N56 环境监测仪器及其成套装置 标准查询与下载

HJ/T 378-2007 污染治理设施运行记录仪技术要求及检测方法

本标准规定了污染治理设施运行记录仪的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于自动监视和记录以电为动力的各种污染治理设施运行状态的记录仪。

Technical requirement and test procedures for operation recorder of pollution treatment facility

KS C 6591-2007 可燃气体检测器的安装、操作和维护

1.1 이 규격은 KS C 6590(가연성 가스감지기의 성능시험방법)의 성능요건을 만족시키

Installation, operation and maintenance of combustible gas detection instruments

KS C 6590-2007 可燃气体探测器的性能测试方法

1.1 이 규격은 인명을 보호하기 위해 공기 중의 가연성 가스 함유량을 감지하는 전기 기기

Performance requirements for combustible gas detectors

IEC 60079-29-1:2007 爆炸性环境.第29-1部分:气体探测器.易燃气体探测器的性能要求

This part of IEC 60079-29 specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed apparatus for the detection and measurement of flammable gas or vapour concentrations with air. The apparatus, or parts thereof, are intended for use in potentially explosive atmospheres (see 3.1.8) and in mines susceptible to firedamp. This standard is also applicable when an apparatus manufacturer makes any claims regarding any special features of construction or superior performance that exceed these minimum requirements. In these cases, all such claims should be verified and the test procedures should be extended or supplemented, where necessary, to verify the performance claimed by the manufacturer. When verifying the superior performance of one criterion, other performance criteria are not required to meet the standards minimum requirements, however, these reduced claimed performance criteria (as confirmed in the manufactures Installation Manual) should also be verified. (e.g. temperature range of 0 °C to 60 °C; 0 °C to 40 °C at ±10 % accuracy and 40 °C to 60 °C at ±15 % (manufacturers claimed accuracy). The additional tests should be agreed between the manufacturer and test laboratory and identified and described in the test report. This standard is applicable to flammable gas detection apparatus intended to provide an indication, alarm or other output function; the purpose of which is to give a warning of a potential explosion hazard and in some cases, to initiate automatic or manual protective action(s). This standard is applicable to apparatus, including the integral sampling systems of aspirated apparatus, intended to be used for commercial, industrial and non-residential safety applications. This standard does not apply to external sampling systems, or to apparatus of laboratory or scientific type, or to apparatus used only for process control purposes. It also does not apply to open path (line of sight) area monitors. For apparatus used for sensing the presence of multiple gases, this standard applies only to the detection of flammable gas or vapour. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of IEC 60079-29-1 will take precedence.

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-2:2007 爆燃性环境.第29-2部分:气体探测器.易燃气体和氧用探测器的选择、安装、使用和维护

This part of IEC 60079-29 gives guidance on, and recommended practice for, the selection, installation, safe use and maintenance of electrically operated group II apparatus intended for use in industrial and commercial safety applications for the detection and measurement of flammable gases complying with the requirements of IEC 60079-29-1. This standard is applicable for oxygen measurement for the purpose of inertisation where explosion protection is provided by the exclusion of oxygen instead of measuring the combustible gases or vapours present. This standard is a compilation of practical knowledge to assist the user, and applies to apparatus, instruments and systems that indicate the presence of a flammable or potentially explosive mixture of gas or vapour with air by using an electrical signal from a gas sensor to produce a meter reading, to activate a visual or audible pre-set alarm or other device, or any combination of these. Such apparatus may be used as a means of reducing the risk whenever there is the possibility of a risk to life or property specifically due to the accumulation of a combustible gas-air mixture, by providing such warnings. It may also be used to initiate specific safety precautions (e.g. plant shutdown, evacuation, fire extinguishing procedures). This standard is applicable to all new permanent installations and, where reasonably practicable, to existing permanent installations. It is also applicable to temporary installations, whether new or existing. Similarly it is applicable to the safe use of portable or transportable apparatus, irrespective of the age or complexity of such apparatus. Since much modern apparatus of this type also includes oxygen deficiency detection and/or specific toxic gas sensors, some additional guidance is given for these topics.

Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

BS 8494:2007 计划用于检测和测量室内环境空气中二氧化碳的电子手提式和便携式设备.要求和试验方法

This British Standard specifies requirements for the construction, testing and performance of electronic portable and transportable apparatus for the detection and measurement of carbon dioxide (CO2) in indoor ambient air, which includes air entering mechanical ventilation systems in dwellings, commercial premises and industrial premises. This standard covers equipment to indicate up to typically 20 000 ppm (2%) CO2 in air. NOTE 1 The CO2 measuring capabilities of indoor air quality apparatus are covered by this standard. NOTE 2 The measurement capabilities of electronic portable and transportable apparatus that are additional to the measurement of CO2 are not covered in this standard. Other standards that cover these additional measurement capabilities include BS EN 50379 for electronic portable combustion gas analysers and BS EN 45544 for toxic gas detection apparatus having an alarm function for alerting an operator to an unsafe workplace atmosphere.

Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air - Requirements and test methods

HJ/T 354-2007 水污染源在线监测系统验收技术规范(试行)

1.1 本标准规定了水污染源在线监测系统的验收方法和验收技术指标。 1.2 本标准适用于己安装于水污染源的化学需氧量（COD）在线自动监测仪、总有机碳(TOC)水质自动分析仪、紫外(UV)吸收水质自动在线监测仪、 pH 水质自动分析仪、氨氮水质自动分析仪总磷水质自动分析仪、超声波明渠污水流量计、电磁流量计、水质自动采样器、数据采集传输仪等仪器的验收监测。

Technical specifications for check and acceptance of wastewater on-line monitoring system (on trial)

HJ/T 355-2007 水污染源在线监测系统运行与考核技术规范(试行)

1.1 本标准规定了运行单位为保障水污染源在线监测设备稳定运行所要达到的日常维护、校验、仪器检修、质量保证与质量控制、仪器档案管理等方面的要求，规定了运行的监督核查和技术考核的具体内容。 1.2 本标准适用于水污染源在线监测系统中的化学需氧量（COD）水质在线自动监测仪、总有机碳（TOC）水质自动分析仪、氨氮水质自动分析仪、总磷水质自动分析仪、紫外（UV）吸收水质自动在线监测仪、pH 水质自动分析仪、温度计、流量计等仪器设备运行和考核的技术要求。

Technical specifications for the operation and assessment of wastewater on-line monitoring system (on trial)

HJ/T 353-2007 水污染源在线监测系统安装技术规范(试行)

1.1 本标准规定了水污染源在线监测系统中仪器设备的主要技术指标和安装技术要求，监测站房建设的技术要求，仪器设备的调试和试运行技术要求。 1.2 本标准适用于安装于水污染源的化学需氧量（COD）水质在线自动监测仪、总有机碳（TOC）水质自动分析仪、紫外（UV）吸收水质自动在线监测仪、氨氮水质自动分析仪、总磷水质自动分析仪、pH 水质自动分析仪、温度计、流量计、水质自动采样器、数据采集传输仪的设备选型、安装、调试、试运行和监测站房的建设。

Technical guidelines of wastewater on-line monitoring equipments and installaaon(on trial)

HJ/T 356-2007 水污染源在线监测系统数据有效性判别技术规范(试行)

1.1 本标准规定了水污染源排水中化学需氧量（COD）、氨氮（NH-N）、总磷（TP）、 pH 值、温度和流量等监测数据的质量要求，数据有效性判别方法和缺失数据的处理方法。 1.2 本标准适用于水污染源排水中化学需氧量（COD）、氨氮（NH-N）、总磷（TP）、 pH 值、温度和流量等监测数据的有效性判别。

Technical specifications for validity of wastewater on-line monitoring data (on trial)

KS I 3223-2007 空气扩散器的氧气转移率测定试验方法

이 규격은 상수 및 하수 처리에 이용되는 판형, 돔형, 관형 및 디스크형 산기관의 산소전달

Testing methods for oxygen transfer rate of air diffuser

ANSI/ASTM E2411:2007 化学战蒸气探测器(CWVD)

This specification provides the technical and mission requirements for the use of a CWVD and relates each of the performance and electrical shock and fire parameters to a detector requirement.

Chemical Warfare Vapor Detector (CWVD)

GJB/J 5973-2007 二级双温双压法标准湿度发生器校准规范

本校准规范规定了双温双压法标准湿度发生器和双压法标准湿度发生器（以下简称湿度发生器）的计量特性、校准条件、校准项目、校准方法、校准结果的处理和复校时间间隔 ( 双温法标准湿度发生器 可参照执行 ) 。 本校准规范适用于新制造、使用中和修理后的湿度发生器的校准。

Calibration specifIcation for secondary standard two-temperature two-pressure humidity generator

GJB 5993-2007 舰船用氢分析器规范

本规范规定了舰船用氢分析器的要求、质量保证和交货准备等。 本规范适用于用热导原理设计、制造的连续自动分析和监测舰船密闭舱室内空气（混合气）中氢气含量的分析器（以下简称分析器）。

Specincation for hydrogen analyzers for naval ships

ARP 0108-2007 防爆仪器的监管要求

Deals with product conformity requirements for explosion-protected apparatus used in South Africa. It should be read in conjunction with SANS 10108.

Regulatory requirements for explosion-protected apparatus

JJG 1022-2007 甲醛气体检测仪检定规程

本规程适用于测量空气中甲醛含量的甲醛气体检测仪（以下简称仪器）的首次检定、后续检定和使用中的检验。

Verification Regulation of Formaldehyde Gas Analyzer

NF C23-570:2007 电磁兼容性.可燃气体、毒气或氧气的检测和测量用电气仪器

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.

UL 2034 BULLETIN-2007 单站和多站一氧化碳报警器UL安全性标准.评议提交截止日期:2007年2月19日

Clarification of Marking to Indicate Approval for Marine Use, Clarification of Instructions for Marine Use Alarms, Establishment of End-of-Life Requirements, Additional CO Performance Test.

UL Standard for Safety Single and Multiple Station Carbon Monoxide Alarms COMMENTS DUE: FEBRUARY 19, 2007

UL 2075 BULLETIN-2007 气体和蒸气探测器和传感器UL安全性标准.评议提交截止日期: 2006年2月19日

These requirements cover toxic and combustible gas and vapor detectors and sensors intended to be portable or employed in indoor or outdoor locations in accordance with the National Electrical Code, NFPA 70. A gas detector and/or sensor and/or vapor detector, as covered by these requirements, consists of an assembly of electrical components coupled with a sensing means inside a chamber, or by separate components to detect toxic and/or combustible gases or vapors. The detector includes provision for the connection to a source of power and signaling circuits. These requirements cover the following types of detectors: a) Detectors intended for monitoring the environment and detectors intended for open area protection and for connection to a compatible power supply or control unit for operation as part of gas detection or emergency signaling systems; b) Detectors intended solely for control of ventilation or shut off devices such as fans or control valves; c) Detectors intended for both the above applications; d) Sensors and sensing circuits intended for use with or in gas detectors, alarms or gas detection circuits within fuel cell systems; e) Portable gas detectors; f) Multi-gas gas detectors; g) Multi-gas sensors and h) Equipment intended for use in hazardous locations. Note, the equipment must comply with the applicable hazardous location requirements prior to evaluation to UL 2075. 1.3 These requirements also cover all remote accessories that are intended to be connected to a gas or vapor detector and/or sensor. 1.4 This standard does not cover the following: a) Control units to which the detectors are intended to be connected that are covered by the Standard for Control Units for Fire-Protective Signaling Systems, UL 864; b) Control units to which the detectors are intended to be connected that are covered by the Standard for General Purpose Signaling Devices and Systems, UL 2017; c) Self-contained single and multiple station carbon monoxide alarms or residential combustible gas detectors, not intended for connection to a system control unit, that are covered by the Standard for Single and Multiple Station Carbon Monoxide Alarms, UL 2034 or Residential Gas Detectors, UL 1484. 1.5 Users of these requirements will additionally need to ensure that influencing factors not addressed in this standard for the end product installation, such as mechanical movement, field placement of conductive material, and product damage, will not affect the system for insulation coordination or performance operation. Examples are the deformation of the enclosure, movement of the fittings for conduit or armored cable, or the improper installation of field wiring.

UL Standard for Safety Gas and Vapor Detectors and Sensors COMMENTS DUE: FEBRUARY 19, 2006

JIS B 7957 ERRATUM 1:2007 勘误

ERRATUM