EN 50291-2). Apparatus complying with this standard is not considered suitable for industrial or commercial installations for which EN 60079-29-1 apply. NOTE 2 Apparatus tested in accordance with EN 60079-29-1 will not necessarily comply with this European Standard.

Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements

BS EN 15267-2:2009 空气质量.自动测量系统的认证.第2部分:AMS制造商的质量管理系统的初始评估和制造工艺的认证后监督

This European Standard specifies the requirements for the manufacturer’s quality management system, the initial assessment of the manufacturer’s production control and the continuing surveillance of the effect of subsequent design changes on the performance of certified automated measuring systems. This European Standard also serves as a reference document for auditing the manufacturer’s quality management system.

Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer's quality management system and post certification surveillance for the manufacturing process